Millimeter Wave Ring Oscillator Using Carbon Nano-Tube Field Effect Transistor in 150 GHz and Beyond
- 1 School of Electrical and Computer Engineering, Tarbiat Modares University (TMU), Tehran, Iran
- 2 School of Electrical and Computer Engineering, Tarbiat Modares University (TMU), Tehran, Iran
Abstract
Carbon Nano-Tube Field Effect Transistors (CNTFETS) are the competitor of the conventional MOSFET technology due to their higher current drive capability, ballistic transport, lesser power delay product, higher thermal stability, and so on. Based on these promising properties of CNTFETs, a CNTFET-based millimeter wave ring oscillator operating around 150 GHz and beyond is introduced here in 32 nm technology node. To prevent overestimation, the CNT inter connects between transistors are also included in simulation, which are assumed to be a single layer of ballistic metallic CNTs in parallel. For the sake of simplicity in RF design, the oscillator is based on CNTFET-based inverters. The in verters with DC gain of 87.5 dB are achieved by proper design with the non-loaded delay around 0.6 ps, which is at least one order of magnitude better than the same 32 nm MOSFET-based inverters. The oscillator’s average power consumption is as low as 40 μW with the fundamental harmonic amplitude of around – 6.5 dB. These values are, based on our knowledge, for the first time reported in the literature in CNTFET-based oscillator designs. Also, on the average, the performance of the designed oscillator is 5 - 6 times better than MOSFET-based designs.
- P. Avouris, “Carbon Nanotube Electronics,” Elsevier Chemical Physics, Vol. 281, 2002, pp. 429-445.
- D. Fathi and B. Forouzandeh, “A Novel Approach for Stability Analysis in Carbon Nanotube Interconnects,” IEEE Electron Device Letters, Vol. 30, No. 5, 2009, pp. 475-477. doi:10.1109/LED.2009.2017388
- P. J. Bruke, “AC Performance of Nanoelectronics: Towards a Ballistic THz Nanotube Transistor,” Elsevier So lid-State Electronics, Vol. 48, 2004, pp. 1981-1986.
- L. Nougaret, et al., “80 GHz Field-Effect Transistors Produced Using High Purity Semiconducting Single-Walled Carbon Nanotubes,” Applied Physics Letters, Vol. 94, No. 24, 2009, Article ID: 243505. doi:10.1063/1.3155212
- A. Javey, et al., “Self-Aligned Ballistic Molecular Transistors and Electrically Parallel Nanotube Arrays,” Nano Letters, Vol. 4, No. 7, 2004, pp. 1319-1322. doi:10.1021/nl049222b
- T. Durkop, “Extraordinary Mobility in Semiconducting Carbon Nanotubes,” Nano Letters, Vol. 4, No, 1, 2003, pp. 35-39.
- P. E. Roche, et al., “Very Low Shot Noise in Carbon Nanotubes,” The European Physics Journal B, Vol. 28, No. 2, 2002, pp. 217-22. doi:10.1140/epjb/e2002-00223-9
- L. C. Castro, et al., “Extrapolated fmax for Carbon Nano tube Field-Effect Transistors,” IOP Nanotechnology, Vol. 17, No. 1, 2005, pp. 300-304. doi:10.1088/0957-4484/17/1/051
- J. E. Baumgardner, et al., “Inherent Linearity in Carbon Nanotube Filed-Effect Transistors,” Applied Physics Letters, Vol. 91, 2007.
- S. Fregonese, et al., “Computationally Efficient Physics Based Compact CNTFET Model for Circuit Design,” IEEE Transactions on Electron Devices, Vol. 55, No. 6, 2008, pp. 1317-1327. doi:10.1109/TED.2008.922494
- X. Yang, et al., “Modeling and Performance Investigation of the Double-Gate Carbon-Gate Nanotube Transistor,” IEEE Electron Devices Letters, Vol. 32, No. 3, 2011, pp. 231-233. doi:10.1109/LED.2010.2095826
- J. Deng, et al., “A Compact SPICE Model for Carbon Nanotube Field-Effect Transistors Including Nonidealities and Its Application-Part I: Model of the Intrinsic Channel Region,” IEEE Transactions on Electron Devices, Vol. 54, No. 12, 2007, pp. 3186-3194. doi:10.1109/TED.2007.909030
- J. Deng, et al., “A Compact SPICE Model for Carbon Nanotube Field-Effect Transistors Including Nonidealities and Its Application-Part II: Full Device Model and Circuit Performance Benchmarking,” IEEE Transactions on Electron Devices, Vol. 54, No. 12, 2007, pp. 3195-3205. doi:10.1109/TED.2007.909043