Finite Element Analysis of Magnetohydrodynamic Mixed Convection in a Lid-Driven Trapezoidal Enclosure Having Heated Triangular Block — Oak Academic Publishing
Research ArticleOpen AccessGoogle Scholar indexed
Finite Element Analysis of Magnetohydrodynamic Mixed Convection in a Lid-Driven Trapezoidal Enclosure Having Heated Triangular Block
Department of Arts and Sciences, Ahsanullah University of Science & Technology (AUST), Dhaka, Bangladesh
,
Department of Mathematics, Bangladesh University of Engineering & Technology (BUET), Dhaka, Bangladesh
,
Department of Mathematics, Jahangirnagar University, Dhaka, Bangladesh
1 Department of Arts and Sciences, Ahsanullah University of Science & Technology (AUST), Dhaka, Bangladesh
2 Department of Mathematics, Bangladesh University of Engineering & Technology (BUET), Dhaka, Bangladesh
3 Department of Mathematics, Jahangirnagar University, Dhaka, Bangladesh
A numerical research on magnetohydrodynamic mixed convection flow in a lid-driven trapezoidal enclosure at non-uniform heating of bottom wall has been studied numerically. The enclosure consists of insulated top wall and cold side walls, too. It also contains a heated triangular block ( Rot = 0 ° - 90 ° ) located somewhere inside the enclosure. The boundary top wall of the enclosure is moving through uniform speed U 0 . The geometry of the model has been represented mathematically by coupled governing equations in accordance with proper boundary conditions and then a two-dimensional Galerkin finite element based numerical approach has been adopted to solve this paper. The numerical computations have been carried out for the wide range of parameters Prandtl number (0.5 ≤ Pr ≤ 2), Reynolds number (60 ≤ Re ≤ 120), Rayleigh number ( Ra = 10 3 ) and Hartmann number ( Ha = 20) taking with different rotations of heated triangular block. The results have been shown in the form of streamlines, temperature patterns or isotherms, average Nusselt number and average bulk temperature of the fluid in the enclosure at non-uniform heating of bottom wall. It is also indicated that both the streamlines, isotherm patterns strongly depend on the aforesaid governing parameters and location of the triangular block but the thermal conductivity of the triangular block has a noteworthy role on the isotherm pattern lines. Moreover, the variation of Nu av of hot bottom wall and θ av in the enclosure is demonstrated here to show the characteristics of heat transfer in the enclosure.
KeywordsMixed ConvectionMagentohydrodynamicFinite Element MethodTrapezoidal EnclosureTriangular BlockNon-Uniform Heating
Aydin, O. (1999) Aiding and Opposing Mechanisms of Mixed Convection in a Shear Buoyancy Driven Cavity. International Communications in Heat and Mass Transfer, 26, 1019-1028. https://doi.org/10.1016/S0735-1933(99)00091-3
Aydin, O. and Yang, W.J. (2000) Mixed Convection in Cavities with a Locally Heated Lower Wall and Moving Side Walls. Numerical Heat Transfer, Part A, 37, 695-710. https://doi.org/10.1080/104077800274037
Guo, G. and Sharif, M.A.R. (2004) Mixed Convection in Rectangular Cavities at Various Aspect Ratios with Moving Isothermal Side Walls and Constant Flux Heat Source on the Bottom Wall. International Journal of Thermal Sciences, 43, 465-475. https://doi.org/10.1016/j.ijthermalsci.2003.08.008
Oztop, H.F. and Dagtekin, I. (2004) Mixed Convection in Two-Sided Lid-Driven Differentially Heated Square Cavity. International Journal of Heat and Mass Transfer, 47, 1761-1769. https://doi.org/10.1016/j.ijheatmasstransfer.2003.10.016
Hossain, M.A. and Gorla, R.S.R. (2006) Effect of Viscous Dissipation on Mixed Convection Flow of Water near Its Density Maximum in a Rectangular Enclosure with Isothermal Wall. International Journal of Numerical Methods for Heat and Fluid Flow, 16, 5-17. https://doi.org/10.1108/09615530610636928
Luo, W.J. and Yang, R.J. (2007) Multiple Fluid Flow and Heat Transfer Solutions in a Two Sided Lid-Driven Cavity. International Journal of Heat and Mass Transfer, 50, 2394-2405. https://doi.org/10.1016/j.ijheatmasstransfer.2006.10.025
Al-Amiri, A., Khanafer, K., Bull, J. and Pop, I. (2007) Effect of Sinusoidal Wavy Bottom Surface on Mixed Convection Heat Transfer in a Lid-Driven Cavity. International Journal of Heat and Mass Transfer, 50, 1771-1780. https://doi.org/10.1016/j.ijheatmasstransfer.2006.10.008
Saha, S., Saha, G. and Hasan, N. (2010) Mixed Convection in a Lid-Driven Cavity with Internal Heat Source. Proceedings of the 13 the Annual Paper Meet, Dhaka, 1-6.
Nasrin, R. and Parvin, S. (2011) Hydromagnetic Effect on Mixed Convection in a Lid-Driven Cavity with Sinusoidal Corrugated Bottom Surface. International Communications in Heat and Mass Transfer, 38, 781-789. https://doi.org/10.1016/j.icheatmasstransfer.2011.03.002
Bhattacharya, M., Basak, T., Oztop, H.F. and Varol, Y. (2013) Mixed Convection and Role of Multiple Solutions in Lid-Driven Trapezoidal Enclosures. International Journal of Heat and Mass Transfer, 63, 366-388. https://doi.org/10.1016/j.ijheatmasstransfer.2013.03.028
Chattopadhyay, A. and Pandit, S.K. (2015) A Peclet Number Based Analysis of Mixed Convection for Lid-Driven Porous Trapezoidal Enclosure. Procedia Engineering, 127, 628-635. https://doi.org/10.1016/j.proeng.2015.11.354
Basak, T., Roy, S. and Pop, I. (2009) Heat Flow Analysis for Natural Convection within Trapezoidal Enclosures Based on Heatline Concept. International Journal of Heat and Mass Transfer, 52, 2471-2483. https://doi.org/10.1016/j.ijheatmasstransfer.2009.01.020
Kareem, A.K., Mohammed, H.A., Hussein, A.K. and Gao, S. (2016) Numerical Investigation of Mixed Convection Heat Transfer of Nanofluids in a Lid-Driven Trapezoidal Cavity. International Communications in Heat and Mass Transfer, 77, 195-205. https://doi.org/10.1016/j.icheatmasstransfer.2016.08.010
Uddin, M.B., Rahman, M.M., Khan, M.A.H., Saidur, R. and Ibrahim, T.A. (2016) Hydromagnetic Double-Diffusive Mixed Convection in Trapezoidal Enclosure Due to Uniform and Nonuniform Heating at the Bottom Side: Effect of Lewis Number. Alexandria Engineering Journal, 55, 1165-1176. https://doi.org/10.1016/j.aej.2016.03.035
Hossain, M.S. and Alim, M.A. (2013) MHD Free Convection within Trapezoidal Cavity with Uniformly Heated Bottom Wall. Annals of Pure and Applied Mathematics, 3, 41-55.
Hossain, M.S. and Alim, M.A. (2014) MHD Free Convection within Trapezoidal Cavity with Non-Uniformly Heated Bottom Wall. International Journal of Heat and Mass Transfer, 69, 327-336. https://doi.org/10.1016/j.ijheatmasstransfer.2013.10.035
Hossain, M.S., Alim, M.A. and Andallah, L.S. (2018) Numerical Investigation of Natural Convection Flow in a Trapezoidal Cavity with Non-Uniformly Heated Triangular Block Embedded inside. Journal of Advances in Mathematics and Computer Science, 28, 1-30. https://doi.org/10.9734/JAMCS/2018/43101
Selimefendigil, F., Öztop, H.F. and Chamkha, A.J. (2017) Analysis of Mixed Convection of Nanofluid in a 3D Lid-Driven Trapezoidal Cavity with Flexible Side Surfaces and Inner Cylinder. International Communications in Heat and Mass Transfer, 87, 40-51. https://doi.org/10.1016/j.icheatmasstransfer.2017.06.015
Gangawane, K.M. (2017) Computational Analysis of Mixed Convection Heat Transfer Characteristics in Lid-Driven Cavity Containing Triangular Block with Constant Heat Flux: Effect of Prandtl and Grashof Numbers. International Journal of Heat and Mass Transfer, 105, 34-57. https://doi.org/10.1016/j.ijheatmasstransfer.2016.09.061
Gangawane, K.M., Oztop, H.F. and Abu-Hamdeh, N. (2018) Mixed Convection Characteristic in a Lid-Driven Cavity Containing Heated Triangular Block: Effect of Location and Size of Block. International Journal of Heat and Mass Transfer, 124, 860-875. https://doi.org/10.1016/j.ijheatmasstransfer.2018.03.079
Selimefendigil, F. and Öztop, H.F. (2018) Modeling and Optimization of MHD Mixed Convection in a Lid-Driven Trapezoidal Cavity Filled with Alumina-Water Nanofluid: Effects of Electrical Conductivity Models. International Journal of Mechanical Sciences, 136, 264-278. https://doi.org/10.1016/j.ijmecsci.2017.12.035
Mehmood, Z. (2019) Numerical Simulations and Linear Stability Analysis of Mixed Thermomagnetic Convection through Two Lid-Driven Entrapped Trapezoidal Cavities Enclosing Ferrofluid Saturated Porous Medium. International Communications in Heat and Mass Transfer, 109, Article ID: 104345. https://doi.org/10.1016/j.icheatmasstransfer.2019.104345
Haq, R.U. and Aman, S. (2019) Water Functionalized CuO Nanoparticles Filled in a Partially Heated Trapezoidal Cavity with Inner Heated Obstacle: FEM Approach. International Journal of Heat and Mass Transfer, 128, 401-417. https://doi.org/10.1016/j.ijheatmasstransfer.2018.08.088
Çolak, E., Öztop, H.F. and Ekici, Ö. (2020) MHD Mixed Convection in a Chamfered Lid-Driven Cavity with Partial Heating. International Journal of Heat and Mass Transfer, 156, Article 11990. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119901
Singh, S. and Sharif, M.A.R. (2003) Mixed Convective Cooling of a Rectangular Cavity with Inlet and Exit Openings on Differentially Heated Side Walls. Numerical Heat Transfer, Part A, 44, 233-253. https://doi.org/10.1080/716100509
Corvaro, F. and Paroncini, M. (2008) A Numerical and Experimental Analysis on the Natural Convection Heat Transfer of a Small Heating Strip Located on the Floor of a Square Cavity. Applied Thermal Engineering, 28, 25-35. https://doi.org/10.1016/j.applthermaleng.2007.03.018
Dechaumphai, P. (1999) Finite Element Method in Engineering. 2nd Edition, Chulalongkorn University Press, Bangkok.
Taylor, C. and Hood, P. (1973) A Numerical Solution of the Navier-Stokes Equations Using Finite Element Technique. Computer and Fluids, 1, 73-100. https://doi.org/10.1016/0045-7930(73)90027-3
Reddy, J.N. (1985) An Introduction to the Finite Element Method. McGraw-Hill, New York.