Research ArticleOpen AccessGoogle Scholar indexed
Dynamics of Interaction of a Single Fiber with a Headset of a Sampling Drum
Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
- 1 Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
- 2 Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
- 3 Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
Copy link · social · email
Abstract
The article presents an analysis of the dynamics of interaction of a single fiber with the sampling drum of a headset during pneumomechanical spinning. The regularity is investigated and the equation of the movement of fibers on the surface of the tooth of the sampling drum headset is obtained. It was found that the dependences of the movement of fibers along the tooth at different angles of inclination, the distribution of fiber tension along the arc, and the distribution of fiber speeds in the region of the sampling arc have an increase property. As a result of the analysis of the tension and speed of the fibers, it was found that with the increase in the sampling zone, the tension force and speed of the fiber increase.
KeywordsFibersSamplingAngleFriction ForceFrictionSpeedRadiusFiber Complex
- Roglin, B., Bouzhek, A., Wilfert, M., et al. (1981) Spinning-Free Spinning. Light and Food Industry, 86-121.
- Yuldashev, Zh. (2011) Improving the Quality of Pneumomechanical Yarn Using Multi-Thread Winding of the Headset. Dissertation of the Candidate of Technical Sciences, Tashkent Institute of Textile and Light Industry, Tashkent, Uzbekistan, 52-85.
- Abdukarimovich, M.O., Ibragimovich, A.K. and Sharipjanovich, S.O. (2018) Designing a New Design of a Loading Cylinder for Pneumomechanical Spinning Machines. Engineering, 10, 345-356. https://doi.org/10.4236/eng.2018.106025
- Abbazov, I., Sarimsakov, O., Khodjiev, M. and Mardonov, B. (2018) Waste Produced at Cotton Waste Factories. American Journal ASCIT Communications, 5, 22-28.
- Kholmirzaev, F., Azimov, S., Abdurahimov, K. and Sarimsakov, O. (2019) Investigation of the Loss of Air Pressure in the Pipeline of the Сotton Pneumatic Conveying. Saudi Journal of Engineering and Technology, 4, 23-27.
- Muradov, R., Burnashev, R.Z. and Sarimsakov, O.Sh. (2001) The Dynamic Task of the Interaction of Raw Cotton with the Working Bodies of Processing Machines. Journal of Mechanic Problems, No. 34, 55-58.
- Obidov, A., Akhmedkhodjaev, Kh., Sarimsakov, O. and Holikov, Q. (2018) Investigation of the Properties of Fibrous Cotton Seeds, for Sorting on a Mesh Surface. Engineering, 10, 572-578. https://doi.org/10.4236/eng.2018.109041
- Sarimsakov, O. (2016) The Possibility of Reducing Cotton Consumption in Cotton. American Journal of Science and Technology, 4, 68-72.
- Sarimsakov, O. (2019) Improving the Process of Filing Cotton in Pneumatic Transport and its Transportation by Air. Monography, Namangan, Uzbekistan, p. 252.
- Sarimsakov, O. and Gaybnazarov, E. (2017) About Energy Consumption in Pneumatic Conveying of Raw Cotton. American Journal of Energy and Power Engineering, 3, 26-29.
- Sarimsakov, O., Xusanov, C. and Muradov, R. (2016) The Change in Air Pressure along the Length of the Pipeline Installation for Pneumatic Conveying of Raw Cotton. Journal of Engineering and Technology, 3, 89-92.