Design and Comparison of Controller for the Reduction of Conducted Electromagnetic Interference in an Inverter
- 1 Department of Electrical and Electronics Engineering, Kings College of Engineering, Thanjavur, India
- 2 Department of Electrical and Electronics Engineering, Government College of Technology, Coimbatore, India
Abstract
This paper presents the design of a controller for the measurement and reduction of conducted Electro Magnetic Interference (EMI) caused in the power electronic circuits. The conducted EMI is also separating the Common Mode (CM) and Differential Mode (DM) simultaneously using Line Impedance Stabilization Network (LISN). EMI is mitigated by the fuzzy controller. By comparing common mode voltage with the standard reference value, the generated error can be minimized by using fuzzy controller. Fuzzy controller is varying the PWM signal of the power electronic switching devices for reducing the electromagnetic interference. In this paper, comparison of PI and fuzzy controller of the open loop and closed loop models are implemented using MATLAB <sup> ® </sup> SIMULINK for measurement and reduction of the EMI level; and also simulation results of the PI controller and fuzzy controller analysis are presented in this paper. The fuzzy controller is provided to achieve the EMI level of the inverter within the standard limit.
- Zhong, E. and Lipo, T.A. (1995) Improvements in EMC Performance of Inverter-Fed Motor Drives. IEEE Transactions on Industry Applications, 31, 1247-1256. http://dx.doi.org/10.1109/28.475694
- Kumar, M. and Agarwal, V. (2006) Power Line Filter Design for Conducted Electromagnetic Interference Using Time Domain Measurements. IEEE Transactions on Electromagnetic Compatibility, 48, 178-186. http://dx.doi.org/10.1109/TEMC.2006.870697
- Paramesh, J. and Von Jouanne, A. (2001) Use of Sigma-Delta Modulation to Control EMI from Switch-Mode Power Supplies. IEEE Transactions on Industrial Electronics, 48, 111-117. http://dx.doi.org/10.1109/41.904570
- Son, Y.C. and Sul, S.K. (2003) Generalization of Active Filters for EMI Reduction and Harmonics Compensation. Industry Applications Conference, 2, 1209-1214.
- Bera, R., Bera, J., Sen, A.K. and Dasgupta, P.R. (1999) Reduction of EMI from SMPS (Switched Mode Power Supplies) by Resonance Technique and Its Utilities in Industrial Process Control Instruments. International Conference on Electromagnetic Interference and Compatibility, New Delhi, 6-8 December 1999, 445-448.
- Yoshida, K., Ishii, T. and Nagagata, N. (1992) Zero Voltage Switching Approach for Flyback Converter. International Telecommunications Energy Conference, 4-8 October 1992, 324-329. http://dx.doi.org/10.1109/intlec.1992.268424
- Morgan, D. (1994) A Handbook for EMC Testing and Measurement. Peter Peregrinus Ltd., London.
- Paul, C.R. and Hardin, K.B. (1988) Diagnosis and Reduction of Conducted Noise Emissions. IEEE Transactions on Electromagnetic Compatibility, 30, 553-560. http://dx.doi.org/10.1109/15.8769
- Wang, S., Lee, F.C. and Odendaal, W.G. (2005) Characterization Evaluation, and Design of Noise Separator for Conducted EMI Noise Diagnosis. IEEE Transactions on Power Electronics, 20, 974-982. http://dx.doi.org/10.1109/TPEL.2005.850978
- Sakulhirirak, D., Tarateeraseth, V., Khanngern, W. and Yoothanom, N. (2008) A New Simultaneous Conducted Electromagnetic Interference Measuring and Testing Device. Asia-Pacific Symposium on Electromagnetic Compatibility & 19th International Zurich on Electromagnetic Compatibility, 19-23 May 2008, 606-609.