New Current Mode Lossy Integrator Employing CDDITA
- 1 Department of Electronics and Communication Engineering, Faculty of Engineering and Technology, Jamia Millia Islamia, New Delhi, India
- 2 Department of Electronics and Communication Engineering, Faculty of Engineering and Technology, Jamia Millia Islamia, New Delhi, India
- 3 Department of Electronics and Communication Engineering, NIT, Jamshedpur, India
- 4 Department of Electronics and Communication Engineering, Faculty of Engineering and Technology, Jamia Millia Islamia, New Delhi, India
Abstract
This work presents a novel current-mode (CM) lossless integrator that uses one current differencing differential input transconductance amplifier (CDDITA) and one grounded capacitor. The configuration based on single active element has several advantages from the aspect of monolithic integration, few are: reduced power consumption, chip miniaturization. Employment of grounded capacitor is also beneficial for monolithic integration. Specifying some of the key features of integrator proposed are: 1) purely resistorless, 2) electronically tunable, 3) current output available at the port having high impedance, and 4) excellent performance under non-ideal conditions. So, a resister-less current mode lossy integrator with electronic control employing single CDDITA has been proposed in this paper. The verification of workability of the proposed current mode integrator is well explained by the help of SPICE simulations using TSMC CMOS 0.18 μm technology node.
- Sanyal, S.K., Sarker, U.C. and Nandi, R. (1990) Increased Time-Constant Dual-Input Integrators. IEEE Transactions on Instrumentation and Measurement, 39, 672-673. https://doi.org/10.1109/19.57257
- Abuelmaatti, M.T. (1994) On the Realization of Current-Mode Integrator Using Current Conveyors. Active and Passive Electronic Component, 17, 79-82. https://doi.org/10.1155/1994/64935
- Makris, C.A. and Toumazou, C. (1990) High Frequency, Precision Integrators Using Current Conveyor Compensation Techniques. IEEE International Symposium on Circuits and Systems. https://doi.org/10.1109/ISCAS.1990.112016
- Lee, J.Y. and Tsao, H.W. (1992) True RC Integrators Based on Current Conveyors with Tunable Time Constants Using Active Control and Modified Loop Technique. IEEE Transactions on Instrumentation and Measurement, 41, 709-714. https://doi.org/10.1109/19.177348
- Liu, S.L. and Hwang, Y.S. (1994) Dual-Input Differentiators and Integrators with Tunable Time Constants Using Current Conveyors. IEEE Transactions on Instrumentation and Measurement, 43, 650-654. https://doi.org/10.1109/19.310164
- Sedra, A. and Smith. K.C. (1970) A Second-Generation Current Conveyor and Its Applications. IEEE Transactions on Circuit Theory, 132-134. https://doi.org/10.1109/TCT.1970.1083067
- Minaei, S. (2004) Dual-Input Current-Mode Integrator and Differentiator Using Single DVCC and Grounded Passive Elements. IEEE MELECON, Dubrovnik, 123-126.
- Nandi, R., Das, S., Kar, M. and Das, S. (2010) Active-R Tunable Integrators Using a Current Differencing Buffered Amplifier. International Journal of Electronics, 97, 129-137. https://doi.org/10.1080/00207210903168835
- Venkateswaran, P., Nandi, R. and Das, S. (2012) New Integrators and Differentiators Using a MMCC. Circuits and Systems, 3, 288-294. https://doi.org/10.4236/cs.2012.33040
- Ramola, V. and Mishra, S. (2012) Design of CCCDBA Based Voltage Mode Differentiator and Integrator. Proceedings of the International Conference on Advances in Electronics, Electrical and Computer Science Engineering—EEC, 109-112.
- Yuce, E. (2014) Novel Instrumentation Amplifier and Integrator Circuits Using Single DDCC and Only Grounded Passive Elements. Indian Journal of Pure and Applied Physics, 52, 767-775.
- Biolek, D., Keskin, A.U. and Biolkova, V. (2012) Quadrature Oscillator Using CDTA-Based Integrators. WSEAS Transaction on Electronics, 3, 463-469.