Use of Thermogravimetric Analysis for Moisture Determination in Difficult Lyophilized Biological Samples
- 1 Standardization Science, National Institute for Biological Standards & Control (NIBSC), Hertfordshire, UK
- 2 Standardization Science, National Institute for Biological Standards & Control (NIBSC), Hertfordshire, UK
- 3 Standardization Science, National Institute for Biological Standards & Control (NIBSC), Hertfordshire, UK
- 4 Standardization Science, National Institute for Biological Standards & Control (NIBSC), Hertfordshire, UK
- 5 Biotherapeutics Division, National Institute for Biological Standards & Control (NIBSC), Hertfordshire, UK
- 6 Biotherapeutics Division, National Institute for Biological Standards & Control (NIBSC), Hertfordshire, UK
- 7 Bacteriology Division, National Institute for Biological Standards & Control (NIBSC), Hertfordshire, UK
Abstract
Residual moisture is a key quality control parameter for lyophilized biologicals, as high moisture can correlate with poor stability. Coulometric Karl Fischer titration is the most widely used technology to determine residual water content; some chemicals are known to cause problems with Karl Fischer titration, but these chemicals do not usually occur in biologics. Three biological samples, of fibrinogen, heparin and Haemophilus influenza b polysaccharide, have caused particular issue in our hands by routine Karl Fischer analysis, illustrating different limitations with this method. The use of thermogravimetric analysis, with evolved gas mass spectrometric monitoring, is described here as a successful alternative for moisture analysis in these materials.
- Manning, M.C., Chou, D.K., Murphy, B.M., Payne, R.W. and Katayama, D.S. (2010) Stability of Protein Pharmaceuticals: An Update. Pharmaceutical Research, 27, 544-575. http://dx.doi.org/10.1007/s11095-009-0045-6
- Towns, J.K. (1995) Moisture Content in Proteins: Its Effects and Measurement. Journal of Chromatography A, 705, 115-127. http://dx.doi.org/10.1016/0021-9673(94)01257-F
- Breen, E.D., Curley, J.G., Overcashier, D.E., Hsu, C.C. and Shire, S.J. (2001) Effect of Moisture and Stability a Lyophilized Humanized Monoclonal Antibody Formulation. Pharmaceutical Research, 18, 1345-1353. http://dx.doi.org/10.1023/A:1013054431517
- European Pharmacopoeia 8.0 (2014) Chapter 2.5.32 Water: Micro Determination.
- Scholz, E. (1984) Karl Fischer Titration. Springer Verlag, Berlin.
- May, J.C. (2010) Regulatory Control of Freeze-Dried Products: Importance and Evaluation of Residual Moisture. In: Rey, L. and May, J.C., Eds., Lyophilization/Freeze Drying of Pharmaceutical and Biological Products, 3rd Edition, Informa Inc., New York, 288-316.
- Malik, K.P., Duru, C., Ahmed, M. and Matejtschuk, P. (2010) Analytical Options for the Measurement of Residual Moisture Content in Lyophilized Biological Materials. American Pharmaceutical Review, 13, 42-47.
- May, J.C., Grim, E., Wheeler, R.M. and West, J. (1982) Determination of Residual Moisture in Freeze Dried Viral Vaccines: Karl Fischer, Gravimetric and Thermogravimetric Methodologies. Journal of Biological Standardization, 10, 249-259. http://dx.doi.org/10.1016/S0092-1157(82)80026-7
- May, J.C., Del Grosso, A., Etz, N., Wheeler, R. and Rey, L. (2006) Thermogravimetry and Vapour Pressure Moisture—Applications to Determination of Residual Moisture in BCG Vaccines. Journal of Thermal Analysis and Calorimetry, 83, 31-33. http://dx.doi.org/10.1007/s10973-005-7052-6
- WHO (2006) Recommendations for the Preparation, Characterization and Establishment of International and Other Biological Reference Standards (Revised 2004). WHO Technical Report Series 932, Annex 2, 73-131.
- Schmitt, K. and Isengard, H.D. (1997) Method for Avoiding the Interference of Formamide with the Karl Fischer Titration. Fresenius’ Journal of Analytical Chemistry, 357, 806-811. http://dx.doi.org/10.1007/s002160050253