Thermo-Hydrodynamics of Core-Annular Flow of Water, Heavy Oil and Air Using CFX
- 1 Department of Chemical Engineering, Center of Science and Technology, Federal University of Campina Grande
- 2
- 3
- 4
Abstract
The transport of heavy and ultra-viscous oil employing the core-flow technique has been increasing recently, because it provides a greater reduction of the pressure drop during the flow. In this context, the effect of temperature and the presence of gas on the thermo-hydrodynamics of a three-phase water-heavy oil-air flow in a horizontal pipe under the influence of gravity and drag forces, using the commercial software ANSYS CFX ? , hav e been evaluated. The standar d κ ? ε turbulence model, the mixture model for heavy oil-water system and the particle model for heavy oil-gas and water-gas systems, were adopted. Results of velocity, volume fraction, pressure and temperature fields of the phases present along the pipe are presented and discussed. It has been found that the presence of the air phase and the variation in the temperature affect the behavior of annular flow and pressure drop.
- K. C. O. Crivelaro, Y. T. Damacena, T. H. F. Andrade, A. G. B. de Lima and S. R. de Farias Neto, “Numerical Simulation of Heavy oil Flows in Pipes Using the Core-Annular Flow Technique,” WIT Transactions on Engineering Sciences, Computational Methods in Multiphase Flow V, Vol. 63, No. 5, 2009, pp. 193-203. http://dx.doi.org/10.2495/MPF090171
- R. M. O. Vara, A. C. Bannwart and C. H. M. Carvalho, “Production and Transportation of Heavy Oil by Water Injection,” 1st Brazilian Congress R & D in Petroleum and Gas—1st PDPETRO, UFRN-SQB Regional, Natal, 25-28 November 2001 (In Portuguese).
- F. E. Trevisan, “Flow Patterns and Pressure Drop in Three Phase Horizontal Flow of Heavy Oil, Water and Air,” Master’s Thesis, Petroleum Science and Engineering, Faculty of Mechanical Engineering, State University of Campinas (UNICAMP), Campinas, 2003 (In Portuguese).
- A. C. Bannwart, “Modeling Aspects of Oil-Water Core-Annular Flows,” Journal of Petroleum Science and Engineering, Vol. 32, No. 2-4, 2001, pp. 127-143. http://dx.doi.org/10.1016/S0920-4105(01)00155-3
- G. Ooms and P. Poesio, “Stationary Core-Annular Flow through a Horizontal Pipe,” Physical Review E, Vol. 68, No. 066301, 2003, pp. 1-7. http://dx.doi.org/10.1103/PhysRevE.68.066301
- A. Bensakhria, Y. Peysson and G. Antonini, “Experimental Study of the Pipeline Lubrication for Heavy Oil Transport,” Oil & Gas Science and Technology, Vol. 59, No 5, 2004, pp. 523-533. http://dx.doi.org/10.2516/ogst:2004037
- S. Ghosh, T. K. Mandal, G. Das and P. K. Das, “Review of Oil Water Core Annular Flow,” Renewable and Sustainable Energy Reviews, Vol. 13, No. 8, 2009, pp. 1957-1965. http://dx.doi.org/10.1016/j.rser.2008.09.034
- J. S. de S. Santos, “Numerical Study of Submerged Risers Lubrication to Transport of Heavy Oil,” Master’s Thesis, Chemical Engineering, Center of Science and Technology, Federal University of Campina Grande (UFCG), Campina Grande, 2009 (In Portuguese).
- T. H. F. Andrade, K. C. O. Crivelaro, S. R. de Farias Neto and A. G. B. de Lima, “Numerical Study of Heavy Oil Flow on Horizontal Pipe Lubricated by Water,” In: A. Ochsner, L. F. M. da Silva and H. Altenbach, Eds., Materials with Complex Behaviour II: Advanced Structured Materials, Springer-Verlag, Heidelberg, Berlin Heidelberg, Vol. 16, 2012, pp. 99-118. http://dx.doi.org/10.1007/978-3-642-22700-4_6
- A. C. Bannwart, O. M. H. Rodriguez, F. E. Trevisan, F. F. Vieira and C. H. M. de Carvalho, “Experimental Investigation on Liquid-Liquid-Gas Flow: Flow Patterns and Pressure-Gradient,” Journal of Petroleum Science and Engineering. Vol. 65, No. 1-2, 2009, pp. 1-13. http://dx.doi.org/10.1016/j.petrol.2008.12.014