Leaching of Lead, Chromium and Copper into Drinks Placed in Plastic Cups at Different Conditions
- 1 Department of Chemistry, Faculty of Science, Mbarara University of Science and Technology, Mbarara, Uganda
- 2 Department of Chemistry, Faculty of Science, Mbarara University of Science and Technology, Mbarara, Uganda
- 3 Department of Chemistry, Faculty of Science, Mbarara University of Science and Technology, Mbarara, Uganda
- 4 Department of Chemistry and Biochemistry, School of Sciences and Aerospace Studies, Moi University, Eldoret, Kenya
- 5 Department of Chemistry, Faculty of Science, Mbarara University of Science and Technology, Mbarara, Uganda
- 6 Africa Center of Excellence II in Phytochemicals, Textile and Renewable Energy (ACE II PTRE), Moi University, Eldoret, Kenya
Abstract
Plastic cups commonly used by communities of Uganda lose color with time as they are used. The purpose of this study was to determine the concentrations of copper, lead and chromium in drinks placed in blue and green plastic cups from two companies (anonymized as A and B) in Uganda. New blue and green polyethylene plastic cups produced from unrecycled material were purchased from company A and company B while control cups of Luminarc white (Saudi Arabia) and porcelain white glazed (China) were purchased from shops in Mbarara city. The ash from the burnt blue and green plastic cups was digested using Aqua Regia . After a holding time of 30 and 60 minutes, milk and tea samples in the four different cups were also digested using Aqua Regia . Sample analysis for the supernatants was done in triplicates using an atomic absorption spectrophotometer. The ash of blue and green cups from company A was found to contain the highest concentration of heavy metals which ranged from 0.73 to 1.86 ppm for lead, 8.05 to 38.32 ppm of copper, and 655.80 to 756.57 ppm for chromium. For company B, the heavy metal concentrations ranged from 0.76 to 1.43 ppm, 5.51 to 22.85 ppm, and 756.67 to 815.25 ppm, respectively. The concentration of the leached metals ranged from 0.001 to 5.75 ppm for copper, 0.001 to 0.60 ppm for chromium, and 0.001 to 0.41 ppm for lead for the cup of company A. For the cup from company B, the concentration ranges for the leached metals were from 0.001 to 3.59 ppm, 0.001 to 1.08 ppm, and 0.001 to 0.29 ppm, respectively. Most of the values obtained for the leached concentrations of the metals studied were above the respective drinking water in WHO and USEPA permissible limits of 1 ppm (copper), 0.05 ppm (lead) and 0.1 ppm (chromium). The blue and green plastic cups from both companies had leached concentrations of copper, lead and chromium below the permissible limits at 25°C, pH 6.2 (milk) and a holding time of 30 minutes. The control cups did not leach detectable amounts of copper, chromium and lead under the study conditions, hence it may be safe for holding the hot drinks at the temperatures experimented in this study.
- Statista (2021) Annual Production of Plastics Worldwide from 1950 to 2020. https://www.statista.com/statistics/282732/global-production-of-plastics-since-1950
- Cheng, X., Shi, H., Adams, C.D. and Ma, Y. (2010) Assessment of Metal Contaminations Leaching Out from Recycling Plastic Bottles upon Treatments. Environmental Science and Pollution Research, 17, 1323-1330. https://doi.org/10.1007/s11356-010-0312-4
- Turner, A. and Filella, M. (2021) Hazardous Metal Additives in Plastics and Their Environmental Impacts. Environment International, 156, Article ID: 106622. https://doi.org/10.1016/j.envint.2021.106622
- Ranta-Korpi, M., Vainikka, P., Konttinen, J., Saarimaa, A. and Rodriguez, M. (2014) Ash Forming Elements in Plastics and Rubbers. VTT Technical Research Centre of Finland, Espoo.
- Rochman, C.M. (2015) The Complex Mixture, Fate and Toxicity of Chemicals Associated with Plastic Debris in the Marine Environment. In: Bergmann, M., Gutow, L. and Klages, M., Eds., Marine Anthropogenic Litter, Springer, Cham, 117-140. https://doi.org/10.1007/978-3-319-16510-3_5
- Dizaj, S.M., Lotfipour, F., Barzegar-Jalali, M., Zarrintan, M.H. and Adibkia, K. (2014) Antimicrobial Activity of the Metals and Metal Oxide Nanoparticles. Materials Science and Engineering: C, 44, 278-284. https://doi.org/10.1016/j.msec.2014.08.031
- Janssen, M.P.M., Spijker, J., Lijzen, J.P.A. and Wesselink, L.G. (2016) Plastics That Contain Hazardous Substances: Recycle or Incinerate? Dutch National Institute for Public Health and the Environment, RIVM, Bilthoven.
- Alam, O., Yang, L. and Yanchun, X. (2019) Determination of the Selected Heavy Metal and Metalloid Contents in Various Types of Plastic Bags. Journal of Environmental Health Science and Engineering, 17, 161-170. https://doi.org/10.1007/s40201-019-00337-2
- Qiao, F., Lei, K., Li, Z., Liu, Q., Wei, Z., An, L., Qi, H. and Cui, S. (2017) Effects of Storage Temperature and Time of Antimony Release from PET Bottles into Drinking Water in China. Environmental Science and Pollution Research, 25, 1388-1393. https://doi.org/10.1007/s11356-017-0598-6
- Muniz, L.P., Santos, L.M.G.D., Couto, K.L.M.D. and Jacob, S.D.C. (2018) Evaluation of Metals in Tomato Sauces Stored in Different Types of Packaging. Food Science and Technology, 38, 383-389. https://doi.org/10.1590/fst.27916
- Engwa, G.A., Ferdinand, F.U., Nwalo, F.N. and Unachukwu, M.N. (2019) Mechanism and Health Effects of Heavy Metal Toxicity in Humans. In: Karcioglu, O. and Arslan, B., Eds., Poisoning in the Modern World—New Tricks for an Old Dog? Intech-Open, London, 1-23.