Residual stresses can reduce the reliability of plastic injection molding parts. This work is an attempt to model the residual stresses as a function of injection molding parameters. More stress is placed on reducing the number of input factors and to include all possible interactions. For this purpose, two-stage experimentation is suggested: a factor screening stage and Response Surface optimization stage. In screening stage Taguchi 3 level experimental design is used to classify the input parameters as significant and non-significant factors. Eight input variables were classified into 3 non-significant and 5 significant factors using this screening stage. Thus for the Response Surface optimization stage: instead of doing 160 experiments in Central Composite, 56 are only needed after the screening stage in half Central Composite Design. The best subset and regression model fitting tools in addition to model verification using randomly selected input setting were used to select a model for predicting residual stresses with a verified Root Mean Square Error (RSME) of nearly 0.93 MPa.
Chen, X., Lam, Y.C. and Li, D.Q. (2000) Analysis of Thermal Residual Stress in Plastic Injection Molding. Journal of Materials Processing Technology, 101, 275-280. http://dx.doi.org/10.1016/S0924-0136(00)00472-6
Kurt, M., Kamber, S., Kaynak, Y., Atakok, G. and Girit, O. (2009) Experimental Investigation of Plastic Injection Molding: Assessment of the Effects of Cavity Pressure and Mold Temperature on the Quality of the Final Products. Materials and Design, 30, 3217-3124. http://dx.doi.org/10.1016/j.matdes.2009.01.004
Hassan, H., Regnier, N., Pujos, C., Arquis, E. and Defaye, G. (2010) Modeling the Effect of Cooling System on the Shrinkage and Temperature of the Polymer by Injection Molding. Applied Thermal Engineering, 30, 1547-1557. http://dx.doi.org/10.1016/j.applthermaleng.2010.02.025
Oktem, H., Erzurumlu, T. and Uzman, I. (2007) Application of Taguchi Optimization Technique in Determining Plastic Injection Molding Process Parameters for a Thin Shell Part. Materials and Design, 28, 1271-1278. http://dx.doi.org/10.1016/j.matdes.2005.12.013
Chiang, K.-T. and Chang, F.-P. (2006) Application of Grey-Fuzzy Logic on the Optimal Process Design of an Injection-Molded Part with a Thin Shell Feature. International Communications in Heat and Mass Transfer, 33, 94-101. http://dx.doi.org/10.1016/j.icheatmasstransfer.2005.08.006
Ozcelik, B. and Erzurumlu, T. (2005) Determination of Effecting Dimensional Parameters on Warpage of Thin Shell Plastic Parts Using Integrated Response Surface Method and Genetic Algorithm. International Communications in Heat and Mass Transfer, 32, 1085-1094. http://dx.doi.org/10.1016/j.icheatmasstransfer.2004.10.032
Barghash, M.A. and Alkaabneh, F.A. (2014) Shrinkage and Warpage Detailed Analysis and Optimization for the Injection Molding Process Using Multistage Experimental Design. Quality Engineering, 26, 319-334. http://dx.doi.org/10.1080/08982112.2013.852679
Kim, C-H. and Youn, J-R. (2007) Determination of Residual Stresses in Injection-Moulded Flat Plate: Simulation and Experiments. Polymer Testing, 26, 862-868. http://dx.doi.org/10.1016/j.polymertesting.2007.05.006
Choi, D.-S. and Im, Y.-T. (1999) Prediction of Shrinkage and Warpage in Consideration of Residual Stress in Integrated Simulation of Injection Molding. Composite Structures, 47, 655-665. http://dx.doi.org/10.1016/S0263-8223(00)00045-3
Wang, T.-H. and Young, W.-B. (2005) Study on Residual Stresses of Thin-Walled Injection Molding. European Polymer Journal, 41, 2511-2517. http://dx.doi.org/10.1016/j.eurpolymj.2005.04.019
Kamal, M., Lai-Fook, R. and Hernandez-Aguilar, J. (2002) Residual Thermal Stresses in Injection Moldings of Thermoplastics: A Theoretical and Experimental Study. Polymer Engineering & Science, 42, 1098-1114. http://dx.doi.org/10.1002/pen.11015
Mathivanan, D. and Parthasarathy, N.-S. (2009) Sink-Mark Minimization in Injection Molding through Response Surface Regression Modeling and Genetic Algorithm. International Journal of Advanced Manufacturing Technology, 45, 867-874. http://dx.doi.org/10.1007/s00170-009-2021-z
Changyu, S., Lixia, W. and Qian, L. (2007) Optimization of Injection Molding Process Parameters Using Combination of Artificial Neural Network and Genetic Algorithm Method. Journal of Materials Processing Technology, 183, 412-418. http://dx.doi.org/10.1016/j.jmatprotec.2006.10.036
Zhao, P., Zhou, H., Li, Y. and Li, D. (2010) Process Parameters Optimization of Injection Molding Using a Fast Strip Analysis as a Surrogate Model. International Journal of Advanced Manufacturing Technology, 49, 949-959. http://dx.doi.org/10.1007/s00170-009-2435-7
Park, K. and Ahn, J. (2004) Design of Experiment Considering Two-Way Interactions and Its Application to Injection Molding Processes with Numerical Analysis. Journal of Materials Processing Technology, 146, 221-227. http://dx.doi.org/10.1016/j.jmatprotec.2003.10.020
Chen, C.-P., Chuang, M.-T., Hsiao, Y.-H., Yang, Y.-K. and Tsai, C.-H. (2009) Simulation and Experimental Study in Determining Injection Molding. Expert Systems with Applications, 36, 10752-10759. http://dx.doi.org/10.1016/j.eswa.2009.02.017
AlKaabneh, F.A., Barghash, M. and Mishael, I. (2013) A Combined Analytical Hierarchical Process (AHP) and Taguchi Experimental Design (TED) for Plastic Injection Molding Process Settings. The International Journal of Advanced Manufacturing Technology, 66, 679-694.
Erzurumlu, T. and Ozcelik, B. (2006) Minimization of Warpage and Sink Index in Injection Molded Thermoplastic Parts Using Taguchi Optimization Method. Materials and Design, 27, 853-861. http://dx.doi.org/10.1016/j.matdes.2005.03.017
Ozcelik, B., Ozbay, A. and Demirbas, E. (2010) Influence of Injection Parameters and Mold Materials on Mechanical Properties of ABS in Plastic Injection Molding. International Communications in Heat and Mass Transfer, 37, 1359-1365. http://dx.doi.org/10.1016/j.icheatmasstransfer.2010.07.001
Taguchi, G. (1990) Introduction to Quality Engineering. McGraw-Hill, New York.
Liao, S., Hsieh, W., Wang, J. and Su, Y. (2004) Shrinkage and Warpage Prediction of Injection-Molded Thin-Wall Parts Using Artificial Neural Networks. Polymer Engineering and Science, 44, 2029-2040. http://dx.doi.org/10.1002/pen.20206
Lin, B.-T., Jean, M.-D. and Chou, J.-H. (2007) Using Response Surface Methodology for Optimizing Deposited Partially Stabilized Zirconia in Plasma Spraying. Applied Surface Science, 253, 3254-3262. http://dx.doi.org/10.1016/j.apsusc.2006.07.021
Chen, C.-C., Su, P.-L. and Lin, Y.-C. (2009) Analysis and Modeling of Effective Parameters for Dimension Shrinkage Variation of Injection Molded Part with Thin Shell Feature Using Response Surface Methodology. International Journal of Advanced Manufacturing Technology, 45, 1087-1095. http://dx.doi.org/10.1007/s00170-009-2045-4
Postawa, P. and Koszkul, J. (2005) Change in Injection Moulded Parts Shrinkage and Weight as a Function of Processing Conditions. Journal of Materials Processing Technology, 162, 109-115. http://dx.doi.org/10.1016/j.jmatprotec.2005.02.241
Palardy, G., Hubert, P., Haider, M. and Lessard, L. (2008) Optimization of RTM Processing Parameters for Class A Surface Finish. Composites: Part B, 39, 1280-1286. http://dx.doi.org/10.1016/j.compositesb.2007.12.003
Simpoe Mesh Version 3.0.
Minitab 15, MINITAB Inc., 2007.
Simpoe-Mold 2011 R2.0.
Fung, C.-P. and Kang, P.-C. (2005) Multi-Response Optimization in Friction Properties of PBT Composites Using Taguchi Method and Principle Component Analysis. Journal of Materials Processing Technology, 170, 602-610. http://dx.doi.org/10.1016/j.jmatprotec.2005.06.040
Chiang, K.-T. and Chang, F.-P. (2007) Analysis of Shrinkage and Warpage in an Injection-Molded Part with a Thin Shell Feature Using the Response Surface Methodology. International Journal of Advanced Manufacturing Technology, 35, 468-479. http://dx.doi.org/10.1007/s00170-006-0739-4
Mallows, C.L. (1973) Some Comments on CP. Technometrics, 15, 661-675.