A New Design Technique of CMOS Current Feed Back Operational Amplifier (CFOA)
- 1 Department of Electrical Engineering, College of Engineering, Babylon University, Babylon, Iraq
Abstract
A new design technique employing CMOS Current Feedback Operational Amplifier (CFOA) is presented. This design approach appl ies CFA OTA as input stage cascaded with class AB cross-coupled buffer stage. The performance parameters of CMOS CFOA such as bandwidth, slew rate, settling time are extensively improved compared with conventional CFOA. These parameters are very important in high frequency applications that use CMOS CFOA as an active building block such as A/D converters, and active filters. Also the DC input offset voltage and harmonic distortion (HD) are very low values compared with the conventional CMOS CFOA are obtained. P-Spice simulation results using 0.35 μm MI - ETEC CMOS process parameters shows considerable improvement over existing CMOS CFOA simulated model. Some of the performance parameters for example are DC gain of 67.2 dB, open-loop gain bandwidth product of 104 MHz, slew rate (SR+) of +91.3 V/μS, THD of - 67 dB and DC input offset voltage of - 0.2 mV.
- A. H. Madian, S. A. Mahmoud and A. M. Soliman, “Configurable Analog Block Based on CFOA and Its Application,” WSEAS Transactions on Electronics, Vol. 5, No. 6, 2008, pp. 220-225.
- S. Pennisi, “High-Performance CMOS Current Feedback Operational Amplifier,” IEEE International Symposium on Circuits and Systems, Vol. 2, 2005, pp. 1573-1576.
- H. L. Chao and D. S. Ma, “CMOS Variable-Gain Wide-Bandwidth CMFB-Free Differential Current Feedback Amplifier for Ultrasound Diagnostic Applications,” IEEE International Symposium on Circuits and Systems, Island of Kos, 21-24 May 2006, pp. 649-652.
- G. Giustolisi, G. Palmisano, G. Palumbo and S. Pennisi, “High-Drive CMOS Current-Feedback Opamp,” IEEE International Symposium on Circuits and Systems, Sacramento, 3-6 August 1997, pp. 229-232.
- J. Mahattanakul and C. Toumazou, “A Theoretical Study of the Stability of High Frequency Current Feedback Op-Amp Integrators,” IEEE Transactions on Circuits and Systems, Vol. 43, No.1, 1996, pp. 1-12.
- G. Di Cataldo, A. D. Grasso and S. Pennisi, “Two CMOS Current Feedback Operational Amplifiers,” IEEE Transactions on Circuits and Systems, Vol. 54, No. 11, 2007, pp. 1-5.
- A. Assi, M. Sawan and J. Zhu, “An Offset Compensated and High-Gain CMOS Current-Feedback Op-Amp,” IEEE Transaction on Circuits and Systems, Vol. 45, No. 1, 1998. pp. 85-90. doi:10.1109/81.660763
- A. M. Ismail and A. M. Soliman, “Novel CMOS Current Feedback Op-Amp Realization Suitable for High Frequency Applications,” IEEE Transaction on Circuits and Systems, Vol. 47, No. 6, 2000, pp. 918-921. doi:10.1109/81.852946
- S. Selvanayagam and F. J. Lidgey, “Wide Bandwidth CMOS Current Feedback Op-Amp for Inverting Applications,” IEEE Electronics Letters Journal, London, 10 May 1996, pp. 1-4.
- J. Y. Zhu, M. Sawan and K. Arabi, “An Offset Compensated CMOS Current-Feedback Operational Amplifier,” IEEE International Symposium on Circuits and Systems, Seattle, 30 April-3 May1995, pp. 1552-1555.
- G. Palumbo and S. Pennisi, “Current-Feedback Amplifiers versus Voltage Operational Amplifiers,” IEEE Transaction on Circuits and Systems, Vol. 48, No. 5, 2001, pp. 617-623. doi:10.1109/81.922465
- M. Djebbi, A. Assi and M. Sawan, “An Offset-Compensated Wide-Bandwidth CMOS Current-Feedback Operational Amplifier,” IEEE International Symposium on Circuits and Systems, Vol. 1, 2003, pp. 73-76.