Research ArticleOpen AccessGoogle Scholar indexed
MISO-Type Voltage-Mode Universal Biquadratic Filter Using Single Universal Voltage Conveyor
Department of Electronics and Communication Engineering, Maharaja Agrasen Institute of Technology, New Delhi, India
Electronics and Communication Engineering Cell, Radiance EdutechTM, DDA Market, Delhi, India
- 1 Department of Electronics and Communication Engineering, Maharaja Agrasen Institute of Technology, New Delhi, India
- 2 Electronics and Communication Engineering Cell, Radiance EdutechTM, DDA Market, Delhi, India
Circuits and Systems·Volume 08 (2017)·Pages 227–236·Published 25 September 2017·DOI10.4236/cs.2017.89015
Copy link · social · email
Abstract
A universal biquadratic filter using single universal voltage conveyor (UVC), two resistors and two capacitors is presented in this paper. The proposed structure has three inputs and one output and can realize all the five standard biquadratic filters: low-pass (LP), high-pass (HP), band-pass (BP), band-reject (BR) and all-pass (AP) from the same circuit configuration. The presented universal filter offers low active and passive sensitivities. SPICE (Version 16.5) simulation results using 0.18 μm TSMC technology have been included.
KeywordsUniversal Voltage ConveyorVoltage-ModeFilterAnalog Circuit Design
- Pushkar, K.L., Bhaskar, D.R. and Prasad, D. (2013) Voltage-Mode New Universal Biquad Filter Configuration Using a Single VDIBA. Circuits, Systems, and Signal Processing, 33, 275-285. https://doi.org/10.1007/s00034-013-9625-0
- Prasad, D., Bhaskar, D.R. and Singh, A.K. (2009) Multi-Function Biquad Using Single Current Differencing Transconductance Amplifier. Analog Integrated Circuits and Signal Processing, 61, 309-313. https://doi.org/10.1007/s10470-009-9310-1
- Keskin, A.U. (2006) Multi-Function Biquad Using Single CDBA. Electrical Engineering, 88, 353-356. https://doi.org/10.1007/s00202-004-0289-4
- Bashir, S.A. and Shah, N.A. (2012) Voltage Mode Universal Filter Using Current Differencing Buffered Amplifier as an Active Device. Circuits and Systems, 3, 1-4. https://doi.org/10.4236/cs.2012.33038
- Herencsar, N., Koton, J., Vrba, K. and Cicekoglu, O. (2009) Single UCC-N1B 0520 Device as a Modified CFOA and Its Application to Voltage- and Current-Mode Universal Filters. Applied Electronics, Pilsen, 9, 127-130.
- Shah, N.A., Rather, M.F. and Iqbal, S.Z. (2005) A Novel Voltage-Mode Universal Filter Using A Single CFA. Active and Passive Electronic Devices, 1, 183-188.
- Horng, J.W., Chang, C.K. and Chu, J.M. (2002) Voltage-Mode Universal Biquadratic Filter Using Single Current-Feedback Amplifier. IEICE Transactions on Fundamentals, 85, 1970-1973.
- Singh, G., Prasad, D. and Bhaskar, D. (2015) Single VDVTA-Based Voltage-Mode Biquad Filter. Circuits and Systems, 6, 55-59. https://doi.org/10.4236/cs.2015.63006
- Herencsar, N., Koton, J. and Vrba, K. (2011) KHN-Equivalent Voltage-Mode Filters Using Universal Voltage Conveyors. AEU—International Journal of Electronics and Communications, 65, 154-160. https://doi.org/10.1016/j.aeue.2010.02.005
- Minarcik, M. and Vrba, K. (2007) Continuous-Time Multifunctional Filters with Wide Bandwidth Using Universal Voltage Conveyors. Proceedings of the Sixth International Conference on Networking, Washington, DC, 22-28 April 2007. https://doi.org/10.1109/ICN.2007.32
- Minarcik, M. and Vrba, K. (2006) Low-Output and High-Input Impedance Frequency Filters Using Universal Voltage Conveyor for High-Speed Data Communication Systems. International Conference on Networking, International Conference on Systems and International Conference on Mobile Communications and Learning Technologies, 23-29 April 2006, 155.
- Herencsar, N., Koton, J., Jerabek. J., Vrba, K. and Cicekoglu, O. (2011) Voltage-Mode All Pass Filter Using Universal Voltage Conveyor and MOSFET-Based Electronic Resistors. Radioengineering, 20, 10-18.