Study and Enhanced Design of RF Dual Band Bandpass Filter Validation and Confirmation of Experimental Measurements
- 1
- 2
Abstract
Dual band bandpass filter is designed and optimized for RF wireless applications. The performances of that RF dual band filter are improved especially parameters describing the insertion loss, return losses and rejection. Dual-band bandpass filter using stub loaded resonators is designed and characterized. Theoretical results are compared with experimental data. This comparison shows that the magnitude of reflection coefficient S<sub>11</sub> from ADS<sup>TM</sup> simulation is better than 28.0 dB, and the insertion loss S<sub>21</sub> is less than 0.5 dB. The two rejections are also better than 32.0 dB. The simulated results also show that two central frequencies are located at desired 1.82 and 2.95 GHz. Comparison of measured and simulated results shows frequency drift. The main reason for this frequency shifting is due to some uncertainties. These are obviously due to geometrical and physical parameters H and εr respectively of Duroid substrate used during design and measurements.
- C. Y. Chen, C. Y. Hsu and H. R. Chuong, “Design of Miniature Planar Dual Band Filter Using Dual-Feeding Structures and Embedded Resonators,” IEEE Microwave and Wireless Components Letters, Vol. 16, No. 12, 2006, pp. 669-671. doi:10.1109/LMWC.2006.885621
- S. F. Chang, Y. H. Jeng and J. L. Chen, “Dual-Band Step Im-pedance Band Pass Filter for Multimode Wireless LANs,” Electronic Letters, Vol. 40, No. 1, 2004, pp. 38-39. doi:10.1049/el:20040065
- I. C. Hunter, L. Billonet, B. Jarry and P. Guillon, “Microwave Filters—Applications and Technology,” IEEE Microwave Theory and Techniques Transactions, Vol. 50, No. 3, March 2002, pp. 794-805. doi:10.1109/22.989963
- H. Miyake, S. Kitazawa, T. Ishizaki, T. Ymanda and Y. Nagatomi, “A Miniaturized Monolithic Dual-band Filter Using Ceramic Lamination Technique for Dual Mode Portable Telephones,” IEEE MTT-S International Microwave Symposium Digest, 8-13 June 1997, Vol. 2, pp. 789-792.
- J. T. Kuo, T. H. Yeh and C. Yeh, “Design of Microstrip Bandpass Filters with a Dual Pass Band Response,” IEEE Microwave Theory and Techniques Transactions, Vol. 53, No. 4, April 2005, pp. 1331-1337. doi:10.1109/TMTT.2005.845765
- X. Y. Zhang, J. X. Chen and Q. Xue, “Dual-band Band Pass Filters Using Stub-Loaded Resonators,” IEEE Microwave and Wireless Components Letters, Vol. 17, No. 8, 2007, pp. 583-585. doi:10.1109/LMWC.2007.901768
- A. Balalem, W. Menzel and A. Omar, “Quasi Lumped Open Loop Sus-pended Stripline Bandpass Filters,” 36th European Micro-wave Conference, Manchester, 10-15 September 2006, pp. 568-571.
- A. Balalem, J. Machac and A. Omar, “Dual-band Bandpass Filter by Using Square Loop Dual Mode Resonator,” International Journal of Microwave and Optical Technology, Vol. 50, No. 6, June 2008, pp. 1567-1570. doi:10.1002/mop.23427
- “RT/duroid? 6006/6010LM High Frequency Laminates,” 1998. http://www.rogerscorp.com/documents/612/acm/RT-duroid-6006-6010-laminate-data-sheet
- M. V. Schneider, “Microstrip Lines for Microwave Integrated Circuits,” The Bell System Technical Journal, Vol. 48, No. 5, 1969, pp. 1421-1444.
- H. A. Wheeler, “Transmission Line Properties of a Strip on a Dielectric Sheet on a Plane,” IEEE Microwave Theory and Techniques Transactions, Vol. 25, No. 8, 1977, pp. 631-647. doi:10.1109/TMTT.1977.1129179
- K. C. Gupta, et al., “Computer-Aided Design of Microwave Circuits,” Ar-tech House, Dedham, 1981, pp. 131-134.