Sensivity Analysis of the Cellular Automata Model for Austenite-Ferrite Phase Transformation in Steels
- 1 AGH University of Science and Technology, Kraków, Poland
- 2 AGH University of Science and Technology, Kraków, Poland
- 3 AGH University of Science and Technology, Kraków, Poland
- 4 AGH University of Science and Technology, Kraków, Poland
Abstract
The main goal of the present research is to realize a sensitivity analysis of the developed complex micro scale austenite ( γ ) to ferrite ( α ) phase transformation model. The proposed solution is implemented in the developed Cellular Automata Framework that facilitates implementation of various microstructure evolution models. Investigated model predicts phase transformation progress starting from the fully austenitic or two-phase regions. Theoretical background of the implemented austenite-ferrite phase transformation model is presented in the paper. The defined transition rules for initiation and subsequent growth as well as internal variables for each particular CA cell are also discussed. Examples of results obtained from the developed model, as well as model capabilities are shown. Finally sensitivity analysis using Morris OAT Design is also presented and discussed.
- S. Das, E. J. Palmiere and I. C. Howard, “CAFE: A Tool for modeling Thermomechanical Processes,” E. J. Palmiere, M. Mahfouf and C. Pinna, Eds., Proceedings of an International Conference on Thermomechanical Processing: Mechanics, Microstructure, Control, Sheffield, 2326 June 2002, pp. 296-301.
- C. H. J. Davies, “Growth of Nuclei in a Cellular Automaton Simulation of Recrystalization,” Scripta Materialia, Vol. 36, No. 1, 1997, pp. 35-40. http://dx.doi.org/10.1016/S1359-6462(96)00331-4
- J. Gaw?d and M. Pietrzyk, “Application of CAFE Coupled Model to Description of Microstructure Development during Dynamic Recrystallization,” Archives of Metallurgy and Materials, Vol. 52, No. 2, 2007, pp. 257-266.
- L. Madej, P. D. Hodgson and M. Pietrzyk, “Development of the Multi-Scale Analysis Model to Simulate Strain Localization Occurring during Material Processing,” Archives of Computational Methods in Engineering, Vol. 16, No. 3, 2009, pp. 287-231. http://dx.doi.org/10.1007/s11831-009-9033-6
- P. Spytkowski, T. Klimek, L. Rauch and L. Madej, “Implementation of Cellular Automata Framework Dedicated to Digital Material Representation,” Computer Methods in Materials Science, Vol. 9, No. 2, 2009, pp. 283-288.
- L. Rauch, L. Madej and K. Perzynski, “Numerical Simulations of the Microscale Material Phenomena Based on Cellular Automata Framework and Workflow Idea,” Proceedings of the 17th ISPE International Conference on Concurrent Engineering, Cracow, 6-10 September 2010, pp. 539-546.
- R. Golab and L. Madej, “Development of the Complex Austenite—Ferrite Transformation Model Based on CA Method,” 22nd International Conference on Metallurgy and Materials, Brno, 15-17 May 2013.
- Y. J. Lan, D. Z. Li and Y. Y. Li, “Modeling Austenite Decomposition into Ferrite at Different Cooling Rate in Low-Carbon Steel with Cellular Automaton Method,” Acta Materialia, Vol. 52, No. 6, 2004, pp. 1721-1729. http://dx.doi.org/10.1016/j.actamat.2003.12.045
- M. Pietrzyk, L. Madej, L. Rauch and R. Golab, “Multiscale Modeling of Microstructure Evolution during Laminar Cooling of Hot Rolled DP Steels,” Archives of Civil and Mechanical Engineering, Vol. 10, No. 4, 2010, pp. 66-67. http://dx.doi.org/10.1016/S1644-9665(12)60031-4
- Y. J. Lan, N. M. Xiao, D. Z. Li and Y. Y. Li, “Mesoscale Simulation of Deformed Austenite Decomposition into Ferrite by Coupling a Cellular Automaton Method with a crystal Plasticity Finite Element Model,” Acta Materialia, Vol. 53, No. 4, 2005, pp. 991-1003. http://dx.doi.org/10.1016/j.actamat.2004.10.045