Post-consumer polymeric wastes in form of low-density polyethylene (LDPE) can now be considered suitable as a precursor for the synthesis of low-cost activated carbon (AC). This study produced AC from LDPE using sulphuric acid (H 2 SO 4 ) and potassium hydroxide (KOH) as the activating agent. The reaction conditions for pyrolysis were varied in the range of 0.50 - 2.00 M, 400 ° C - 500 ° C, and 45 - 60 minutes. Physico-chemical investigations reveal that AC yield is significantly dependent on both carbonization temperatures and time. The obtained optimum values of 446.50 ° C and 51.09 mins gave a yield of 24% for the base-activated carbon. The high iodine numbers obtained strongly indicate the presence of large surface area and pore volumes is further confirmed using the Scanning Electron Microscopy (SEM) analysis which reveals the presence of pores on the external surface of the carbons. Fourier Transform Infrared Technique (FTIR) analysis further shows that the synthesized compounds are purely carbon with rich oxy-gen-surface complexes on the surface which is as a result of the introduction of the chemical oxidizing agents. The produced carbons were found to have high adsorption affinity for selected inorganic ions which are: Mn 7+ , Co 2+ , and Cr 6+ . Adsorption isotherm results show the adsorption process to be favourable with the Langmuir isotherm parameter RL having values of <1, while the Freudlich adsorption model was found to perfectly fit the data at selected adsorbent dosages and adsorbate concentrations. The pseu-do-second-order model provides the best correlation for the kinetic analysis. The acid-activated carbon was found to have better adsorption capacities than the base-activated carbon.
Al Othman, Z.A., Habila, M.A. and Ali, R. (2011) Preparation of Activated Carbon Using the Copyrolysis of Agricultural and Municipal Solid Wastes at a Low Carbonization Temperature. International Conference on Biology, Environment and Chemistry, Vol. 24, 67-72.
Onal, Y., Akmil-Basar, C., Sarıcı, O. and Erdogan, S. (2007) Textural Development of Sugar Beet Bagasse Activated with ZnCl 2 . Journal of Hazardous Materials, 142, 138-143. https://doi.org/10.1016/j.jhazmat.2006.07.070
Ademiluyi, F.T., Amadi, S.A. and Amakama, N.J. (2009) Adsorption and Treatment of Organic Contaminants Using Activated Carbon from Waste Nigerian Bamboo. Journal of Applied Sciences and Environmental Management, 13, 39-47. https://doi.org/10.4314/jasem.v13i3.55351
Buasri, A., Chaiyut, N., Loryuenyong, V., Phakdeepataraphan, E., Watpathomsub, S. and Kunakemakorn, V. (2013) Synthesis of Activated Carbon Using Agricultural Wastes from Biodiesel Production. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 7, 106-110.
Cunliffe, A.M. and Williams, P.T. (1999) Influence of Process Conditions on the Rate of Activation of Chars Derived from Pyrolysis of Used Tyres. Energy & Fuels, 13, 166-175. https://doi.org/10.1021/ef9801524
Diao, Y., Walawender, W.P. and Fan, L.T. (2002) Activated Carbons Prepared from Phosphoric Acid Activation of Grain Sorghum. Bioresource Technology, 81, 45-52. https://doi.org/10.1016/S0960-8524(01)00100-6
Lua, A.C. and Yang, T. (2005) Characteristics of Activated Carbon Prepared from Pistachio Nut Shell by Zinc Chloride Activation under Nitrogen and Vacuum Conditions. Journal of Colloid and Interface Science, 290, 505-513. https://doi.org/10.1016/j.jcis.2005.04.063
Legrouri, K., Khouya, E., Ezzine, M., Hannache, H., Denoyel, R., Pallier, R. and Naslain, R. (2005) Production of Activated Carbon from a New Precursor Molasses by Activation with Sulphuric Acid. Journal of Hazardous Materials, 118, 259-263. https://doi.org/10.1016/j.jhazmat.2004.11.004
Radhika, M. and Palanivelu, K. (2006) Adsorptive Removal of Chlorophenols from Aqueous Solution by Low Cost Adsorbent-Kinetics and Isotherm Analysis. Journal of Hazardous Materials, 138, 116-124. https://doi.org/10.1016/j.jhazmat.2006.05.045
Basar, C.A. (2006) Applicability of the Various Adsorption Models of Three Dyes Adsorption onto Activated Carbon Prepared Waste Apricot. Journal of Hazardous Materials, 135, 232-241. https://doi.org/10.1016/j.jhazmat.2005.11.055
Prakash Kumar, B.G., Shivakamy, K., Miranda, L.R. and Velan, M. (2006) Preparation of Steam Activated Carbon from Rubber Wood Sawdust (Hevea brasiliensis) and Its Adsorption Kinetics. Journal of Hazardous Materials, 136, 922-929. https://doi.org/10.1016/j.jhazmat.2006.01.037
Tan, I.A.W., Hameed, B.H. and Ahmad, A.L. (2007) Equilibrium and Kinetic Studies on Basic Dye Adsorption by Oil Palmfibre Activated Carbon. Chem. Eng. J., 127, 111-119. https://doi.org/10.1016/j.cej.2006.09.010
Wang, S.L., Tzou, Y.M., Lu, Y.H. and Sheng, G. (2007) Removal of 3-Chlorophenol from Water Using Rice-Straw-Based Carbon. Journal of Hazardous Materials, 147, 313-318. https://doi.org/10.1016/j.jhazmat.2007.01.031
Hameed, B.H., Ahmad, A.L. and Latiff, K.N.A. (2007) Adsorption of Basic Dye (Methylene Blue) onto Activated Carbon Prepared from Rattan Sawdust. Dyes Pigments, 75, 143-149. https://doi.org/10.1016/j.dyepig.2006.05.039
Guo, Y. and Rockstraw, D. (2007) Physicochemical Properties of Carbons from Pecan Shell by Phosphoric Acid Activation. Bioresource Technology, 98, 1513-1521. https://doi.org/10.1016/j.biortech.2006.06.027
Adinata, D., Wan Daud, W.M. and Aroua, M.K. (2007) Preparation and Characterization of Activated Carbon from Palm Shell by Chemical Activation with K2CO3. Bioresource Technology, 98, 145-149. https://doi.org/10.1016/j.biortech.2005.11.006
Tan, I.A.W., Hameed, B.H. and Ahmad, A.L. (2008) Optimization of Preparation Conditions for Activated Carbons from Coconut Husk Using Response Surface Methodology. Chemical Engineering Journal, 137, 462-470. https://doi.org/10.1016/j.cej.2007.04.031
Khalili, N.R., Campbell, M., Sandi, G. and Golas, J. (2000) Production of Micro- and Mesoporous Activated Carbon from Paper Mill Sludge: I. Effect of Zinc Chloride Activation. Carbon, 38, 1905-1915. https://doi.org/10.1016/S0008-6223(00)00043-9
Yang, J. and Qiu, K. (2011) Development of High Surface Area Mesoporous Activated Carbons from Herb Residues. Chemical Engineering Journal, 167, 148-154. https://doi.org/10.1016/j.cej.2010.12.013
Wever, D.A.Z., Heeres, H.J. and Broekhuis, A.A. (2012) Characterization of Physic Nut (Jatropha curcas L.) Shells. Biomass & Bioenergy, 37, 177-187. https://doi.org/10.1016/j.biombioe.2011.12.014
Jimenez-Cordero, D., Heras, F., Alonso-Morales, N., Gilarranz, M.A. and Rodríguez, J. (2014) Preparation of Granular Activated Carbons from Grape Seeds by Cycles of Liquid Phase Oxidation and Thermal Desorption. Fuel Processing Technology, 118, 148-155. https://doi.org/10.1016/j.fuproc.2013.08.019
Kamal, B. (2014) Roles of Additives in Linear Low Density Polyethylene (LLDPE) Films. 9.
Chung, C.I. (2010) Extrusion of Polymers: Theory and Practice. 2nd Edition, Hanser Publishers, Munich.
Ceresana, O. (2014) Market Survey Polyethylene-LLDPE (2nd Edition).
Prideaux, E. (2007) Plastic Incineration Rise Draws Ire. Japan Times.
Gonsalvesh, L., Marinov, S.P., Gryglewicz, G., Carleer, R. and Yperman, J. (2016) Preparation, Characterization and Application of Polystyrene Based Activated Carbons for Ni(II) Removal from Aqueous Solution. Fuel Processing Technology, 149, 75-85. https://doi.org/10.1016/j.fuproc.2016.03.024
ASTM D2867-09 (Standard Test Method for Determination of Moisture Content in Activated Carbon).
Al-Qodah, Z. and Shawabkah, R. (2009) Production and Characterization of Granular Activated Carbon from Activated Sludge. Brazilian Journal of Chemical Engineering, 26, 127-136. https://doi.org/10.1590/S0104-66322009000100012
ASTM D2866-94 (2004) Standard Test Method for Determination of Total Ash Content of Activated Carbon.
ASTM D4607-14 Standard Test Method for Determination of Iodine Number of Activated Carbon.
Brault, J.W. (1996) New Approach to High-Precision Fourier Transform Spectrometer Design. Applied Optics, 35, 2891-2896. https://doi.org/10.1364/AO.35.002891
Oatley, C.W., Nixon, W.C. and Pease, R.F.W. (1965) Scanning Electron Microscopy. Advances in Electronics and Electron Physics, 21, 181-247. https://doi.org/10.1016/S0065-2539(08)61010-0
Shittu, T.D., Aransiola, E.F. and Alabi-Babalola, O.D. (2020) Adsorption Performance of Modified Sponge Gourd for Crude Oil Removal. Journal of Environmental Protection, 11, 65-81. https://doi.org/10.4236/jep.2020.112006
Ayawei, N., Ebelegi, A. and Wankasi, D. (2017) Modelling and Interpretation of Adsorption Isotherms. Journal of Chemistry, 2017, Article ID: 3039817. https://doi.org/10.1155/2017/3039817
Foo, K. and Hameed, B. (2010) Insights into the Modeling of Adsorption Isotherm Systems. Chemical Engineering Journal, 156, 2-10. https://doi.org/10.1016/j.cej.2009.09.013
Vadi, M., Mansoorabad, A., Mohammadi, M. and Rostami, N. (2013) Investigation of Langmuir, Freundlich and Temkin Adsorption Isotherm of Tramadol by Multi-Wall Carbon Nanotube. Asian Journal of Chemistry, 25, 5467-5469. https://doi.org/10.14233/ajchem.2013.14786
Çelebi, O., üzüm, Ç., Shahwan, T. and Erten, H. (2007) A Radiotracer Study of the Adsorption Behavior of Aqueous Ba 2+ Ions on Nanoparticles of Zero-Valent Iron. Journal of Hazardous Materials, 148, 761-767. https://doi.org/10.1016/j.jhazmat.2007.06.122
Israel, U. and Eduok, U. (2004) Biosorption of Zinc from Aqueous Solution Using Coconut (Cocos nucifera L.) Coir Dust. Archives of Applied Science Research, 4, 809-819.
Ho, Y. (2006) Review of Second-Order Models for Adsorption Systems. Journals of Hazardous Materials, 136, 681-689. https://doi.org/10.1016/j.jhazmat.2005.12.043
Betiku, E. and Adepoju, T.F. (2013) Methanolysis Optimization of Beniseed (Sesamum indicum) Oil to Biodiesel and Fuel Quality Characterization. International Journal of Energy Environmental Engineering, 4, 1-9. https://doi.org/10.1186/2251-6832-4-9
Qiao, W., Yoon, S.H., Korai, Y., Mochida, I., Inoue, S.I., Sakurai, T. and Shimohara, T. (2004) Preparation of Activated Carbon Fibers from Polyvinyl Chloride. Carbon, 42, 1327-1331. https://doi.org/10.1016/j.carbon.2004.01.035
László, K., Bóta, A. and Nagy, L.G. (2000) Comparative Adsorption Study on Carbons from Polymer Precursors. Carbon, 38, 1965-1976. https://doi.org/10.1016/S0008-6223(00)00038-5
Adibfar, M., Kaghazchi, T., Asasian, N. and Soleimani, M. (2014) Conversion of Poly(ethylene terephthalate) Waste into Activated Carbon: Chemical Activation and Characterization. Chemical Engineering Technology, 37, 979-986. https://doi.org/10.1002/ceat.201200719
László, K., Bota, A. and Dekany, I. (2003) Effect of Heat Treatment on Synthetic Carbon Precursors. Carbon, 41, 1205-1214. https://doi.org/10.1016/S0008-6223(03)00048-4
Misra, A., Tyagi, P.K., Singh, M.K. and Misra, D.S. (2006) FTIR Studies of Nitrogen Doped Carbon Nanotubes. Diamond and Related Materials, 15, 385-388. https://doi.org/10.1016/j.diamond.2005.08.013
Attia, A.A., Rashwan, W.E. and Khedr, S.A. (2006) Capacity of Activated Carbon in the Removal of Acid Dyes Subsequent to Its Thermal Treatment. Dyes and Pigments, 69, 128-136. https://doi.org/10.1016/j.dyepig.2004.07.009
Ćurko, J., Matošić, M., Vlado Crnek, V., Višnja Stulić, V. and Ivan Mijatović, I. (2016) Adsorption Characteristics of Different Adsorbents and Iron(III) Salt for Removing As(V) from Water. Food Technology and Biotechnology, 54, 250-255. https://doi.org/10.17113/ftb.54.02.16.4064
Alabi-Babalola, O.D., Aransiola, E.F. and Shittu, T.D. (2019) A Study on the Optimization and Adsorption Capacity of Activated Carbon Produced from Polyvinyl Chloride (PVC) Wastes. Ife Journal of Technology, 26, 34-46. http://ijt.oauife.edu.ng/index.php/ijt/article/view/145