Composite Mesh Electrodes with Immobilized Bacteria for Bio-Batteries
- 1 Department of Chemical and Biological Engineering, University of Saskatchewan, Saskatoon, Canada
- 2 Department of Chemical and Biological Engineering, University of Saskatchewan, Saskatoon, Canada
- 3 Department of Chemical and Biological Engineering, University of Saskatchewan, Saskatoon, Canada
Abstract
An anode was constructed using a novel technique and subsequently tested in a bio-battery. The anode comprised of a composite electrode coated with immobilized bacteria. The immobilized bacteria used in this study were Escherichia coli K-12. The composite electrode contained three layers: a 304 L stainless steel mesh base, an electro-polymerized layer of pyrrole, and an electro-polymerized layer of methylene blue. The bacteria were immobilized utilizing a technique incorporating a carbon nanoparticle and Teflon TM emulsion. The composite electrode combined with immobilized bacteria was examined whilst incorporated into the anodic chamber of a bio-battery. Different tests were conducted, including Electrochemical Impedance Spectroscopy. Results from these tests were compared with data obtained from alternate configurations and values from the open literature. The maximum power density generated by the composite electrode with immobilized bacteria whilst incorporated into the anodic chamber of a bio-battery was 378 mW/m 2 . Results demonstrate this composite anode configuration with immobilized bacteria produced approximately 69% more power density and 53% more current density than alternate electrode configurations with bacteria suspended in solution. Also, it was found that a significant portion of the bio-battery’s resistance to charge transfer occurred at the surface of the anode and this resistance was lowered by 51% through bacteria immobilization.
- Rabaey, K. and Verstraete, W. (2005) Microbial Fuel Cells: Novel Biotechnology for Energy Generation. Trends in Biotechnology, 23, 291-298. http://dx.doi.org/10.1016/j.tibtech.2005.04.008
- Logan, B.E., Hamelers, B., Rozendal, R., Schröder, U., Keller, J., Freguia, S., Aelterman, P., Verstraete, W. and Rabaey, K. (2006) Microbial Fuel Cells: Methodology and Technology. Environmental Science & Technology, 40, 5181-5192. http://dx.doi.org/10.1021/es0605016
- Yuan, Y., Jeon, Y., Ahmed, J., Park, W. and Kim, S. (2009) Use of Carbon Nanoparticles for Bacteria Immobilization in Microbial Fuel Cells for High Power Output. Journal of the Electrochemical Society, 156, B1238-B1241. http://dx.doi.org/10.1149/1.3190477
- Kim, J.H., Park, W. and Kim, S. (2011) Immobilized Polyviologen as an Effective Redox Mediator for Microbial Fuel Cells. Bulletin of the Korean Chemical Society, 32, 3849-3850. http://dx.doi.org/10.5012/bkcs.2011.32.11.3849
- Prieto-Simón, B. and Fàbregas, E. (2004) Comparative Study of Electron Mediators Used in the Electrochemical Oxidation of Nadh. Biosensors and Bioelectronics, 19, 1131-1138. http://dx.doi.org/10.1016/j.bios.2003.10.010
- Qiao, Y., Li, C.M., Bao, S.-J. and Bao, Q.-L. (2007) Carbon Nanotube/Polyaniline Composite as Anode Material for Microbial Fuel Cells. Journal of Power Sources, 170, 79-84. http://dx.doi.org/10.1016/j.jpowsour.2007.03.048
- Xi, M.-Y. and Sun, Y.-P. (2008) Preliminary Study on E. coli Microbial Fuel Cell and On-Electrode Taming of the Biocatalyst. The Chinese Journal of Process Engineering, 8.
- Aelterman, P., Versichele, M., Marzorati, M., Boon, N. and Verstraete, W. (2008) Loading Rate and External Resistance Control the Electricity Generation of Microbial Fuel Cells with Different Three-Dimensional Anodes. Bioresource Technology, 99, 8895-8902. http://dx.doi.org/10.1016/j.biortech.2008.04.061
- Wang, X., Cheng, S., Feng, Y., Merrill, M.D., Saito, T. and Logan, B.E. (2009) Use of Carbon Mesh Anodes and the Effect of Different Pretreatment Methods on Power Production in Microbial Fuel Cells. Environmental Science & Technology, 43, 6870-6874. http://dx.doi.org/10.1021/es900997w
- Park, D.H. and Zeikus, J.G. (2003) Improved Fuel Cell and Electrode Designs for Producing Electricity from Microbial Degradation. Biotechnology and Bioengineering, 81, 348-355. http://dx.doi.org/10.1002/bit.10501
- Davila, D., Esquivel, J., Vigues, N., Sanchez, O., Garrido, L., Tomas, N., Sabate, N., Del Campo, F., Munoz, F. and Mas, J. (2008) Development and Optimization of Microbial Fuel Cells. Journal of New Materials for Electrochemical Systems, 11, 99.