Design and Digital Implementation of Controller for PMSM Using Extended Kalman Filter
- 1 Department of Electrical and Computer Engineering, Prairie View A&M University, Prairie View, USA
- 2 Department of Electrical and Computer Engineering, Prairie View A&M University, Prairie View, USA
- 3 Department of Electrical and Computer Engineering, Prairie View A&M University, Prairie View, USA
- 4 Department of Electrical and Computer Engineering, Prairie View A&M University, Prairie View, USA
Abstract
A novel digital implementation of speed controller for a Permanent Magnet Synchronous Motor (PMSM) with disturbance rejection using conventional observer combined with Extended Kalman Filter (EKF) is proposed. First, the EKF is constructed to achieve a precise estimation of the speed and current from the noisy measurement. Second, a proportional integral derivative (PID) controller is developed based on Linear Quadratic Regulator (LQR) to achieve speed command tracking performance. Then, an observer is designed and its error is utilized to provide load disturbance compensation. The proposed method greatly enhances the PMSM performance by reducing the control signal variation as well as the disturbance. The speed control performance is significantly improved compared to the case when we have an observer acting alone. The simulation results for the speed response and variation of the states when the PMSM is subjected to the load disturbance are presented. The results verify the effectiveness of the proposed method.
- S. Srikanth, B. Ranganaik and M. Srinivas Rao, “Spacevector PWM Techniques and High Temperature Super Conducting PMSM Machines with Multilevel Inverter,” Proceedings of IEEE-International Conference on Advances in Engineering, Science and Management (ICAESM), Nagapattinam, 30-31 March 2012, pp. 522-527.
- Y. Luo, Y. Q. Chen, H.-S. Ahn and Y. Pi, “Dynamic High Order Periodic Adaptive Learning Compensator for Cogging Effect in Permanent Magnet Synchronous Motor Servo System,” IET Control Theory & Applications, Vol. 5, No. 5, 2011, pp. 669-0680. http://dx.doi.org/10.1049/iet-cta.2009.0544
- Y. A.-R. I. Mohamed, “Design and Implementation of a Robust Current-Control Scheme for a PMSM Vector Drive with a Simple Adaptive Disturbance Observer,” IEEE Transactions on Industrial Electronics, Vol. 54, No. 4, 2007, pp. 1981-1988. http://dx.doi.org/10.1109/TIE.2007.895074
- N. Mohan and Electric Drives, “An Integrative Approach,” MNPERE, Minneapolis, 2000.
- P. Pillay and R. Krishnan, “Application Characteristics of Permanent Magnet Synchronous and Brushless DC Motors for Servo Drives,” IEEE Transactions on Industry Applications, Vol. 27, No.5, 1991, pp. 986-996. http://dx.doi.org/10.1109/28.90357
- N. Mohan, “Advanced Electric Drives, Analysis, Control and Modeling Using Simulink,” MNPERE, Minneapolis, 2001.
- L. S. Shieh, H. M. Dib and S. Ganesan, “Linear Quadratic Regulators with Eigenvalue Placement in a Specified Region,” Automatica, Vol. 24, No. 6, 1988, pp. 819-823. http://dx.doi.org/10.1016/0005-1098(88)90058-1
- Y. P. Zhang, C. M. Akujuobi, W. H. Ali, C. L. Tolliver and S. Leang-san, “Load Disturbance Resistance Speed Controller Design for PMSM,” IEEE Transaction on Industrial Electronics, Vol. 53, No. 4, 2006, pp. 1198-1208. http://dx.doi.org/10.1109/TIE.2006.878313
- F. Benchabane, A. Titaouine, O. Bennis, K. Yahia and D. Taibi, “Systematic Fuzzy Sliding Mode Approach with Extended Kalman Filter for Permanent-Magnet Synchronous Motor,” Proceedings of the IEEE international conference on Systems Man and Cybernetics (SMC), 2010, pp. 2169-2174.
- S. Bolognani, S. Calligaro and R. Petrella, “Sensorless Control of IPM Motors in the Low-Speed Range and at Standstill by HF Injection and DFT Processing,” IEEE Transactions on Industry Applications, Vol. 47, 2011, pp. 96-104.
- J. lee, J. Hon and K. Nam, “Sensorless Control of Surface-Mount Permanent-Magnet Synchronous Motors Based on a Nonlinear Observer,” IEEE Transactions on Power Electronics, Vol. 25, No. 2, 2010, pp. 290-297. http://dx.doi.org/10.1109/TPEL.2009.2025276