Electrochemical Investigation of Corrosion on AISI 316 Stainless Steel and AISI 1010 Carbon Steel: Study of the Behaviour of Imidazole and Benzimidazole as Corrosion Inhibitors — Oak Academic Publishing
Research ArticleOpen AccessGoogle Scholar indexed
Electrochemical Investigation of Corrosion on AISI 316 Stainless Steel and AISI 1010 Carbon Steel: Study of the Behaviour of Imidazole and Benzimidazole as Corrosion Inhibitors
Department of Chemistry, Federal University of Espirito Santo, Vitoria, Brazil
,
Department of Chemistry, Federal University of Espirito Santo, Vitoria, Brazil
,
Department of Chemistry, Federal University of Espirito Santo, Vitoria, Brazil
1 Department of Chemistry, Federal University of Espirito Santo, Vitoria, Brazil
2 Department of Chemistry, Federal University of Espirito Santo, Vitoria, Brazil
3 Department of Chemistry, Federal University of Espirito Santo, Vitoria, Brazil
An electrochemical investigation of the corrosion on AISI 316 austenitic stainless steel and AISI 1010 carbon steel in sodium chloride solution (3.0 wt.%) was performed in the absence and presence of imidazole and benzimidazole corrosion inhibitors. The results showed that at any inhibitor concentration (25 ppm to 1000 ppm), there was an increase in the polarisation resistance of both steels. The highest efficiency of corrosion inhibition was obtained using imidazole at a concentration of 50 ppm for both steels, with va lues of 96% for the AISI 316 stainless steel and 73% for the AISI 1010 carbon steel.
Groysman, A. and Brodsky, N. (2006) Corrosion and Quality. Accreditation and Quality Assurance, 10, 537-542. http://dx.doi.org/10.1007/s00769-005-0034-3
Almeida, M. (2005) Minimisation of Steel Atmospheric Corrosion: Updated Structure of Intervention. Progress in Organic Coatings, 54, 81-90. http://dx.doi.org/10.1016/j.porgcoat.2005.01.007
Hao, L., Zhang, S., Dong, J. and Ke, W. (2011) Atmospheric Corrosion Resistance of MnCuP Weathering Steel in Simulated Environments. Corrosion Science, 53, 4187-4192. http://dx.doi.org/10.1016/j.corsci.2011.08.028
Shifler, D.A. (2005) Understanding Material Interactions in Marine Environments to Promote Extended Structural Life. Corrosion Science, 47, 2335-2352. http://dx.doi.org/10.1016/j.corsci.2004.09.027
Kage, I., Matsui, K. and Kawabata, F. (2005) Minimum Maintenance Steel Plates and Their Application Technologies for Bridge-Life Cycle Cost Reduction Technologies with Environmental Safeguards for Preserving Social Infrastructure Assets. JFE Technical Report, 5, 31-37.
Tsutsumi, Y., Nishikata, A. and Tsuru, T. (2007) Pitting Corrosion Mechanism of Type 304 Stainless Steel under a Droplet of Chloride Solutions. Corrosion Science, 49, 1394-1407. http://dx.doi.org/10.1016/j.corsci.2006.08.016
Laycock, N.J. and Newman, R.C. (1997) Localised Dissolution Kinetics, Salt Films and Pitting Potentials. Corrosion Science, 39, 1771-1790. http://dx.doi.org/10.1016/S0010-938X(97)00049-8
Newman, R.C. (2001) Understanding the Corrosion of Stainless Steel. Corrosion, 57, 1030-1041. http://dx.doi.org/10.5006/1.3281676
Martini, E.M.A. and Muller, I.L. (2000) Characterization of the Film formed on Iron in Borate Solution by Electrochemical Impedance Spectroscopy. Corrosion Science, 42, 443-454. http://dx.doi.org/10.1016/S0010-938X(99)00064-5
Pistorius, P.C. and Burstein G.T. (1992) Metastable Pitting Corrosion of Stainless Steel and the Transition to Stability. Philosophical Transactions of the Royal Society A, 341, 531-559. http://dx.doi.org/10.1098/rsta.1992.0114
Kondo, Y. (1989) Prediction of Fatigue Crack Initiation Life Based on Pit Growth. Corrosion, 45, 7-11. http://dx.doi.org/10.5006/1.3577891
Turnbull, A., Mccartney, L.N. and Zhou, S. (2006) A Model to Predict the Evolution of Pitting Corrosion and the Pit-to-Crack Transition Incorporating Statistically Distributed Input Parameters. Corrosion Science, 48, 2084-2105. http://dx.doi.org/10.1016/j.corsci.2005.08.010
Baddoo, N.R. (2008) Stainless Steel in Construction: A Review of Research, Applications, Challenges and Opportunities. Journal of Constructional Steel Research, 64, 1199-1206. http://dx.doi.org/10.1016/j.jcsr.2008.07.011
Malik, A.U., Siddiqi, N., Ahmad, S. and Andijani, I.N. (1995) The Effect of Dominant Alloy Additions on the Corrosion Behaviour of Some Conventional and High Alloy Stainless Steels in Seawater. Corrosion Science, 37, 1521-1535. http://dx.doi.org/10.1016/0010-938X(95)00043-J
Lippold, J.C. and Kotecki, D.J. (2005) Welding Metallurgy of Stainless Steel. Wiley-Intercience, New Jersey.
Avci, R., Davis, B.H., Wolfenden, M.L., Beech, I.B., Lucas, K. and Paul, D. (2013) Mechanism of MnS-Mediated Pit Initiation and Propagation in Carbon Steel in an Anaerobic Sulfidogenic Media. Corrosion Science, 76, 267-274. http://dx.doi.org/10.1016/j.corsci.2013.06.049
Rangaraju, R.R., Raja, K.S., Panday, A. and Misra, M. (2010) Low-Cost Photoelectrocatalyst Based on a Nanoporous Oxide Layer of Low-Carbon Steel. Journal of Physics D: Applied Physics, 43, Article ID: 445301. http://dx.doi.org/10.1088/0022-3727/43/44/445301
Ormellese, M., Lazzari, L., Goidanich, S., Fumagalli, G. and Brenna, A. (2009) A Study of Organic Substances as Inhibitors for Chloride-Induced Corrosion in Concrete. Corrosion Science, 51, 2959-2968. http://dx.doi.org/10.1016/j.corsci.2009.08.018
Fekry, A.M. and Ameer, M.A. (2010) Corrosion Inhibition of Mild Steel in Acidic Media Using Newly Synthesized Heterocyclic Organic Molecules. International Journal of Hydrogen Energy, 35, 7641-7651. http://dx.doi.org/10.1016/j.ijhydene.2010.04.111
Lunarska, E. and Chernyayeva, O. (2006) Effect of Corrosion Inhibitors on Hydrogen Uptake by Al from NaOH Solution. International Journal of Hydrogen Energy, 31, 285-293. http://dx.doi.org/10.1016/j.ijhydene.2005.04.051
Zucchi, F., Trabanelli, G., Frignani, A. and Zucchini, M. (1978) The Inhibition of Stress Corrosion Cracking of Stainless Steels in Chloride Solutions. Corrosion Science, 18, 87-95. http://dx.doi.org/10.1016/S0010-938X(78)80078-X
Galal, A., Atta, N.F. and Al-Hassan, M.H.S. (2005) Effect of Some Thiophene Derivatives on the Electrochemical Behaviour of AISI 316 Austenitic Stainless Steel in Acidic Solutions Containing Chloride Ions I. Molecular Structure and Inhibition Efficiency Relationship. Materials Chemistry and Physics, 89, 38-48. http://dx.doi.org/10.1016/j.matchemphys.2004.08.019
Goudarzi, N. and Farahani, H. (2014) Investigation on 2-Mercaptobenzothiazole Behaviour as Corrosion Inhibitor for 316-Stainless Steel in Acidic Media. Anti-Corrosion Methods and Materials, 61, 20-26. http://dx.doi.org/10.1108/ACMM-11-2012-1223
Granero, M.F.L., Matai, P.H.L.S., Aoki, I.V. and Guedes, I.C. (2009) Dodigen 213-N as Corrosion Inhibitor for ASTM 1010 Mild Steel in 10% HCl. Journal of Applied Electrochemistry, 39, 1199-1205. http://dx.doi.org/10.1007/s10800-009-9785-6
Duda, Y., Govea-Rueda, R., Galicia, M., Beltrán, H.I. and Zamudio-Rivera, L.S. (2005) Corrosion Inhibitors: Design, Performance and Computer Simulations. The Journal of Physical Chemistry B, 109, 22674-22684. http://dx.doi.org/10.1021/jp0522765
Kuznetsov, Y.I. and Kazansky, L.P. (2008) Physicochemical Aspects of Metal Protection by Azoles as Corrosion Inhibitors. Russian Chemical Reviews, 77, 219-232. http://dx.doi.org/10.1070/RC2008v077n03ABEH003753
Khaled, K.F. (2003) The Inhibition of Benzimidazole Derivatives on Corrosion of Iron in 1M HCl Solutions. Electrochimica Acta, 48, 2493-2503. http://dx.doi.org/10.1016/S0013-4686(03)00291-3
Wang, L. (2001) Evaluation of 2-Mercaptobenzimidazole as Corrosion Inhibitor for Mild Steel in Phosphoric Acid. Corrosion Science, 43, 2281-2289. http://dx.doi.org/10.1016/S0010-938X(01)00036-1
Popova, A., Christov, M. and Deligeorgiev, T. (2003) Influence of the Molecular Structure on the Inhibitor Properties of Benzimidazole Derivatives on Mild Steel Corrosion in 1 M Hydrochloric Acid. Corrosion, 59, 756-764. http://dx.doi.org/10.5006/1.3277604
Aljourani, J., Raeissi, K. and Golozar, M.A. (2009) Benzimidazole and Its Derivatives as Corrosion Inhibitors for Mild Steel in 1M HCl Solution. Corrosion Science, 51, 1836-1843. http://dx.doi.org/10.1016/j.corsci.2009.05.011
Zhang, Z., Chen, S., Li, Y., Li, S. and Wanga, L. (2009) A Study of the Inhibition of Iron Corrosion by Imidazole and Its Derivatives Self-Assembled Films. Corrosion Science, 51, 291-300. http://dx.doi.org/10.1016/j.corsci.2008.10.040
Curkovic, H.O., Stupnisek-lisac, E. and Takenouti, H. (2010) The Influence of pH Value on the Efficiency of Imidazole Based Corrosion Inhibitors of Copper. Corrosion Science, 52, 398-405. http://dx.doi.org/10.1016/j.corsci.2009.09.026
Zhang, D.Q., Gao, L.X. and Zhou, G.D. (2004) Inhibition of Copper Corrosion in Aerated Hydrochloric Acid Solution by Heterocyclic Compounds Containing a Mercapto Group. Corrosion Science, 46, 3031-3040. http://dx.doi.org/10.1016/j.corsci.2004.04.012
Popova, A., Sokolova, E., Raicheva, S. and Christov, M. (2003) AC and DC Study of the Temperature Effect on Mild Steel Corrosion in Acid Media in the Presence of Benzimidazole Derivatives. Corrosion Science, 45, 33-58. http://dx.doi.org/10.1016/S0010-938X(02)00072-0
Kokalj, A. (2013) Formation and Structure of Inhibitive Molecular Film of Imidazole on Iron Surface. Corrosion Science, 68, 195-203. http://dx.doi.org/10.1016/j.corsci.2012.11.015
Mendes, J.O., Silva, E.C. and Rocha, A.B. (2012) On the Nature of Inhibition Performance of Imidazole on Iron Surface. Corrosion Science, 57, 254-259. http://dx.doi.org/10.1016/j.corsci.2011.12.011
Mousavi, M., Mohammadalizadeh, M. and Khosravan, A. (2011) Theoretical Investigation of Corrosion Inhibition Effect of Imidazole and Its Derivatives on Mild Steel Using Cluster Model. Corrosion Science, 53, 3086-3091. http://dx.doi.org/10.1016/j.corsci.2011.05.034
ASM International Handbook Committee (1990) Volume 1: Properties and Selection: Irons, Steels and High-Performance Alloys. ASM International, Ohio, 150.
Li, Y., Hu, R.G., Wang, J.R., Huang, Y.X. and Lin, C.-J. (2009) Corrosion Initiation of Stainless Steel in HCl Solution Studied Using Electrochemical Noise and in Situ Atomic Force Microscope. Electrochimica Acta, 54, 7134-7140. http://dx.doi.org/10.1016/j.electacta.2009.07.042
Gammer, K., Rosner, M., Poeckl, G. and Hutter, H. (2003) AES and SIMS Analysis of Non-Metallic Inclusions in a Low-Carbon Chromium-Steel. Analytical and Bioanalytical Chemistry, 376, 255-259. http://dx.doi.org/10.1007/s00216-003-1851-z
Yang, Y.Z., Jiang, Y.M. and Li, J. (2013) In Situ Investigation of Crevice Corrosion on UNS S32101 Duplex Stainless Steel in Sodium Chloride Solution. Corrosion Science, 76, 163-169. http://dx.doi.org/10.1016/j.corsci.2013.06.039
Tang, Y., Zhang, F., Hu, S., Cao, Z., Wu, Z. and Jing, W. (2013) Novel Benzimidazole Derivatives as Corrosion Inhibitors of Mild Steel in the Acidic Media. Part I: Gravimetric, Electrochemical, SEM and XPS studies. Corrosion Science, 74, 271-282. http://dx.doi.org/10.1016/j.corsci.2013.04.053
Khaled, K.F. and Amin, M.A. (2009) Corrosion Monitoring of Mild Steel in Sulphuric Acid Solutions in Presence of Some Triazole Derivatives—Molecular Dynamics, Chemical and Electrochemical Studies. Corrosion Science, 51, 1964-1975. http://dx.doi.org/10.1016/j.corsci.2009.05.023
Negma, N.A., Kandile, N.G., Badr, E.A. and Mohammed, M.A. (2012) Gravimetric and Electrochemical Evaluation of Environmentally Friendly Nonionic Corrosion Inhibitors for Carbon Steel in 1 M HCl. Corrosion Science, 65, 94-103. http://dx.doi.org/10.1016/j.corsci.2012.08.002
He, X., Jiang, Y., Li, C., Wang, W., Hou, B. and Wu, L. (2014) Inhibition Properties and Adsorption Behaviour of Imidazole and 2-Phenyl-2-Imidazoline on AA5052 in 1.0 M HCl Solution. Corrosion Science, 83, 124-136. http://dx.doi.org/10.1016/j.corsci.2014.02.004