Preparation of Nano-Modified Polyacrylamide and Its Application on Solid-Liquid Separation in Waste Drilling Mud
- 1
- 2
- 3
- 4
- 5
- 6
Abstract
To satisfy the requirement on solid-liquid separation in high-density waste drilling mud, prepare the nano-modified polyacrylamide(PAM) flocculant for high density waste drilling mud by in-situ dispersion method, direct dispersion method and simultaneous formation method. The result showed the flocculent effect of nano-modified polyacrylamide prepared by simultaneous formation method was the best. When the content of water glass and acrylamide(AM) were respectively 3% and 15% , reaction temperature was 60?C and reaction time was 3h, the performance of product was the best. The water content in filter cake was 24.32% after the waste drilling mud disposed by the optimization flocculant. The flocculent effect of optimization flocculant was superior to that of other flocculant in market.
- M. J. Yang, W. L. Liang, Q. R. Jin, et al., “Study on Comprehensive Treatment Technique about Waste Drilling Mud,” Journal of Mineralogy and Petrology, in Chinese, Vol. 23, 2003, pp. 109-112.
- M. Amanullah and L. Yu, “Environment Friendly Fluid Loss Additives to Protect the Marine Environment from the Detrimental Effect of Mud Additives,” Journal of Petroleum Science and Engineering, Vol. 48, No. 3-4, 2005, pp. 199-208. doi:10.1016/j.petrol.2005.06.013
- S. Rehan and H. Tahir, “A Fuzzy-Based Methodology for an Aggregative Environmental Risk Assessment: A Case Study of Drilling Waste,” Environmental Modelling & Soft- ware, Vol. 20, No. 1, 2005, pp. 33-46. doi:10.1016/j.envsoft.2003.12.007
- C. G. Street and S. E. Guigard, “Treatment of Oil-Based Drilling Waste Using Supercritical Carbon Dioxide,” Jour- nal of Canadian Petroleum Technology, Vol. 48, No. 6, 2009, pp. 26-29.
- J. A. Veil, “Drilling Waste Management,” Journal of Petroleum Technology, Vol. 54, 2002, pp. 50-52.
- M. P. Carignan, C. B. Lake and T. Menzies, “Assessment of Two Thermally Treated Drill Mud Wastes for Landfill Containment Applications,” Waste Management and Research, Vol. 25, No. 5, 2007, pp. 394-401. doi:10.1177/0734242X07073652
- J. G. Zhang, J. Nie and H. Deng, “An Experimental Study on the Treatment of Waste Drilling Fluid by Solid-Liquid Separation,” Environmental Protection of Oil & Gas Fields, in Chinese, Vol. 11, 2001, pp. 20-32.
- X. J. Guo and H. Ma, “Application and Study of High Density Drilling Fluid Technology,” Drilling Fluid and Completion Fluid, in Chinese, Vol. 26, 2009, pp. 8-10.