Design and Realization of a Detection Program of Conductive Slip Ring Based on LabVIEW
- 1 Key Laboratory of Airborne Optical Imaging and Measurement, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, China;Graduate School of the Chinese Academy of Sciences, Beijing 100039, China
- 2 Key Laboratory of Airborne Optical Imaging and Measurement, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, China
Abstract
The conductive slip ring is very useful in the industry equipments, which is an electric assembly being responsible for transporting energy and signals to the rotary body. In order to the conductive slip ring is sealing completely, it’s hard to detect that if its internal wires are conductive. The traditional manual detection is hard to finish that work when the number of the wires is big, and a real-time detection when the equipment is rotated is impossible. This paper uses NI's LabVIEW graphical programming software and DAQ board to realize an automatic detection system for the internal wires of slip ring, which can help us to judge if the wires are conductive when the equipment is rotated in real-time. At the same time, in this paper the application of LabVIEW in data acquisition is also studied.
- National Instruments Corporation, “Getting Started with LabVIEW,” June 2009 Edition, Part Number 373427F-01.
- National Instruments Corporation, “Getting Started with LabVIEW,” August 2007 Edition, Part Number 373427C-01.
- National Instruments Corporation, “LabVIEW User Manual,” August 2006 Edition, Part Number 374029B-01.
- National Instruments Corporation, “LabVIEW Help,” August 2006 Edition, Part Number 371361B-01.
- http://www.ni.com/
- R. Bitter, T. Mohuuddin and M. Nawrocki, “LabVIEW Advanced Programming Techniques,” CRC Press LLC, 2001.
- G. W. Johnson and M. G.-Hill, “LabVIEW Power Programming,” McGraw-Hill Companies, 1998.
- X. H. Chen and Y. H. Zhang, “LabVIEW 8.20 Program Design from Entry to Master,” Tsinghua University press, 2007.
- L. Wang and M. Tao, “Be Proficient in LabVIEW,” Publishing House of Electronics Industry, 2007.
- L. P. Yang, H. T. Li and L. Yang, “LabVIEW Program Design and Application,” Publishing House of electronics industry, 2005.
- L. P. Yang, H. T. Li and Y. Zhao, “LabVIEW Advanced Program Design,” Tsinghua University Press, 2003.