A Mathematical Model for Managing the Distribution of Information Flows for MPLS-TE Networks under Critical Conditions
- 1 Philadelphia University, Amman, Jordan
- 2 Philadelphia University, Amman, Jordan
- 3 Philadelphia University, Amman, Jordan
- 4 Communication Department, Modern University of Technology and Information, Cairo, Egypt
- 5 Karazin Kharkiv National University, Kharkiv, Ukraine
- 6 Karazin Kharkiv National University, Kharkiv, Ukraine
- 7 The Kharkiv National Technical University of Agriculture Named after Petro Vasylenko, Kharkiv, Ukraine
Abstract
The optimal load distribution over a set of independent paths for Multi-Protocol Label Switching for Traffic Engineering (MPLS-TE) networks is regarded as important issue; accordingly, this paper has developed a mathematical method of optimal procedures for choosing the shortest path. As a criterion for choosing the number of paths, a composite criterion is used that takes into account several parameters such as total path capacity and maximum path delay. The mathematical analysis of using the developed method is carried out, and the simulation results show that there are a limited number of the most significant routes that can maximize the composite quality of service indicator, which depends on the network connectivity and the amount of the traffic. The developed technological proposals allow increasing the utilization factor of the network by 20%.
- Attar, H. (2017) Multipath Routing Mathematical Model to Solve the Traffic Engineering in Multi-Protocol Label Switching Network. Journal of Computer and Communications, 5, 113-122. https://doi.org/10.4236/jcc.2017.514009
- Alhihi, M., Khosravi, M.R., Attar, H. and Samour, M. (2017) Determining the Optimum Number of Paths for Realization of Multi path Routing in MPLS TE Networks. Telkomnika, 15, 1701-1709.
- Alhihi, M., et al. (2017) Researching Impact of Parameters of the Developed Routing Models on Network Performance. Studies in Engineering and Technology, 4, 61-69. http://redfame.com/journal/index.php/set/article/view/2470 https://doi.org/10.11114/set.v4i1.2470
- Alhihi, M. (2017) Method of Distribution Network Resources after Restoration, the Networks MPLS-TE Use of Various Telecommunications Technologies to Construct Backbone Networks. International Journal of Communications, Network and System Sciences, 10, 251-260. https://doi.org/10.4236/ijcns.2017.1011015
- Alhihi, M. (2017) Comparative Analysis of Various Routing Strategies in the Framework of the Proposed Models. International Journal of Innovative Research in Computer and Communication Engineering, 5, 10439.
- Alhihi, M. (2017) Setting an Optimization Problem of Distributing Traffic Across Multiple Independent Paths. Transactions on Networks and Communications, 5, 40. http://www.scholarpublishing.org/index.php/TNC/article/view/3346 https://doi.org/10.14738/tnc.54.3346
- Alhihi, M. (2017) Practical Routing Protocol Models to Improve Network Performance and Adequacy. Journal of Computer and Communications, 5, 114-124. https://doi.org/10.4236/jcc.2017.56007
- Alwayn, V. (2004) Advanced MPLS Design and Implementation: Translated from English, M. “Williams” Publishing House, Chicago, 480 p.
- El-Hihi, M. and Attar, H., Solyman, A. and Stankovic, L. (2016) Network Coding Cooperation Performance Analysis in Wireless Network over a lossy Channel, M Users and a Destination Scenario. Communications and Network, 8, 257-280. https://doi.org/10.4236/cn.2016.84023
- Attar, H. (2017) Data Combination over Physical Layer Using Network Coding with PUM Turbo Codes. Journal of Computer and Communications, 5, 32-44. https://doi.org/10.4236/jcc.2017.56002
- Attar, H., Stankovic, L. and Stankovic, V. (2009) Physical-Layer NC Based on PUM Turbo Codes. IEEE Mosharaka International Conference on Communications, Signals and Coding, Amman, 6-8 February 2009.