Research ArticleOpen AccessGoogle Scholar indexed
New Electronically-Controllable Lossless Synthetic Floating Inductance Circuit Using Single VDCC
Department of Electronics and Communication Engineering, Faculty of Engineering and Technology, Jamia Millia Islamia, New Delhi, India
Department of Electronics and Communication Engineering, Maharaja Agrasen Institute of Technology, Rohini, New Delhi, India
- 1 Department of Electronics and Communication Engineering, Faculty of Engineering and Technology, Jamia Millia Islamia, New Delhi, India
- 2 Department of Electronics and Communication Engineering, Maharaja Agrasen Institute of Technology, Rohini, New Delhi, India
Circuits and Systems·Volume 05 (2014)·Pages 13–17·Published 10 January 2014·DOI10.4236/cs.2014.51003
Copy link · social · email
Abstract
A new electronically-controllable lossless floating inductance (FI) circuit (without any matching condition) has been presented, which employs only one Voltage Differencing Current Conveyor (VDCC), one grounded capaci tor and one grounded resistor. The main aim of the paper is to present a new floating inductance simulator using single active device with minimum passive components. The proposed floating inductance simulator can be elec tronically controllable by changing the bias current. The workability of the new presented FI circuit has been verified using SPICE simulation with TSMC CMOS 0.18 μm process parameters.
KeywordsVDCCFloating Inductance SimulationFilters
- A. Antoniou, “Gyrators Using Operational Amplifiers,” IEEE Electronics Letters (UK), Vol. 3, No. 8, 1967, pp. 350-352.
- A. Antoniou, “Realisation of Gyrators Using Op-Amps and Their Use in RC Active Network Synthesis,” Proceedings of the IEEE, Vol. 116, 1969, pp. 1838-1850.
- R. Senani, “New Single-Capacitor Simulations of Floating Inductors,” Electrocomponent Science and Technology, Vol. 10, No. 1, 1982, pp. 7-10. http://dx.doi.org/10.1155/APEC.10.7
- R. Senani, “Realization of Single Resistance-Controlled Lossless Floating Inductance,” IEEE Electronics Letters (UK), Vol. 14, No. 25, 1978, pp. 828-829.
- R. Senani, “Three Op-Amp Floating Immittance Simulators: A Retrospection,” IEEE Transactions on Circuits and Systems II, Vol. 36, No. 11, 1989, pp. 1463-1465.
- R. Senani, “New Tunable Synthetic Floating Inductors,” IEEE Electronics Letters (UK), Vol. 16, No. 10, 1980, pp. 382-383.
- K. Pal, “Novel Floating Inductance Using Current Conveyors,” IEEE Electronics Letters (UK), Vol. 17, No. 18, 1981, p. 638.
- V. Singh, “Active RC Single-Resistance-Controlled Lossless Floating Inductance Simulation Using Single Grounded Capacitor,” IEEE Electronics Letters (UK), Vol. 17, No. 24, 1981, pp. 920-921.
- R. Senani, “Novel Lossless Synthetic Floating Inductor Employing a Grounded Capacitor,” IEEE Electronics Letters (UK), Vol. 18, No. 10, 1982, pp. 413-414.
- W. Kiranon and P. Pawarangkoon, “Floating Inductance Simulation Based on Current Conveyors,” IEEE Electronics Letters (UK), Vol. 33, 1997, pp. 1748-1749.
- P. V. Anand Mohan, “Grounded Capacitor Based Grounded and Floating Inductance Simulation Using Current Conveyors,” IEEE Electronics Letters (UK), Vol. 34, No. 11, 1998, pp. 1037-1038.
- H. Sedef, and C. Acar, “A New Floating Inductor Circuit Using Differential Voltage Current Conveyors,” Frequenz: Journal of RF-Engineering and Telecommunications (Germany), Vol. 54, 2000, pp. 123-125.
- O. Cicekoglu, “Active Simulation of Grounded Inductors with CCII+s and Grounded Passive Elements,” International Journal of Electronics, Vol. 85, No. 4, 1998, pp. 455-462. http://dx.doi.org/10.1080/002072198134003
- A. Fabre, “Gyrator Implementation from Commercially Available Trans Impedance Operational Amplifiers,” IEEE Electronics Letters (UK), Vol. 28, No. 3, 1992, pp. 263264.