Effect of needle number on drying rate of kiwi fruit in EHD drying process
- 1 Department of Agricultural Machinery, Faculty of Agricultural Engineering and Technology, University of Tehran, Karaj, Iran
- 2 Department of Agricultural Machinery, Faculty of Agricultural Engineering and Technology, University of Tehran, Karaj, Iran
- 3 Department of Agricultural Machinery, Faculty of Agricultural Engineering and Technology, University of Tehran, Karaj, Iran
Abstract
Electrohydrodynamic (EHD) drying is a novel method of non-thermal processing. In this drying method, drying can be carried out using either AC or DC high voltages. The thermodynamic considerations regarding the lowering of temperature under EHD drying include rapid rates of evaporation and exothermic interaction of the electric field with a dielectric material. Multi-point and plate electrode systems are efficient in accelerating drying of agricultural materials. The electrode produces corona wind, which resembles a round jet, impinges and removes moisture from the surface. The enhancement of drying rate by corona discharge from needle electrodes has been experimentally evaluated in this study. Effects of three different categories, one needle, nine needles and seventeen needles on drying rate of kiwi fruit were studied, moreover in each category, Experiments were carried out using DC voltage levels of 6, 10.5 and 15 kV and field intensities 4.5 kV/cm. Results showed that the effect of needle number on drying rate was significant and drying rate of kiwi fruit reduced with increasing in needle numbers.
- Bai, Y., Sun, B. and Yang, G. (2011) Drying characteristics of Spanish mackerel during electrohydrodynamic (EHD) drying. Power and Energy Engineering Conference (APPEEC), Wuhan, 25-28 March 2011.
- Wall, R., Howard, J.J. and Bindu, J. (2001) The seasonal abundance of blow flies infesting drying fish in southwest India. Journal of Applied Ecology, 38, 339-348. doi:10.1046/j.1365-2664.2001.00588.x
- Ratti, C. (2001) Hot air and freeze-drying of high-value foods: A review. Journal of Food Engineering, 49, 311-319. doi:10.1016/S0260-8774(00)00228-4
- Sunjka, P.S., Rennie, T.J., Beaudry, C. and Raghavan, G.S.V. (2004) Microwave-convective and microwavevacuum drying of cranberries: A comparative study. Drying Technology, 22, 1217-1231. doi:10.1081/DRT-120038588
- Raghavan, G.S.V., Rennie, T.J., Sunjka, P.S., Orsat, V., Phaphuangwittayakul, W. and Terdtoon, P. (2005) Overview of new techniques for drying biological materials with emphasis on energy aspects. Brazilian Journal of Chemical Engineering, 22, 195-201. doi:10.1590/S0104-66322005000200005
- Baker, C.G.J. (2005) Energy efficient dryer operation. Drying Technology, 23, 2071-2087. doi:10.1080/07373930500210556
- Bai, Y., Yang, G., Hu, Y. and Qu, M. (2012) Physical and Sensory Properties of electrohydrodynamic (EHD) dried scallop muscle. Journal of Aquatic Food Product Technology, 21, 238-247. doi:10.1080/10498850.2011.590271
- Lai, F.C. and Sharma, R.K. (2005) EHD-enhanced drying with multiple needle electrode. Journal of Electrostatics, 63, 223-237. doi:10.1016/j.elstat.2004.10.004
- Chen, Y., Barthakur, N.N. and Arnold, N.P. (1994) Electrohydrodynamic (EHD) drying of potato slabs. Journal of Food Engineering, 23, 107-119. doi:10.1016/0260-8774(94)90126-0
- Lai, F.C. and Lai, K.W. (2002) EHD-enhanceddrying with wire electrode. Drying Technology, 20, 1393-1405. doi:10.1081/DRT-120005858
- Darabi, J., Ohadi, M.M. and Devoe, D. (2001) An electrohydrodynamic polarization micropump for electronic cooling. Journal of Microelectrome-chanical Systems, 10, 98-106. doi:10.1109/84.911097
- Cao, W., Nishiyama, Y. and Koide, S. (2004) Electrohydrodynamic drying characteristics of wheat using high voltage electrostatic field. Journal of Food Engineering, 62, 209-213. doi:10.1016/S0260-8774(03)00232-2
- Asakawa, Y. (1976) Promotion and retardation of heat transfer byelectric ?eld. Nature, 261, 220-221. doi:10.1038/261220a0