Research ArticleOpen AccessGoogle Scholar indexed
An Improved Non-isolated LED Converter with Power Factor Correction and Average Current Mode Control
- 1
- 2
- 3
- 4
Copy link · social · email
Abstract
A new type of high power LED drivers is proposed by adopting an improved two-stages non-isolated configuration. In order to improve power factor and achieve accurate average current control under universal input voltages ranging from 100 Vrms to 240 Vrms, the power factor correction and average current mode control methods operating in continuous current conduction mode are designed and implemented. With the LUMILEDS emitter type LEDs, a laboratory prototype is built and measured. And from the measured results, it could be concluded that the proposed driver has many better performances such as high power factor, low current harmonic, accurate average current control and switch protection.
KeywordsHigh Power LEDPower Factor CorrectionAverage Current Mode Control
- J. Y. Tsao, “Solid-State Lighting: Lamps, Chips and Materials for Tomorrow,” IEEE Circuits Devices Magazine, Vol. 20, No. 3, 2004, pp. 28-37. doi:10.1109/MCD.2004.1304539
- T. Komine and M. Nakagawa, “Fundamental Analysis for Visible-Light Communication System Using LED Lights,” IEEE Transactions on Consumer Electronics, Vol. 50, No. 1, 2004, pp. 100-107. doi:10.1109/TCE.2004.1277847
- R. Mehta, D. Deshpande, K. Kulkarni, S. Sharma and D. Divan, “LEDs—A Competitive Solution for General Lighting Applications,” IEEE Energy 2008, Atlanta, 17-18 November 2008, pp. 1-5. doi:10.1109/ENERGY.2008.4781063
- “Electromagnetic Compatibility (EMC), Part 3-2: Limits—Limits for Harmonic Current Emissions (Equipment Input Current ≤ 16 A per Phase),” International Standard IEC 61000-3-2, 2001.
- Energy Star Program Requirements for Solid State Lighting Luminaries. USA, 2007.
- J. P. Noon, “Designing High-Power Factor Off-Line Power Supplies,” Proceedings of Unitrode Power Supply Design Seminar Manual SEM1500, Texas Instruments, August 2003, pp. 2-6.
- C. K. Tse, “Circuit Theory of Power Factor Correction in Switching Converters,” International Journal of Circuit Theory and Applications, Vol. 31, No. 2, 2003, pp. 157-198.
- H. van der Broeck, G. Sauerlander and M. Wendt, “Power Driver Topologies and Control Schemes for LEDs,” IEEE Applied Power Electronics Conference, Anaheim, 25 February-1 March 2007, pp. 1319-1325.
- G. Spiazzi and J. P. Pomilio, “Interaction between EMI Filter and Power Factor Pre-regulators with Average Current Control: Analysis and Design Considerations,” IEEE Transactions on Industrial Electronics, Vol. 46, No. 3, 1999, pp. 577-584. doi:10.1109/41.767065
- M. Ogata and T. Nishi, “Gragh-Theoretical Approach to 2-Switch DC-DC Converters,” International Journal of Circuit Theory and Applications, Vol. 33, No. 2, 2005, pp. 161-173. doi:10.1002/cta.311
- A. Lazaro, A. Barrado, M. Sanz, V. Salas and E. Olias, “New Power Correction AC-DC Converter with Reduced Storage Capacitor Voltage,” IEEE Transactions on Industrial Electronics, Vol. 54, No. 1, 2007, pp. 384-397. doi:10.1109/TIE.2006.888795
- B. Sharifipour, J. S. Hung, P. Liao, L. Huber and M. M. Jovanovic, “Manufacturing and Cost Analysis of Power-Factor-Correction Circuits,” IEEE Applied Power Electronics Conference and Exposition, Anaheim, 15-19 February 1998, pp.490-494. doi:10.1109/APEC.1998.647734