The purpose of this study is to measure the level of awareness of lean technology among micro small medium enterprises (MSME) operating in Nigeria and evaluate their willingness to adopt it. Micro small medium enterprises for many decades have proven to be the strength of Nigeria economy, as it constitutes over 90% of the existing enterprises while creating millions of Jobs. As important as micro small medium enterprises are to Nigeria economy, they have very high mortality rate ranking globally, their inability to perform, deliver can be attributed to harsh, unstable business environment. The numerous challenges facing Micro small medium enterprises can be defeated, if the right management tools are deployed. Reduction of systematic waste associated with doing business in Nigeria, by introduction of lean technology to Micro small medium enterprise, will greatly enhance their operational efficiency and improve their performance; thereby cutting to large extent their high mortality rate. For micro small medium enterprises to understand and embrace lean technology there must be high level of awareness and willing ness to adopt it. Quantitative research method was used in analyzing valid data from 137 respondents spread across different regions and who identified as micro small medium enterprises. The finding shows that micro small medium enterprises operators in Nigeria are not aware of the existence of lean technology, therefore are not willing to adopt it in operating their businesses .
KeywordsLean TechnologyMicro Small Medium EnterprisesWillingness to Adopt LeanAwareness of LeanNigeria
Abiodun, E. A. (2014). The Role of SMEs Firm Performance in Nigeria. Department of Business Management University of Malaysia (UNIMAS)
Abioye, T. E., & Bello, E. I. (2012). A Review of Awareness and Implementation of Lean Manufacturing within Nigerian Small-Scale Manufacturing Companies. https://www.davidpublisher.com/Public/uploads/Contribute/551b8eaa21e7b.pdf
Achanga, P., Shehab, E., Roy, R., & Nelder, G. (2006). Critical Success Factors for Lean Implementation within SMEs. Journal of Manufacturing Technology Management, 17, 460-471. https://doi.org/10.1108/17410380610662889
Agnieszka, G., & Karolina, W. L. (2016). Importance of Lean Management in Contemporary Enterprise—Research Result. Research in Logistic and Production, 6, 195-206. https://doi.org/10.21008/j.2083-4950.2016.6.3.1
Al Balkhy, W., Sweis, R., & Lafhaj, Z. (2021). Barriers to Adopting Lean Construction in the Construction Industry—The Case of Jordan. Buildings, 11, Article 222. https://doi.org/10.3390/buildings11060222
Al-Najem, M. (2017). Investigating the Factors Affecting the Readiness for Lean System Adoption within Kuwaiti Small & Medium Size Manufacturing Industries. University of Portsmouth, 460 p.
Amade, B., Amaeshi, U., Echeme, I. et al. (2021). Awareness, Use and Benefits of Lean Technologies on Construction Projects in Nigeria. International Scientific Research Journal, 2, 310-332.
Ankomah, E. N., Ayarkwa, J., & Agyekum, K. (2017). A Theoretical Review of Lean Implementation within Construction SMEs. Journal of Construction Project Management & Innovation, 7, 71-83.
Babalola, O. D., Ibem, E. O., & Ezema, I. C. (2018). Assessment of Awareness and Adoption of Lean Practices in the Nigeria Building Industry. International Journal of Civil Engineering & Technology (IJCIET), 9, 1626-1640.
Belekoukias, I., Garza-Reyes, J. A., & Kumar, V. (2014). The Impact of Lean Methods and Tools on the Operational Performance of Manufacturing Organisations. International Journal of Production Research, 52, 5346-5366. https://doi.org/10.1080/00207543.2014.903348
Chan, D. W., Olawumi, T. O., & Ho, A. M. (2019). Perceived Benefits of and Barriers to Building Information Modelling (BIM) Implementation in Construction: The Case of Hong Kong. Journal of Building Engineering, 25, Article 100764. https://doi.org/10.1016/j.jobe.2019.100764
Chan, S. W., Ismail, F., Ahmad, M. F., Zaman, I., & Lim, H. Q. (2019). Factors and Barriers Influencing Lean Production System Adoption in Manufacturing Industries. International Journal Supply Chain Management, 8, 939-946.
Deranek, K., Chopra, S., & Mosher, G. A. (2017). Lean Adoption in a Small and Medium Enterprise: Model Validation. The Journal of Technology, Management, and Applied Engineering, 33, 1-13.
Dora, M., Van Goubergen, D., Kumar, M., Molnar, A., & Gellynck, X. (2014). Application of Lean Practices in Small and Medium-Sized Food Enterprises. British Food Journal, 116, 125-141. https://doi.org/10.1108/BFJ-05-2012-0107
Douglas, J., Douglas, A., Muturi, D., & Ochieng, J. (2017). An Exploratory Study of Critical Success Factors for SMEs in Kenya. https://www.researchgate.net/publication/319930935
Enoch, O. K. (2013). Lean Six Sigma Methodologies and Organizational Profitability: A Review of Manufacturing SMEs in Nigeria. American Journal of Industrial and Business Management, 3, 573-582. https://doi.org/10.4236/ajibm.2013.36066
Etim, E. & Akpan, J. & Inyang, A., & Ekikor, M. (2022). Small Business Mortality and Survival Strategies in Nigeria. International Journal of Applied Business and Management Sciences, 3, 121-160.
Fullerton, R. R., Kennedy, F. A., & Widener, S. K. (2014). Lean Manufacturing and Firm Performance: The Incremental Contribution of Lean Management Accounting Practices, Journal of Operations Management, 32, 414-428. https://doi.org/10.1016/j.jom.2014.09.002
Hallam, C. R. A., Valerdi, R., & Contreras, C. (2018). Strategic Lean Actions for Sustainable Competitive Advantage. The International Journal of Quality & Reliability Management, 35, 481-509. https://doi.org/10.1108/IJQRM-10-2016-0177
Holweg, M. (2007). The Genealogy of Lean Production. Journal of Operations Management, 25, 420-437. https://doi.org/10.1016/j.jom.2006.04.001
Hu, Q., Mason, R., Williams, S., & Found, P. (2015). Lean Implementation within SMEs: A Literature Review. Journal of Manufacturing Technology Management, 26, 980-1012. https://doi.org/10.1108/JMTM-02-2014-0013
Inuwa, M., & Rahim, S. B. A. (2020). Lean Readiness Factors & Organizational Readiness for Change in Manufacturing SMEs: The Role of Organizational Culture. Journal of Critical Review, 7, 56-67.
Keitany, P., & Riwo-Abudho, M. (2014). Effects of Lean Production on Organizational Performance: A Case Study of Flour Producing Company in Kenya. European Journal of Logistics Purchasing and Supply Chain Management, 2, 1-14.
Lodgaard, E., Ingvaldsen, J., Gamme, I., & Aschehoug, S. (2016). Barriers to Lean Implementation: Perceptions of Top Managers, Middle Managers and Workers. Procedia CIRP, 57, 595-600. https://doi.org/10.1016/j.procir.2016.11.103
Mokuolu, J. O., & Oluwaleye, T. O. (2023). The Role of Small and Medium Scale Enterprises in Unemployment Reduction in Nigeria. Nigerian Journal of Banking and Financial Issues, 9, 127-137.
Negrão, L. L. L., Sousa Jabbour, A. B. L., Latan, H., Godinho Filho, M., Chiappetta Jab-Bour, C. J., & Ganga, G. M. D. (2020). Lean Manufacturing and Business Performance: Testing the S-Curve Theory. Production Planning & Control, 31, 771-785. https://doi.org/10.1080/09537287.2019.1683775
Odeyinka, O., Oluwaseyi, J. A., & Akinyele, A. (2018). An Assessment of the Implementation of Lean Concept in Nigeria Manufacturing Companies. International Journal of Advanced Engineering and Management Research, 3, 156-166.
Ogunro, V. (2014). Nigeria’s Business Environment: Issues Challenges and Prospects. International Journal of Academic Research in Business and Social Sciences, 4, 132-138. https://doi.org/10.6007/IJARBSS/v4-i4/770
Oladiran, O. J. (2018). Causes and Minimization Techniques of Materials Waste in Nigerian Construction Process. https://www.researchgate.net/publication/329786918
Panigrahi, S., Al Ghafri, K. K., Al Alyani, W. R., Ali Khan, M. W., Al Madhagy, T., & Khan, A. (2023) Lean Manufacturing Practices for Operational and Business Performance: A PLS-SEM Modeling Analysis. International Journal of Engineering Business Management, 15. https://doi.org/10.1177/18479790221147864
Salem, R., Musharavati, F., Hamouda, A., & Al-Khalifa, K. N. (2015). An Empirical Study on Lean Awareness and Potential for Lean Implementations in Qatar Industries. International Journal of Advanced Manufacturing Technology, 82, 1607-1625. https://doi.org/10.1007/s00170-015-7421-7
Schroeder, R. G., & Flynn, B. B. (2001). High Performance Manufacturing: Global Perspectives. John Wiley & Sons.
SMEDAN & NBS (2017). National Survey of Micro Small & Medium Enterprises (MSMEs).
Sohal, S. A., & Egglestone, A. (1994). Lean Production: Experience among Australian Organizations. International Journal of Operations & Production Management, 14, 35-51. https://doi.org/10.1108/01443579410068639
Umude-Igbru, O., & Price, B. (2015). Acceptability of Lean Six Sigma in a Developing Economy: Results from Exploratory Research in Nigerian Consulting Companies. In 2015 International Conference on Industrial Engineering and Operations Management (IEOM) (pp. 1-8). IEE. https://doi.org/10.1109/IEOM.2015.7093706
Womack, J. P., & Jones, D. T. (1997). Banish Waste and Create Wealth in Your Corporation. https://www.researchgate.net/publication/31998856_Lean_Thinking_Banish_Waste_and_Create_Wealth_in_Your_Corporation
World Bank (2023). Annual Report 2023: A New Era in Development. https://www.worldbank.org/en/about/annual-report
Zhou, B. (2012). Lean Principles, Practices, and Impacts: A Study on Small and Medium-Sized Enterprises (SMEs). Annals of Operations Research, 241, 457-474. https://doi.org/10.1007/s10479-012-1177-3