Chemical Treatment to Recover Molybdenum and Vanadium from Spent Heavy Gasoil Hydrodesulfurization Catalyst
- 1 Faculty of Engineering, Universidad Anáhuac México Norte, México City, México
- 2 Chemical Engineering Department of the Faculty of Chemistry, Universidad Nacional Autónoma de México (UNAM), Coyoacán, México
- 3 Chemical Engineering Department of the Faculty of Chemistry, Universidad Nacional Autónoma de México (UNAM), Coyoacán, México
- 4 Chemical Engineering Department of the Faculty of Chemistry, Universidad Nacional Autónoma de México (UNAM), Coyoacán, México
- 5 Chemical Engineering Department of the Faculty of Chemistry, Universidad Nacional Autónoma de México (UNAM), Coyoacán, México
Abstract
Large quantities of spent hydrodesulfurization (HDS) catalysts are available from petrochemical industry. Disposal of spent catalyst is a problem as it falls under the category of hazardous industrial waste due to its vanadium concentration. Most of these catalysts are usually supported on alumina containing a variable percentage of elements such as nickel or molybdenum. Hence these catalysts contain environmentally critical, and economically valuable metals such as molyb denum, vanadium, and, nickel. In this paper, a spent HDS catalyst was treated with caustic soda solution. Parameters such as temperature, time, and NaOH solution concentration have been studied thoroughly, in order to settle the appropriate conditions for the maximum recovery of molybdenum and vanadium. Under the best leaching conditions (20 %w NaOH, room temperature, 2 h) about 95% recovery of Mo and V was achieved, and the recovery of nickel obtained was of 99% in the form of NiAlO 4 .
- E. Furimsky, “Spent Refinery Catalysts: Environmental, Safety and Utilization,” Catalysis Today, Vol. 30, No. 4, 1996, pp. 223-286. doi:10.1016/0920-5861(96)00094-6
- A. G. Case and E. Wiewiorowski, “Ten Years of Catalyst Recycling: A Step to the Future,” 3rd International Symposium on Recycling of Metals and Engineered Materials, Point Clear, 12-15 November 1995, pp. 449-466.
- K. Inoue, H. Tsuyama, K. Yoshizuka and P. Zhang, “Extraction and Selective Stripping of Molybdenum(VI) and Vanadium(IV) from Sulfuric Acid Solution Containing Aluminum(III), Cobalt(II), Nickel(II) and Iron(III) by LIX 63 in Exxsol D80,” Hyrdometallurgy, Vol. 41, No. 1, 1996, pp. 45-53. doi:10.1016/0304-386X(95)00015-9
- C. L. Van Deelen, “Method for Extracting Metals from Catalyst on the Basis of Al2O3,” European Patent No. WO 95014, 1994.
- J. Mining and S. Toda, “Alkaline Roasting of Spent Catalyst Containing Molybdenum and Vanadium,” Journal of Mineral and Materials Processing Institute of Japan, Vol. 105, No. 3, 1989, pp. 261-264.
- R. K. Biswas, M. Taniguchi and M. Wakihara, “Recovery of Vanadium and Molybdenum from Heavy Oil Desulphurization Waste Catalyst,” Hydrometallurgy, Vol. 14, No. 2, 1985, pp. 219-230. doi:10.1016/0304-386X(85)90034-9
- R. W. Goerlich, R. C. Kunzelman, C. A. Vuitel and J. G. Welch, “Catalyst Disposal an Environmentally Sound Solution,” Symposium on Refinery Waste Cleanup, New Orleans, 10 August-4 September 1987, pp. 747-750.
- D. E. Hyatt, “Value Recovery from Spent Alumina-Base Catalyst,” US Patent No. 4657745, 1987.
- V. F. Bukhanevich and S. V. Radzikovskaya, “Vanadium Sesquisulfide and Its Properties,” Powder Metallurgy and Metal Ceramics, Vol. 6, No. 2, 1967, pp. 91-92. doi:10.1007/BF00775636
- M. Campo, J. Rams and A. Ure?a, “Determination by Nanoindentation of the Interfacial Mechanical Properties in Aluminum Matrix Composites Reinforced with Silica Coated Sic Particles,” Boletín de la Sociedad Espanola de Ceramica y Vidrio, Vol. 44, 2005, pp. 270-277.