A Novel Trident Incurvature Shape DGS to Suppress Radiated Emission in High Speed Printed Circuit Board
- 1 1Department of Electronics and Communication Engineering, Latha Mathavan Engineering College, Madurai, India
- 2 Department of Electronics and Communication Engineering, Velammal College of Engineering and Technology, Madurai, India
- 3 Department of Electronics and Communication Engineering, Velammal College of Engineering and Technology, Madurai, India
- 4 Department of Electronics and Communication Engineering, Velammal College of Engineering and Technology, Madurai, India
Abstract
As per the entail in wireless communication, the ever increasing switching speeds of digital devices pose significant challenges. Signal quality is more important for high speed products and the signal integrity must ensure reliable transmission where signal integrity is a measure of the quality of an electrical signal. A high speed differential signal will result in signal integrity issues such as crosstalk and radiated emission. One of the solutions to suppress radiated emission is defected ground pattern. This paper introduces a novel trident incurvature shaped defected ground structure to suppress radiated emission that arises in high speed differential signal. The proposed defected ground structure is implemented using Ansoft HFSS simulation tool and its performance is quantified in terms of scattering parameters. The proposed trident incurvature shaped defected ground pattern reduces near end coupling and far end coupling by more than 6 dB and 2 dB respectively. It also provides better return loss and insertion loss in the frequency range 1 - 6 GHz.
- Paul, C. (2006) Introduction to Electromagnetic Compatibility. Wiley-Interscience, New York.
- Ott, H.W. (1988) Noise Reduction Techniques in Electronic Systems. Wiley-Interscience, New York.
- Kim, J., Lee, H. and Kim, J. (2005) Effects on Signal Integrity and Radiated Emission by Split Reference Plane on High-Speed Multilayer Printed Circuit Boards. IEEE Transactions on Advanced Packaging, 28, No. 4.
- Zeng, Z.B., Zhuang, Y.Q., Shen, Z.N., Yao, Y.D. and Xiang, X. (2014) A Novel Simple Wide Band Common-mode Suppression Filter. IEICE Electronics Express, 11, No. 17.
- Chuang, H.-H. and Wu, T.-L. (2010) A Novel Ground Resonator Technique to Reduce Common-Mode Radiation on Slot-Crossing Differential Signals. IEEE Microwave and Wireless Components Letters, 20, 660-662.
- Naser-Moghadasi, M., Alamolhoda, M. and Rahmati, B. (2011) Spurious-Response Suppression in Microstrip Parallel-Coupled Bandpass Filters by Using Defected Microstrip Structures. 1st Annual International Interdisciplinary Conference (AIIC 2013), Azores, Portugal, 24-26 April 2013.
- Chuang, H.-H. and Wu, T.-L. (2011) Suppression of Common-Mode Radiation and Mode Conversion for Slot- Crossing GHz Differential Signals Using Novel Grounded Resonators. IEEE Transactions on Electromagnetic Compatibility, 53, 429-436.
- Mandal, M.K. and Sanyal, S. (2006) A Novel Defected Ground Structure for Planar Circuits. IEEE Microwave and Wireless Components Letters, 16, No. 2.
- Liu, W.-T., Tsai, C.-H., Han, T.-W. and Wu, T.-L. (2008) An Embedded Common-Mode Suppression Filter For GHz Differential Signals Using Periodic Defected. IEEE Microwave and Wireless Components Letters, 18, No. 4.
- Chuang, H.-H. and Wu, T.-L. (2011) Suppression of Common Mode Radiation and Mode Conversion for Slot Crossing GHz Differential Signals Using Novel Grounded Resonators. IEEE Transactions on Electromagnetic Compatibility, 53, No. 2.
- Wu, T.-L., Tsai, C.-H., Wu, T.-L. and Itoh, T. (2009) A Novel Wideband Common-Mode Suppression Filter for Gigahertz Differential Signals Using Coupled Patterned Ground Structure. IEEE Transactions on Microwave Theory and Techniques, 57, 848-855.
- Kim, C.-S., Park, J.-S., Ahn, D. and Lim, J.-B. (2000) A Novel 1-D Periodic Defected Ground Structure for Planar Circuits. IEEE Microwave and Guided Wave Letters, 10, No. 4.
- Ansoft HFSS User’s Guide—High Frequency Structure Simulator. Ansoft, Pittsburgh, PA.