Design of Digital to Analog Converters with Arbitrary Radix
- 1 Department of Electrical Engineering, IIT Goa, Farmagudi, India
Abstract
There are DAC structures available in the literature for radix r = 2, 3, and 4; but how they are arrived at is missing. No general structure is available for any radix r. The aim of the paper is, therefore, to fulfil these gaps. To start with, the design relations are derived for the simplest possible attenuator circuit when connected to a voltage source V and a series resistance R, such that the complete circuit offers the Thevenin resistance R. Spread relations for this attenuator are derived. An example when 3 such attenuators with different attenuation constants are connected in cascade is given. Interestingly, the two attenuators with attenuation factors 1/2 and 1/3 have the same spread of 2. A generalized attenuator is then obtained when N number of identical attenuators are connected in cascade. This is modified to derive a digital to analog converter for any radix r.
- Stark, M. (1981) Two-Bits per Cell ROM. COPCON Dig. Papers, 209-212.
- Dao, T.T. (1977) Threshold I2L and Its Application to Binary Symmetric Function and Multivalued Logic. IEEE Journal of Solid-State Circuits, 12, 463-472. https://doi.org/10.1109/JSSC.1977.1050939
- Friedman, N., Salama, C. and Thompson, P. (1977) Realization of Multi-Valued I2L Full Adder. IEEE Journal of Solid-State Circuits, 12, 532-534.
- Current, K.W. and Mow, D.A. (1978) Four-Valued Threshold Logic Full Adder Circuit Implementations. Proceedings of the Eighth International Symposium on Multiple-Valued Logic, Rosemont, 1 April 1978, 95-100.
- Current, K.W. and Mow, D.A. (1979) Implementing Parallel Counters with Four-Valued Threshold Logic. IEEE Transactions on Computers, C-28, 200-204. https://doi.org/10.1109/TC.1979.1675320
- Hallworth, R.P. and Heath, F.G. (1961) Semiconductor Circuits for Ternary Logic. IEEE Monograph, 109C, 219-225.
- Porat, D.I. (1969) Three-Valued Digital Systems. Proceedings of the IEEE, 116, 947-954. https://doi.org/10.1049/piee.1969.0177
- Miyata, T., Tamagawa, K. and Watahiki, T. (1979) Ternary-to-Analog Converters Using Resistor Ladders. Proceedings of the IEEE, 67, 1165-1166. https://doi.org/10.1109/PROC.1979.11414
- Current, K.W. (1982) Quaternary-to-Analog Conversion with Resistive Ladders. Proceedings of the IEEE, 70, 408-409. https://doi.org/10.1109/PROC.1982.12319
- Faruque, S.M., Bhattacharyya, B.B. and Rathore, T.S. (1992) A Switched-Capacitor Based Digital-to-Analog Converter. Journal of the Institution of Engineers, 72, 115-116.
- Faulkner, E.A. (1983) Improved Method of Digital/Analog and Analog/Digital Conversion. Electronics Letters, 19, 896-897. https://doi.org/10.1049/el:19830610
- Rathore, T.S. (1998) Optimized Weighted-Resistor Digital to Analog Converter. IEE Proceedings-Circuits Devices and Systems, 145, 197-200. https://doi.org/10.1049/ip-cds:19981814
- Rathore, T.S. (1999) A Novel Ladder Digital to Analog Converter. IETE Journal of Education, 40, 21-22. https://doi.org/10.1080/09747338.1999.11415691
- Rathore, T.S. and Jain, A. (1998) A New Economical 2R-3R-4R Ladder Digital to analog converter. IETE Technical Review, 15, 289-290. https://doi.org/10.1080/02564602.1998.11416761
- Rathore, T.S. and Jain, A. (1998) Abundance of Ladder Digital to Analog Converters. IEEE Transactions on Instrumentation and Measurement, IM-50, 1445-1449.