Research ArticleOpen AccessGoogle Scholar indexed
High-Frequency Heating for Soldering in Electronics
Electronic Technique and Technology Department, Belarus State University of Informatics and Radioelectronics, Minsk, Belarus
- 1 Electronic Technique and Technology Department, Belarus State University of Informatics and Radioelectronics, Minsk, Belarus
Copy link · social · email
Abstract
Processes of high-frequency (HF) heating are examined and its parameters for the soldering of electronic modules are optimized. The advantages of HF heating are the following: selectivity by skin-effect; high density of energy; process- ing in any environment, including vacuum or inert gas; high ecological cleanliness, improvement solder flowing by electrodynamics forces increase the quality of soldering connections. Investigation of HF electromagnetic heating has allowed to optimize heating speed in local zones of soldering connections formation and to improve their quality due to joint action of superficial effects and electromagnetic forces.
KeywordsHF HeatingInductorSolderingElectronic Modules
- S. Lupi, Ed., “Induction Heating. Industrial Applications,” U.I.E., Paris, 1992, p. 142.
- S. Zinn and S. L. Semiatin, “Elements of Induction Heating: Design, Control, and Application,” ASM International, 1988, p. 335.
- M. Li, H. Xu, S.-W. R. Lee, J. Kim and D. Kim, “Eddy Current Induced Heating for the Soldering Reflow of Area Array Packages,” IEEE Transactions on Advanced Packaging, Vol. 2, No. 31, 2008, pp. 399-403. doi:10.1109/TADVP.2008.923385
- E. Rapoport and Y. Pleshivseva, “Optimal Control of Induction Heating Processes,” CRS Press, New York, 2007.
- V. L. Lanin, “Efficiency of Heating by Concentrated Flow of Energy in the Process of Soldering in Electronics,” Electronnaya Obrabotka Materialov, No. 2, 2002. pp. 1720.
- V. L. Lanin. “High Frequency Electro-Magnetic Heating in Electronic Systems Soldering Processing,” Electronnaya Obrabotka Materialov, No. 5, 2004. pp. 79-84.
- V. L. Lanin. “Modeling of HF Electro-Magnetic Heating during the Soldering of Electronic Devices,” News of the Belarus Engineering Academy, Vol. 2, No. 14, 2002, pp. 167-168.
- V. L. Lanin, A. P. Dostanko and E. V. Telesh, “Formation of Current-Carrying Connections in Electronics Products,” Minsk, Publication Center of the BSU, 2007, p. 574.