29% P<sub>2</sub>O<sub>5</sub> Phosphoric Acid Desulphation: Improving the Performance of the Unit of Concentration
- 1 Laboratory of Physical Chemistry of Materials (LPCM), Department of Chemistry, Faculty of Science, Chouaïb Doukkali University, El Jadida, Morocco
- 2 Laboratory of Physical Chemistry of Materials (LPCM), Department of Chemistry, Faculty of Science, Chouaïb Doukkali University, El Jadida, Morocco
- 3 Laboratory of Physical Chemistry of Materials (LPCM), Department of Chemistry, Faculty of Science, Chouaïb Doukkali University, El Jadida, Morocco
- 4 Laboratory of Physical Chemistry of Materials (LPCM), Department of Chemistry, Faculty of Science, Chouaïb Doukkali University, El Jadida, Morocco
Abstract
Clogging in the heat exchangers of the phosphoric acid concentration unit is a phenomenon which hinders the proper functioning of the installation. It results in the accumulation of undesirable solid deposits on the pipes and consequently a decrease of its performance. This deposit is mainly anhydrous or hemihydrate gypsum in addition to Na 2 SiF 6 . Phosphoric acid desulphation before its concentration step allows reducing this undesirable effect. Barium carbonate is used for the retention of sulphate ions using a simple experimental protocol which can easily be inserted into the phosphoric acid manufacturing. Four factors: quality of the phosphoric acid to be concentrated, amount of barium carbonate, temperature and time, were studied using design of experiment (DOE) methodology with two-level full factorial design strategy in order to assess their effects on desulphation. Only the first two factors have significant effects. Therefore, for effective sulphate removal, the validated statistical model ( R 2 = 99.96%) allows to predict the amount of barium carbonate to be used, depending on quality of the phosphoric acid to be concentrated and using the available temperature and time in the industrial process.
- Becker, P. (1989) Phosphates & Phosphoric Acid: Row Materials, Technology & Economics of the Wet Process. 2nd Edition, Marcel Dekker, New York.
- Hignett, T.P. (1980) Proceedings of Second International Congress on Phosphorous Compounds, Boston, 21-25 April 1980, 401-429.
- Kirfel, A. and Will, G. (1980) Charge Density in Anhydrite, CaSO4, from X-Ray and Neutron Diffraction Measurements. Acta Crystallographica Section B, 36, 2881-2890. https://doi.org/10.1107/S0567740880010461
- Cipriani, C. (1955) Structure of Na2SiF6 and Na2GeF. Rend. Soc. Mineral. Ital., 11, 58.
- Pereira, P. (2003) Phosphoric Acid Production by Hydrochloric Attack of Phosphate Ores with Reduction of Environmental Nuisances and Recovery of Rare Earths as By-Products Geochemistry. National School of Mines of Saint-Etienne, France.
- Bott, R.T. (1995) Fouling of Heat Exchangers. Elsevier Science & Technology Books, Amsterdam.
- Montgomery, D.C. (1997) Design and Analysis of Experiments. 4th Edition, John Wiley and Sons, New York.
- Hebbar, A. (2006) Statistical Methods of Extreme Planning of Experiments. University of Mostaganem, Mostaganem, 71-72.