In this paper we demonstrate that the residual stress introduced by several different surface finishes affects the critical current density for passivation and the passive current density in the anodic polarization curve of austenitic stainless steel and that those critical current densities can be reduced by controlling the residual stress by applying a cavitating jet to the backs of specimens. The results show that the current density either increased or decreased depending on the surface finish, and that was decreased by introducing compressive residual stress for all surface finishes.
Boven, G.V., Chen, W. and Rogge, R. (2006) The Role of Residual Stress in Neutral pH Stress Corrosion Cracking of Pipeline Steels. Part I: Pitting and Cracking Occurrence. Acta Materialia, 55, 29-42.
Mochizuki, M. (2007) Control of Welding Residual Stress for Ensuring Integrity against Fatigue and Stress-Corrosion Cracking. Nuclear Engineering and Design, 237, 107-123. http://dx.doi.org/10.1016/j.nucengdes.2006.05.006
Soyama, H., Saito, K. and Saka, M. (2002) Improvement of Fatigue Strength of Aluminum Alloy by Cavitation Shot-Less Peening. Journal of Engineering Materials and Technology, Transactions of the ASME, 124, 135-139. http://dx.doi.org/10.1115/1.1447926
Soyama, H., Shimizu, M., Hattori, Y. and Nagasawa, Y. (2008) Improving the Fatigue Strength of the Elements of a Steel Belt for CVT by Cavitation Shotless Peening. Journal of Materials Science, 43, 5028-5030. http://dx.doi.org/10.1007/s10853-008-2743-6
Kobayashi, M., Matsui, T. and Murakami, Y. (1998) Mechanism of Creation of Compressive Residual Stress by Shot Peening. International Journal of Fatigue, 20, 351-357. http://dx.doi.org/10.1016/S0142-1123(98)00002-4
Soyama, H., Kikuchi, T., Nishikawa, M. and Takakuwa, O. (2010) Introduction of Compressive Residual Stress into Stainless Steel by Employing a Cavitating Jet in Air. Surface and Coatings Technology, 205, 3167-3174. http://dx.doi.org/10.1016/j.surfcoat.2010.11.031
Sano, Y., Akita, K., Masaki, K., Ochi, Y., Altenberger, I. and Scholtes, B. (2006) Laser Peening without Coating as a Surface Enhancement Technology. Journal of Laser Micro/Nanoengineering, 1, 161-166. http://dx.doi.org/10.2961/jlmn.2006.03.0002
Sedriks, A.J. (1996) Corrosion of Stainless Steels. 2nd Edition, Wiley-Interscience, New York.
Begujm, Z., Poonguzhali, A., Basu, R., Sudha, C., Shaikh, H., Rao, R.V.S., Patil, A. and Dayal, R.K. (2011) Studies of the Tensile and Corrosion Fatigue Behaviour of Austenitic Stainless Steels. Corrosion Science, 53, 1424-1432. http://dx.doi.org/10.1016/j.corsci.2011.01.003
Davoodi, A., Pakshir, M., Babaiee, M. and Ebrahimi, G.R., (2011) A Comparative H2S Corrosion Study of 304L and 316L Stainless Steels in Acidic Media. Corrosion Science, 53, 399-408. http://dx.doi.org/10.1016/j.corsci.2010.09.050
Vignal, V., Zhang, H., Delrue, O., Heintz, O., Popa, I. and Peultier, J. (2011) Influence of Long-Term Ageing in Solution Containing Chloride. Corrosion Science, 53, 894-903. http://dx.doi.org/10.1016/j.corsci.2010.11.011
Garcia, C., Tiedra, M.P., Blanco, Y., Martin, O. and Martin, F. (2008) Intergranular Corrosion of Welded Joints of Austenitic Stainless Steels Studied by Using an Electrochemical Minicell. Corrosion Science, 50, 2390-2397. http://dx.doi.org/10.1016/j.corsci.2008.06.016
Peyre, P., Scherpereel, X., Berthe, L., Carboni, C., Fabbro, R., Beranger, G. and Lemaitre, C. (2000) Surface Modifications Induced in 316L Steel by Laser Peening and Shot Peening. Influence on Pitting Corrosion Resistance. Materials Science and Engineering A, 280, 294-302. http://dx.doi.org/10.1016/S0921-5093(99)00698-X
Lee, H., Kim, D., Jung, J., Pyoun, Y. and Shin, K. (2009) Influence of Peening on the Corrosion Properties of AISI 304 Stainless Steel. Corrosion Science, 51, 2826-2830. http://dx.doi.org/10.1016/j.corsci.2009.08.008
Azer, V., Hashemi, B. and Yazdi, M.R. (2010) The Effect of Shot Peening on Fatigue and Corrosion Behaviour of 316L Stainless Steel in Ringer’s Solution. Surface and Coatings Technology, 204, 3546-3551. http://dx.doi.org/10.1016/j.surfcoat.2010.04.015
Bahadur, A., Kumar, B.R. and Chowdhury, S.G. (2004) Evaluation of Changes in X-Ray Elastic Constants and Residual Stress as a Function of Cold Rolling of Austenitic Steels. Materials Science and Technology, 20, 387-392. http://dx.doi.org/10.1179/026708304225012170
Kumar, B.R., Mahato, B. and Singh, R., Kumar, B.R., Mahato, B. and Singh, R. (2007) Influence of Cold-Worked Structure on Electrochemical Properties of Austenitic Stainless Steels. Metallurgical and Materials Transactions A, 38, 2085-2094. http://dx.doi.org/10.1007/s11661-007-9224-4
Peguet, L., Malki, B. and Baroux, B. (2009) Effect of Austenite Stability on the Pitting Corrosion Resistance of Cold Worked Stainless Steels. Corrosion Science, 51, 493-498. http://dx.doi.org/10.1016/j.corsci.2008.12.026
Ghanem, F., Braham, C., Fitzpatrick, M.E. and Sidhom, H. (2002) Effect of Near-Surface Residual Stress and Micro-Structure Modification from Machining on the Fatigue Endurance of a Tool Steel. Journal of Materials Engineering and Performance, 11, 631-639. http://dx.doi.org/10.1361/105994902770343629
Turnbull, A., Mingard, K., Lord, J.D., Roebuck, B., Tice, D.R., Mottershead, K.J., Fairweather, N.D. and Bradbury, A.K. (2011) Sensitivity of Stress Corrosion Cracking of Stainless Steel to Surface Machining and Grinding Procedure. Corrosion Science, 53, 3398-3415. http://dx.doi.org/10.1016/j.corsci.2011.06.020
Takakuwa, O., Kawaragi, Y. and Soyama, H. (2013) Estimation of the Yield Stress of Stainless Steel from the Vickers Hardness Taking Account of the Residual Stress. Journal of Surface Engineered Materials and Advanced Technology, 3, 262-268. http://dx.doi.org/10.4236/jsemat.2013.34035
Soyama, H. (2011) Enhancing the Aggressive Intensity of a Cavitating Jet by Means of the Nozzle Outlet Geometry. Journal of Fluids Engineering, Transactions of the ASME, 133, Article ID: 101301.
Outeiro, J.C., Pina, J.C., Saoubi, R.M., Pusavec, F. and Jawahir, I.S. (2006) Analysis of Residual Stresses Induced by Dry Turning of Difficult-to-Machine Materials. International Journal of Machine Tools and Manufacture, 46, 1786-1794. http://dx.doi.org/10.1016/j.ijmachtools.2005.11.013
Lazoglu, I., Ulutan, D., Alaca, B.E., Engin, S. and Kaftanoglu, B. (2008) An Enhanced Analytical Model for Residual Stress Prediction in Machining. Manufacturing Technology, 57, 81-84.
Ungar, T. and Borbely, A. (1996) The Effect of Dislocation Contrast on X-Ray Line Broadening: A New Approach to Line Profile Analysis. Applied Physics Letters, 69, 3173-3175. http://dx.doi.org/10.1063/1.117951
Barabash, R. (2001) X-Ray and Neutron Scattering by Different Dislocation Ensembles. Materials Science and Engineering A, 309-310, 49-54. http://dx.doi.org/10.1016/S0921-5093(00)01663-4
Wang, Y., Zhao, W., Ai, H., Zhou, X. and Zhang, T. (2011) Effects of Strain on the Corrosion Behaviour of X80 Steel. Corrosion Science, 53, 2761-2766. http://dx.doi.org/10.1016/j.corsci.2011.05.011
Wang, X.Y. and Li, D.Y. (2002) Mechanical and Electrochemical Behavior of Nanocrystalline Surface of 304 Stainless Steel. Electrochimica Acta, 47, 3939-3947. http://dx.doi.org/10.1016/S0013-4686(02)00365-1
Liu, X. and Frankel, G.S. (2006) Effects of Compressive Stress on Localized Corrosion in AA2024-T3. Corrosion Science, 48, 3309-3329. http://dx.doi.org/10.1016/j.corsci.2005.12.003