Comparison of Different Sampling Techniques for the Identification of Aromatic Hydrocarbons from Fire Effluents
- 1 King Fahd Security College, Riyadh, Kingdom of Saudi Arabia
- 2 Chemistry Department, College of Science, King Saud University, Riyadh, Kingdom of Saudi Arabia
- 3 Centre for Fire Hazards and Science, School of Physical Sciences and Computing, University of Central Lancashire, Preston, UK
- 4 Centre for Fire Hazards and Science, School of Physical Sciences and Computing, University of Central Lancashire, Preston, UK
Abstract
Huge amounts of various polymers are being used in many fields with numerous benefits. However, their great ability to ignition and rapid flame spreading make these materials dangerous for human life and properties due to the release of highly toxic combustion products. The present work aims to investigate several methods of sampling and identification of aromatic hydrocarbons produced by controlled burning of low-density polyethylene (LDPE) using a toxicity tube furnace. Five different sampling methods were used: solid phase micro extraction (SPME), syringe, tedlar bags, sorption tubes, and gas-solution absorbers (midget impingers). The produced hydrocarbons were analysed by gas chromatography coupled to mass spectrometry with and without pyrolysis. Among the tested techniques, the most convenient sampling method was using syringe with a glass vessel which allowed detection of the highest amount of aromatic hydrocarbons at both 800°C and 600°C, and then followed by SPME. On the other hand, the use of gas-solution absorber (midget impinger) showed poorer results. Regarding the use of tedlar bags and sorption tubes, they did not give satisfactory results. Several carcinogenic or possibly carcinogenic compounds were identified in the combustion products, such as benzene, naphthalene, anthracene and pyrene.
- Dhabbah, A.M. (2015) Ways of Analysis of Fire Effluents and Assessment of Toxic Hazards. Journal of Analytical Sciences, Methods and Instrumentation, 5, 1-12. https://doi.org/10.4236/jasmi.2015.51001
- Gann, R. (2008) Fire Effluent, People, and Standards: Standardization Philosophy for the Effects of Fire Effluent on Human Tenability. Conference on Hazards of Combustion Products, London, 10-11 November 2008.
- Purser, D. (1992) The Evolution of Toxic Effluents in Fires and the Assessment of Toxic Hazard. Toxicology Letters, 64-65, 247-255. https://doi.org/10.1016/0378-4274(92)90196-Q
- Hull, T.R., Brein, D. and Stec, A.A. (2016) Quantification of Toxic Hazard from Fires in Buildings. Journal of Building Engineering, 8, 313-318. https://doi.org/10.1016/j.jobe.2016.02.014
- Purser, D.A. (2010) Hazards from Smoke and Irritants. In: Stec, A.A. and Hull, T.R., Eds., Fire Toxicity, Woodhead Publishing, Cambridge, 51-117. https://doi.org/10.1533/9781845698072.2.51
- Hull, T.R. and Stec, A.A., (2010) Introduction to fire Toxicity. In: Stec, A.A. and Hull, T.R., Eds., Fire Toxicity, Woodhead Publishing, Cambridge, 3-25. https://doi.org/10.1533/9781845698072.1.3
- Stec, A.A. (2010) Experimental Methods in Combustion Toxicology. In: Stec, A.A. and Hull, T.R., Eds., Fire Toxicity, Woodhead Publishing, Cambridge, 217-228. https://doi.org/10.1533/9781845698072.3.217
- Purser, D. (2008) Assessment of Hazards to Occupants from Smoke, Toxic Gases, and Heat. In: Hurley, M, Ed., SFPE Handbook of Fire Protection Engineering, Springer-Verlag, New York, 2-96.
- Blomqvist, P., McNamee, M.S., Andersson P. and Lönnermark, A. (2011) Polycyclic Aromatic Hydrocarbons (PAHs) Quantified in Large-Scale Fire Experiments. Fire Technology Journal, 48, 513-528. https://doi.org/10.1007/s10694-011-0242-9
- Fardell, P. and Guillaume, E. (2010) Sampling and Measurement of Toxic Fire Effluent. In: Stec, A.A. and Hull, T.R., Eds., Fire Toxicity, 1st Edition, Woodhead Publishing, Cambridge, 385-423. https://doi.org/10.1533/9781845698072.4.385
- Public Health England (PHE) (2017) Contaminated Land Information Sheet: Risk Assessment Approaches for Polycyclic Aromatic Hydrocarbons (PAHs). London. https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_ data/file/671075/Contaminated_land_information_sheet_PAHs.pdf
- BS (2013) ISO 19701:2013 Methods for Sampling and Analysis of Fire Effluents. London.