Optimal Control for Smokescreen Release Based on Numerical Simulation: Challenges and Theoretical Framework
- 1 Institute of Chemical Defense, Beijing, China
- 2 Institute of Chemical Defense, Beijing, China
- 3 Institute of Chemical Defense, Beijing, China
- 4 Institute of Chemical Defense, Beijing, China
- 5 Institute of Chemical Defense, Beijing, China
- 6 Institute of Chemical Defense, Beijing, China
Abstract
This paper analyses the key issues and challenges of the smokescreen release optimal control under complex terrains and meteorological conditions, and proposes a dynamic model based theoretical framework that integrates the smoke release equipments, the release time, the release positions, different ways to release smoke and launch attacks, various terrains and meteorological conditions and other factors so as to determine the appropriate smokescreen release plans through the rapid inverse for various threats and battlefield environments and to conduct realtime simulation and evaluation. This paper provides a theoretical basis for the smokescreen release optimal control.
- Chen, H.P. (2002) Smokescreen Technical Basis. Ordnance Industry Press, Beijing.
- Searcy, C., Dean, K. and Stringer, W. (1998) PUFF: A Lagrangian Trajectory Volcanic Ash Tracking Model. Journal of Volcanology and Geothermal Research, 80, 1-16.
- Huang, S.X., Liu, P., Chen, H.P., et al. (2010) Numerical Simulation and Experimental Comparison on Atmospheric Pollution Chemical Accident Hazard Predicting (CDM). Acta Scientiarum Naturalium Universitatis Pekinensis, 47, 35- 38.
- Bartzis, J., Varvayanni, M., Venetsanos, A., et al. (1999) ADREA-Prog: A Three-Dimensional Finite Volumes. Mesoscale Meteorological Prognostic Model. Report RODOS (WG2)-TN (99)-02.
- Yao, R.T., Hao, H.W., Huang, J., et al. (2006) A Real-Time System TW-NAOCAS of Accident Consequence Assessment for Tianwan NPP. Radiation Protection Bulletin, 26, 1-9.
- Information on http://www.acronymfinder.com/Science-and-Medicine/CBNP.html
- Sullivan, T.J., Ellis, J.S., Foster, C.S., et al. (1993) Atmospheric Release Advisory Capability: Real-Time Modeling of Airborne Hazardous Materials. Bulletin of the American Meteorological Society, 74, 2343-2361.
- Imai, K., Chino, M., Ishikawa, H., et al. (1985) SPEEDI: A Computer Code System for the Real-Time Prediction of Radiation Dose to the Public Due to an Accidental Release. JAERI, 1297, 89.
- Huang, S.X., Liu, F., Li, H.M. and Zuo, Y. (2010) Numerical Study on the Chemical Hazard Aiming at the Security during 2008 Beijing Olympic Games. 2010 Second World Congress on Software Engineering (WCSE), Wuhan, 19-20 December 2010, 94-97.
- Huang, S.X., Wang, X.M., Fu, T.B., et al. (2011) An Integrated Approach on Predicting, Warning and Optimized Controlling System Based on GIS for Nuclear Accident Hazard. The 2011 International Conference on Computers, Communications, Control and Automation (CCCA 2011), IEEE, Hong Kong, 301-305.
- Huang, S.X., Yang, W.D., Zhou, J.Y., et al. (in press) Hazard Assessment for Japanese Abandoned Chemical Weapons Destruction Based on Local-scale Atmospheric Dispersion Simulation. Applied Mechanics and Materials.
- Winiarek, V., Bocquet, M., Duhanyan, N., et al. (2014) Estimation of the Caesium-137 Source Term from the Fukushima Daiichi Nuclear Power Plant Using a Consistent Joint Assimilation of Air Concentration and Deposition Observations. Atmospheric Environment, 82, 268-279.
- Stohl, A., Seibert, P., Arduini, J., et al. (2009) An Analytical Inversion Method for Determining Regional and Global Emissions of Greenhouse Gases: Sensitivity Studies and Application to Halocarbons. Atmospheric Chemistry and Physics, 9, 1597-1620.