Based on the characteristics of wireless communication technology and Wireless Sensor Network, this paper studies the well site environmental monitoring system. The relevant hardware and software of the system are designed to monitor the well site environment, thus preventing downhole accidents. The system uses the wireless ZigBee technology as the transmission mode, and combines the virtual instrument technology to design the upper machine interface. The test results show that the system can monitor the outdoor environment in real time. When the environmental parameters exceed the set value, the corresponding location of the LabVIEW interface will send an alarm.
KeywordsWell Site Environmental MonitoringWireless Communication TechnologyZigBeeData AcquisitionRouterCoordinatorthe Upper MachineLabVIEW
Zhang, X. (2014) Design of Oilfield Environment Data Acquisition Software Based on LabVIEW. Inner Mongolia University, Hohhot, 5, 1-2.
Chen, F. (2009) Research on Wireless Sensor Network in Coal Mine Based on ZigBee. Anhui University of Science and Technology, Huainan, 6, 6-8.
Dong, P. (2013) Research on Wireless Network and Reliability Based on ZigBee. Huazhong Normal University, Wuhan, 5, 31-38.
Xu, Z. and Chen, Z. (2014) Design of Real Time Environment Monitoring System Based on CC2530. Journal of Jinling Institute of Technology, 30, 2-5.
Liu, C., Min, X., Xue, J. and Cai, Y. (2015) Environment Monitoring System Based on Wireless Sensor. Computer Applications and Software, 32, 2-6.
Le, K.T. (2004) Designing a ZigBee-Ready IEEE 802. 15. 4-Compliant Radio Transceiver. RF Design Bulletin.
Ge, L., Li, J., Hu, Z. and Zhao, W. (2011) Design of High Precision Weighing System Based on Virtual Technology. Manufacturing Automation, No. 20, 154-156.
Li, W.Z. and Duan, C. (2007) Introduction and Practice of ZigBee Wireless Network Technology. Beihang University Press, Beijing.
Wu, S. (2011) Design and Implementation of Environmental Temperature Monitoring System Based on Wireless Sensor Network. Henan Polytechnic University, Jiaozuo, 12, 30-34 .
Ge, L., Hu, Z. and Chen, P. (2013) Design of Drilling Parameter Testing System for Underground Engineering. Sensors and Microsystems, No. 8, 105-107.
Song, H. and Brandt-Pearce, M. (2013) Model-Centric Nonlinear Equalizer for Coherent Long-Haul Fiber-Optic Communication Systems. 2013 IEEE Global Communications Conference (GLOBECOM), Atlanta, GA, 9-13 December 2013, 2394-2399. https://doi.org/10.1109/GLOCOM.2013.6831432
Wei, W. and Qi, Y. (2011) Information Potential Fields Navigation in Wireless Ad-Hoc Sensor Networks. Sensors, 11, 4794-4807. https://doi.org/10.3390/s110504794
Wei, W., Xu, Q., Wang, L., et al. (2014) GI/Geom/1 Queue Based on Communication Model for Mesh Networks. International Journal of Communication Systems, 27, 3013-3029.
Asorey-Cacheda, R., García-Sánchez, A.J., García-Sánchez, F., García-Haro, J. and González-Castano, F.J. (2013) On Maximizing the Lifetime of Wireless Sensor Networks by Optimally Assigning Energy Supplies. Sensors, 13, 10219-10244. https://doi.org/10.3390/s130810219
Hou, Y.T., Shi, Y. and Sherali, H.D. (2005) On Energy Provisioning and Relay Node Placement for Wireless Sensor Networks. IEEE Transactions on Wireless Communications, 4, 2579-2590. https://doi.org/10.1109/TWC.2005.853969
Chang, J. and Tassiulas, L. (2004) Maximum Lifetime Routing in Wireless Sensor Networks. IEEE/ACM Transaction on Networking, 12, 609-619. https://doi.org/10.1109/TNET.2004.833122
Luz, Y.M. and Wong, V. (2007) An Energy-Efficient Multipath Routing Protocol for Wireless Sensor Networks. International Journal of Communication Systems, 20, 747-766. https://doi.org/10.1002/dac.843
Guney, E., Aras, N., Altinel, K. and Ersoy, C. (2010) Efficient Integer Programming Formulations for Optimum Sink Location and Routing in Heterogeneous WSN. Computer Networks, 54, 1805-1822.
Nivas, T. and Zaruba, G. (2007) Upper Bound of Sensor Network Lifetime: A Flow Optimization Approach. Proceedings of the ACM GHCCWC.
Rossi, A., Singh, A. and Sevaux, M. (2010) Generation de colonnes dans le reseaux de capteurs sans fil. Proceedings of ROADEF.
Attarde, S.A., Ragha, L.L. and Dhamal, S.K. (2010) An Enhanced Spanning Tree Topology for Wireless Sensor Networks. International Journal of Computer Applications, 1, 46-51.
Ergen, S. and Varaiya, P. (2010) TDMA Scheduling Algorithms for WSN. Wireless Networks, 16, 985-997. https://doi.org/10.1007/s11276-009-0183-0
Jayalakshmi, R., Baranidharan, B. and Santhi, B. (2014) Attribute Based Spanning Tree Construction for Data Aggregation in Heterogeneous Wireless Sensor Networks. Indian Journal of Science and Technology, 7, 76-79.
Lachowski, R., Pellenz, M.E., Penna, M.C., Jamhour, E. and Souza, R.D. (2015) An Efficient Distributed Algorithm for Constructing Spanning Trees in Wireless Sensor Networks. Sensors, 15, 1518-1536. https://doi.org/10.3390/s150101518
Khan, G., Bathla, G. and Ali, W. (2011) Minimum Spanning Tree Based Routing Strategy for Homogeneous WSN. International Journal on Cloud Computing: Services and Architecture, 1, 22-29.
Vashist, R. and Dutt, S. (2014) Minimum Spanning Tree based Improved Routing Protocol for Heterogeneous Wireless Sensor Network. International Journal of Computer Applications, 103, 29-33. https://doi.org/10.5120/18047-8945
Saha, S. and McLauchlan, L. (2015) An Approach to Construct Weighted Minimum Spanning Tree in Wireless Sensor Networks. In: Lee, R., Ed., Software Engineering, Artificial Intelligence, Networking and Parallel/Distributed Computing, Vol. 569, Springer International Publishing, Cham, 69-84. https://doi.org/10.1007/978-3-319-10389-1_6
Vijay, U. and Gupta, N. (2013) Clustering in WSN Based on Minimum Spanning Tree Using Divide and Conquer Approach. International Journal of Computer, Electrical, Automation, Control and Information Engineering, 7, 926-930.
Saravanan, M. and Madheswaran, M. (2014) A Hybrid Optimized Weighted Minimum Spanning Tree for the Shortest Intrapath Selection in Wireless Sensor Network. Mathematical Problems in Engineering, 2014, Article ID: 713427. https://doi.org/10.1155/2014/713427
Suto, K., Nishiyama, H., Kato, N. and Huang, C.W. (2015) An Energy-Efficient and Delay-Aware Wireless Computing System for Industrial Wireless Sensor Networks. IEEE Access, 3, 1026-1035. https://doi.org/10.1109/ACCESS.2015.2443171