In orthopaedic surgeries, permanent magnet DC motors are used to drill the bone and fix the screws. The Motor drive employs an inner current and outer speed control loop with a conventional or modern controller. To enhance the performance of the drive, this paper proposes a Brain Emotional Logic Based Intelligent Controller based chopper drive. The proposed drive scheme has been simulated using Matlab/Simulink and physically realized for validation. A comparative analysis has been made between the conventional PI controller based drive and the proposed system in order to prove that the proposed scheme has an edge over the traditional PI controller scheme counterpart.
KeywordsBELBICChopper DrivePMDC MotorOrthopedic SurgeriesOsteosynthesisPI ControllerSteady State and Transient State Responses
Allotta, B., Belmonte, F., Dario, P. and Rinalidi, L. (1996) The Control of Penetration in a Mechatronic Drill for Orthopedic Surgery. Proceedings of Multi-Conference on Computational Engineering in Systems Applications—Robotics and Cybernetics, Lille, 222-227.
Allotta, B., Giacalone, G. and Rinalidi, L. (1997) A Hand-Held Drilling Tool for Orthopedic Surgery. IEEE/ASME Transaction on Mechatronics, 2, 218-229. http://dx.doi.org/10.1109/3516.653046
Baker, D., Brett, P.N., Griffiths, M.V. and Reyes, L. (1996) A Mechatronic Drilling for Ear Surgery: A Case Study of Some Design Characteristics. Mechatronics, 6, 461-477. http://dx.doi.org/10.1016/0957-4158(96)00006-2
Baker, D., Brett, P.N., Griffiths, M.V. and Reyes, L. (1996) Surgical Requirements for the Stapedotomy Tool: Data and Safety Considerations. Proceedings of the 18th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, Amsterdam, 31 October-3 November 1996, 214-215.
Matthews, L.S. and Hirsch, C. (1972) Temperatures Measured in Human Cortical Bone When Drilling. Journal of Bone and Joint Surgery, 54, 297-308.
Lavelle, C. and Wedgwood, D. (1980) Effect of Internal Irrigation on Frictional Heat Generated from Bone Drilling. Journal of Oral Surgery, 3, 499-503.
Eriksson, A.R. and Albrektsson, T. (1984) Heat Caused by Drilling Cortical Bone. Temperature Measured in Vivo in Patients and Animals. Acta Orthopaedica Scandinavica, 55, 629-631. http://dx.doi.org/10.3109/17453678408992410
Eriksson, R.A. and Albrektsson, T. (1984) The Effect of Heat on Bone Regeneration: An Experimental Study in the Rabbit Using the Bone Growth Chamber. Journal of Oral & Maxillofacial Surgery, 42, 705-711. http://dx.doi.org/10.1016/0278-2391(84)90417-8
Abouzgia, M.B. and Symington, J.M. (1996) Effect of Drill Speed on Bone Temperature. International Journal of Oral & Maxillofacial Surgery, 25, 394-399. http://dx.doi.org/10.1016/S0901-5027(06)80040-8
Natali, C., Ingle, P. and Dowell, J. (1996) Orthopedic Bone Drills—Can They Be Improved? Temperature Changes near the Drilling Face. Journal of Bone and Joint Surgery, 78-B, 357-362.
Toews, A.R., Bailey, J.V., Townsend, H.G. and Barber, S.M. (1999) Effect of Feed Rate and Drill Speed on Temperatures in Equine Cortical Bone. American Journal of Veterinary Research, 60, 942-944.
Bachus, K.N., Rondina, M.T. and Hutchinson, D.T. (2000) The Effects of Drilling Force on Cortical Temperatures and Their Duration: An in Vitro Study. Medical Engineering & Physics, 22, 685-691. http://dx.doi.org/10.1016/S1350-4533(01)00016-9
Bertollo, N. and Walsh, W.R. (2011) Drilling of Bone: Practicality, Limitations and Complications Associated with Surgical Drill-Bits. Biomechanics in Applications, 53-83.
Hillery, M.T. and Shuaib, I. (1999) Temperature Effects in the Drilling of Human and Bovine Bone. Journal of Materials Processing Technology, Elseveir, 92-93, 302-308.
Tsai, M.-D., Hsieh, M.-S. and Tsai, C.-H. (2007) Bone Drilling Haptic Interaction for Orthopedic Surgical Simulator. ELSEVIER—Computers in Biology and Medicine, 3, 1709-1718.
Boiadjiev, T., Vitkov, V., Delchev, K., Zagurski, K., Chavdarov, I., Kastelov, R. and Boiadjiev, G. (2007) Robotized Module for Bone Drilling in Surgery: Experimental Setup and Results. Edition of Scientific Machine Union, 6, 7-12.
Thomas, R., Bouazza-Marouf, K. and Taylor, G.J.S. (2008) Automated Surgical Screwdriver: Automated Screw Placement. Proceedings of the Institution of Mechanical Engineers, 222, 451-454. http://dx.doi.org/10.1243/09544119jeim375
Murugananth, G. and Vijayan Dr., S. (2015) Development of Fuzzy Controlled Chopper Drive for Permanent Magnet DC Motor. Journal of Vibration and Control, 21, 555-562. http://dx.doi.org/10.1177/1077546313490184
Murugananth, G., Vijayan, S. and Muthukrishnan, S. (2015) Experimental Validation of Fuzzy-Tuned AWPI Controller-Based Chpper Driven PMDC Motor. Journal of Testing and Evaluation, 43, 1383-1394. http://dx.doi.org/10.1520/JTE20130284
Murugananth, G., Vijayan, S. and Muthukrishnan, S. (2013) Analysis of Various Anti-Windup Schemes Used to Control PMDC Motors Used in Orthopedic Surgical Simulators. Life Science Journal, 10, 226-230.
Lucas, C., Shahmirzadi, D. and Sheikholeslami, N. (2004) Introducing BELBIC: Brain Emotional Learning Based Intelligent Controller. Intelligent Automation and Soft Computing, 10, 11-22. http://dx.doi.org/10.1080/10798587.2004.10642862
Moren, J. (2002) Emotion and Learning: A Computational Model of the Amygdala. PhD Thesis, Lund University Cognitive Studies 93, Lund University, Lund.
Jamali, M., Arami, R.A., Hosseini, B., Moshiri, B. and Lucas, C. (2008) Real Time Emotional Control for Anti-Swing and Positioning Control of SIMO Overhead Traveling Crane. International Journal of Innovative Computing, Information and Control, 4, 2333-2344.
Jamali, M.R., Dehyadegari, M., Arami, A., Lucas, C. and Navabi, Z. (2010) Realtime Embedded Emotional Controller. Journal of Neural Computer and Applications, 19, 13-19. http://dx.doi.org/10.1007/s00521-008-0227-x
Rahman, M., Milasi, A.R.M., Lucas, C., Arrabi, B.N. and Radwan, T.S. (2008) Implementation of Emotional Controller for Interior Permanent Magnet Synchronous Motor Drive. IEEE Transactions on Industrial Applications, 44, 1466-1476. http://dx.doi.org/10.1109/TIA.2008.2002206
Jafari, E., Ali, M., Solaymani, S. and Shahgholian, G. (2013) Designing an Emotional Intelligent Controller for IPFC to Improve the Transient Stability Based on Energy Function. Journal of Electrical Engineering Technology, 8, 4788- 4789. http://dx.doi.org/10.5370/JEET.2013.8.3.478
Vijayakumar, T., Muthukrishnan, S. and Murugananth, G. (2016) Genetic Algorithm Based Speed Control of PMDC Motor Using Low Cost PIC 16F877A Microcontroller. Circuits and Systems, 7, 1334-1340. http://dx.doi.org/10.4236/cs.2016.78116