Effect of Cassava Starch and Sodium Carbonate on the Properties of Local Drilling Mud: Beneficiation to Improve the Rheological and Flow Properties of Locally Formulated Mud
- 1 Department of Chemical Engineering, Faculty of Engineering, University of Benin, Benin, Nigeria
- 2 Department of Chemical Engineering, Faculty of Engineering, University of Benin, Benin, Nigeria
- 3 Department of Chemical Engineering, Faculty of Engineering, University of Benin, Benin, Nigeria
Abstract
Drilling mud is a key component in drilling operations and in accessing oil and gas reservoirs. Bentonite is applied as a viscosifier, fluid loss control agent, and as a weighting material in water-based drilling mud. The type of bentonite used in drilling mud formulation is sodium bentonite due to its high dispersion properties and high swelling capacity. Nigeria has a huge bentonite clay deposit resources which can be evaluated and enhanced in order to be utilized as drilling mud. However, bentonite clay from different parts of Nigeria was investigated and found to be calcium bentonite which is not suitable for drilling mud, because it has low swelling capacity and poor rheological properties. In this study, local bentonite obtained from Afuze, Edo state was used to formulate different samples of drilling mud with each treated using thermo-chemical beneficiation process with sodium carbonate and cassava starch, and then undergo characterization to identify the changes in physical properties and finally, draw comparison with API values for standard drilling mud. The results obtained from this study indicates that, the flow and rheological properties of the beneficiated drilling mud developed through thermo-chemical treatment, showed significant improvement compared to the untreated mud. Therefore, pure calcium bentonite from natural deposits in Nigeria can be modified to sodium bentonite and sufficiently used in drilling mud formulation.
- Ademiluyi, F.T., Harry, T.F., Joel, O.F. and Oduola, K. (2016) Performance Evaluation of Local Cassava Starches with Imported Starch for Drilling Fluid. American Journal of Engineering Research (AJER), 5, 111-120.
- Afolabi, R.O., Efeovbokan, V. and Orodu, O. (2017) Properties and Application of Nigerian Bentonite Clay Deposits for Drilling Mud Formulation: Recent Advances and Future Prospects. Applied Clay Science, 143, 39-49. https://doi.org/10.1016/j.clay.2017.03.009
- Annis, R.M. and Smith, V.M. (1996) Drilling Fluids Technology. EXXON Company, Houston.
- Bourgoyne, A.T., Millheim, K.K., Chenevert, M.E. and Young, F.S. (1991) Applied Drilling Engineering. SPE Textbook Series Vol. 2. Society of Petroleum Engineers, Richardson.
- Dewu, B.B., Arabic, S.A., Oladipo, M.O., Funtua, I.I., Mohammed-Dabo, L.A. and Muhammad, A.M. (2011) Improvement of Rheological Properties of Bentonite Clays Using Sodium Carbonate and a Synthetic Viscosifier. International Archive of Applied Science & Technology, 2, 43-52.
- Offiong, A., Okorie, A. and Okon, A. (2016) Activation of Local Bentonite Clays for Use as Viscosifiers in Water-Based Drilling Fluids. Journal of Scientific Research and Reports, 12, 1-11. https://doi.org/10.9734/JSRR/2016/28719
- Falode, O.A., Ehinola, O.A. and Nebeife, P.C. (2007) Evaluation of Local Bentonite Clay as Oil Well Drilling Fluids in Nigeria. Applied Sciences, 39, 19-27. https://doi.org/10.1016/j.clay.2007.04.011
- Igbani, S., Peletiri, S.P. and Egba, S.U. (2015) A Study on the Individual Impact of Cassava Starch and Hydroxyl Propyl-Modified Starch on Mud Density. International Journal of Engineering Trends and Technology, 29, 1-5. https://doi.org/10.14445/22315381/IJETT-V29P201
- Chilingarian, G.V. and Vorabutr, P. (1983) Drilling and Drilling Fluids. Elsevier, Amsterdam, 149-151.
- Elward-Berry, J. and Darby, J.B. (1997) Rheologically Stable, Non-Toxic, High Temperature, Water Based Drilling Fluid. SPE Drilling & Completion, 12, 158-162. https://doi.org/10.2118/24589-PA
- Magzoub, M.I., Nasser, M.S., Hussein, I.A., Benamor, A., Onaizi, S.A., Slutan, A. and Mahmoud, E. (2017) Effects of Sodium Carbonate Addition, Heat and Agitation on Swelling Rheological Behaviour of Ca-Bentonite Colloidal Dispersion. Applied Clay Science, 147, 176-183. https://doi.org/10.1016/j.clay.2017.07.032
- Nwosu, D.C., Ejikeme, P.C.N. and Ejikeme, E.M. (2013) Physico-Chemical Characterization of “Ngwo” White Clay for Industrial Use. International Journal of Multidisciplinary Sciences and Engineering, 4, 11-14.