Research ArticleOpen AccessGoogle Scholar indexed
SIMO Transadmittance Mode Active-C Universal Filter
- 1
- 2
Circuits and Systems·Volume 01 (2010)·Pages 54–58·Published 26 October 2010·DOI10.4236/cs.2010.12009
Copy link · social · email
Abstract
This paper presents two transadmittance mode universal filters having single voltage input and multiple current outputs. The filter employs three multiple output current controlled conveyors (MOCCCII) and two grounded capacitors. It can realize low pass, high pass, band pass, notch and all pass responses. As desired, the input voltage signal is inserted at high impedance input terminal and the output currents are obtained at high impedance output terminals and hence eases cascadability. The filter enjoys low sensitivity performance and low component spread; and exhibits electronic and orthogonal tunability of filter parameters via bias currents of MOCCCII. SPICE simulation results confirm the workability of the proposed structure.
KeywordsUniversal FilterTransadmittance ModeCurrent Controlled Conveyor
- G. Ferri and N. C. Guerrini, “Low-Voltage Low-Power CMOS Current Conveyors,” Kluwer Academic Publishers, London, 2003.
- N. A. Shah, M. F. Rather and S. Z. Iqbal, “Multifunction Mixed Mode Filter Using FTFN,” Analog Integrated Circuits and Signal Processing, Vol. 47, No. 3, 2006, pp. 339-343.
- A. Fabre, O. Saaid, F. Wiest and C. Boucheron, “High Frequency Applications Based on a New Current Controlled Conveyor,” IEEE Transactions on Circuits Systems-I, Vol. 43, No. 2, 1996, pp. 82-91.
- N. Pandey, S. K. Paul and S. B. Jain, “A New Electronically Tunable Current Mode Universal Filter Using MO- CCCII,” Analog Integrated Circuits and Signal Processing, Vol. 58, No. 2, 2009, pp. 171-178.
- S. Ozoguz, A. Toker and O. Cicekoglu, “New Current- Mode Universal Filters Using Only CCII + s,” Microelectronics Journal, Vol. 30, No. 3, 1999, pp. 255-258.
- W. Tangsrirat, “Current Tunable Current Mode Multifunction Filter Based on Dual Output Current Controlled Conveyors,” AEU International Journal of Electronics and Communications, Vol. 61, No. 8, 2007, pp. 528-533.
- J. W. Horng, C. L. Hou, C. M. Chang and W. Y. Chung, “Voltage Mode Universal Biquadratic Filters with One Input and Five Outputs,” Analog Integrated Circuits and Signal Processing, Vol. 47, No. 1, 2006, pp. 73-83.
- O. Cicekoglu and H. Kuntman, “A New Four Terminal Floating Nullor Base Single-Input Three-Output Current- Mode Multifunction Filter,” Microelectronics Journal, Vol. 30, No. 2, 1999, pp. 115-118.
- D. R. Bhaskar, V. K. Sharma, M. Monis and S. M. I. Rizvi, “New Current Mode Universal Biquad Filter,” Microelectronics Journal, Vol. 30, No. 9, 1999, pp. 837-839.
- A. Fabre and M. Alami, “Universal Current Mode Biquad Implemented from Two Second Generation Current Conveyors,” IEEE Transactions on Circuits Systems-I, Vol. 42, No. 7, 1995, pp. 383-385.
- A. Fabre, F. Dayoub, L. Duruisseau and M. Kamoun, “High Input Impedance Insensitive Second-Order Filters Implemented from Current Conveyors,” IEEE Transactions on Circuits Systems-I, Vol. 41, No. 12, 1994, pp. 918-921.
- I. A. Khan and M. H. Zaidi, “Multifunction Translinear-C Current Mode Filter,” International Journal of Electronics, Vol. 87, No. 6, 2000, pp. 1047-1051.
- S. Maheshwari and I. A. Khan, “Novel Cascadable Current-Mode Translinear-C Universal Filter,” Active and Passive Electronic Components, Vol. 27, No. 4, 2004, pp. 215-218.