Voltage Controlled Ring Oscillator Design with Novel 3 Transistors XNOR/XOR Gates
- 1
- 2
- 3
Abstract
In present work, improved designs for voltage controlled ring oscillators (VCO) using three transistors XNOR/XOR gates have been presented. Supply voltage has been varied from [1.8 - 1.2] V in proposed designs. In first method, the VCO design using three XNOR delay cells shows frequency variation of [1.900 - 0.964] GHz with [279.429 - 16.515] µW power consumption variation. VCO designed with five XNOR delay cells shows frequency variation of [1.152 - 0.575] GHz with varying power consumption of [465.715 - 27.526] µW. In the second method VCO having three XOR stages shows frequency variation [1.9176 - 1.029] GHz with power consumption variation from [296.393 - 19.051] µW. A five stage XOR based VCO design shows frequency variation [1.049 - 0.565] GHz with power consumption variation from [493.989 - 31.753] µW. Simulations have been performed by using SPICE based on TSMC 0.18µm CMOS technology. Power consumption and output frequency range of proposed VCOs have been compared with earlier reported circuits and proposed circuit’s shows improved performance.
- S. Y. Lee and J. Y. Hsieh, “Analysis and Implementation of a 0.9 V Voltage-Controlled Oscillator with Low Phase Noise and Low Power Dissipation,” IEEE Transactions on Circuits and Systems II, Vol. 55, No. 7, July 2008, pp. 624-627. doi:10.1109/TCSII.2008.921574
- J. Craninckx and M. S. J. Steyaert, “A 1.8-GHz CMOS Low-Phase-Noise Voltage-Controlled Oscillator with Prescaler,” IEEE Journal of Solid-state Circuits, Vol. 30, No. 12, December 1995, pp. 1474-1482. doi:10.1109/4.482195
- B. Catli and M. M. Haskell, “A 0.5 V 3.6/5.2 GHz CMO-S Multi-Band VCO for Ultra Low-Voltage Wireless Applications,” IEEE International Symposium on Circuits and Systems, Seattle, 18-21 May 2008, pp. 996-999.
- T. Cao, D. T. Wisland, T. S. Lande and F. Moradi, “Low-Voltage, Low-Power, and Wide-Tuning Range VCO for Frequency ?∑ Modulator,” IEEE Conference on NORCHIP, Tallinn, 16-17 November 2008, pp.79-84.
- L. S. Paula, S. Banpi, E. Fabris and A. A. Susin, “A Wide Band CMOS Differential Voltage-Controlled Ring Oscillators,” Proceeding of 21st Symposium on Integrated Circuits and System Design, Gramado, 1-4 September 2008, pp. 85-89.
- A. P. Chandrakasan, S. Sheng and R. W. Brodersen, “Low-Power CMOS Digital Design,” IEEE Journal of Solid-State Circuits, Vol. 27, No. 4, April 1992, pp. 473-484. doi:10.1109/4.126534
- K. Roy and S. C. Prasad, “Low Power CMOS Circuit Design,” Wiely Pvt. Ltd., New Delhi, 2002.
- H.-R. Kim, et al., “A Very Low-Power Quadrature VCO with Back-Gate Coupling,” IEEE Journal of Solid-State Circuits, Vol. 39, No. 6, June 2004, pp. 952-955. doi:10.1109/JSSC.2004.827798
- M. J. Deen, et al., “Performance Characteristics of an Ultra-Low Power VCO,” Proceedings of the 2003 International Symposium on Circuits and Systems, Hamilton, 25-28 May 2003, pp. 697-700.
- T. W. Li, B. Ye and J. G. Jiang, “0.5 V 1.3 GHz Voltage Controlled Ring Oscillator,” IEEE International Conference on ASIC, Changsha, 20-23 October 2009, pp. 1181-1184.
- S. K. Enam and A. A. Abidi, “A 300 MHz CMOS Voltage Controlled Ring Oscillator,” IEEE Journal of Solid State Circuits, Vol. 25, No. 1, 1990, pp. 312-315. doi:10.1109/4.50320
- B. Fahs, W. Y. Ali-Ahmad and P. Gamand, “A Two Stage Ring Oscillator in 0.13 um CMOS for UMB Impulse Radio,” IEEE Transaction on Microwave Technology, Vol. 57, No. 5, May 2009, pp. 1074-1082. doi:10.1109/TMTT.2009.2017246