A Qualitative Assessment of a Modified Multilevel Converter Topology M2LeC for Lightweight Low-Cost Electric Propulsion
- 1 School of Mathematics, Computer Science and Engineering, University of London, London, UK
- 2 Department of Electronics and Electrical Engineering, Liverpool John Moore University, Liverpool, UK
- 3 School of Mathematics, Computer Science and Engineering, University of London, London, UK
- 4 School of Engineering, University of Nottingham, Nottingham, UK
- 5 School of Engineering, University of Nottingham, Nottingham, UK
Abstract
A Cascade H Bridge (CHB) is evaluated for both electric vehicle motor traction control and off-vehicle charging against the Power ElectronicsUK Automotive Challenge for cost and mass for the year 2035. By combining the power electronics with batteries using low-voltage MOSFET transistors in a series cascade arrangement the cost and mass targets could be met 12 years earlier (in 2023 and 20 times lighter if an application specific integrated circuit (ASIC) is used. A 200 kW peak reference car was used to evaluate cost and mass benefits using four different topologies of power electronics. Vehicle installation is shown to be simplified as only passive cooling is required removing the need for liquid cooling systems and the arrangement is inherently safe; no high voltages are present when the vehicle is stationary. The inherently higher efficiency of CHB increases vehicle range. The converter with integrated batteries can also behave as an integrated on-board battery charger delivering additional off-vehicle benefits by removing the need for costly external chargers.
- Paul Taylor. Power Electronics UK n.d. https://www.power-electronics.org.uk
- Chang, F., Ilina, O., Lienkamp, M. and Voss, L. (2019) Improving the Overall Efficiency of Automotive Inverters Using a Multilevel Converter Composed of Low Voltage Si Mosfets. IEEE Transactions on Power Electronics, 34, 3586-3602. https://doi.org/10.1109/TPEL.2018.2854756
- Mukherjee, N. and Tricoli, P. (2015) A State-of-Charge Equalisation Technique of Super-Capacitor Energy Storage Systems Using Sub-Module DC-DC Converter Control within Modular Multilevel Converter (MMC) for High Speed Traction Drive Applications. 50th International Universities Power Engineering Conference (UPEC), Stoke on Trent, 1-4 September 2015, 1-6. https://doi.org/10.1109/UPEC.2015.7339948
- Quraan, M., Yeo, T. and Tricoli, P. (2016) Design and Control of Modular Multilevel Converters for Battery Electric Vehicles. IEEE Transactions on Power Electronics, 31, 507-517. https://doi.org/10.1109/TPEL.2015.2408435
- Davidson, C.C. and Trainer, D.R. (2011) Innovative Concepts for Hybrid Multi-Level Converters for HVDC Power Transmission. 9th IET International Conference on AC and DC Power Transmission, London, 19-21 October 2010, 1-5. https://doi.org/10.1049/cp.2010.0982
- Tolbert, L.M., Peng, F.Z. and Habetler, T.G. (1999) Multilevel Converters for Large Electric Drives. IEEE Transactions on Industry Applications, 35, 36-44. https://doi.org/10.1109/28.740843
- Tolbert, L.M., Peng, F.Z., Cunnyngham, T. and Chiasson, J.N. (2002) Charge Balance Control Schemes for Cascade Multilevel Converter in Hybrid Electric Vehicles. IEEE Transactions on Industrial Electronics, 49, 1058-1064. https://doi.org/10.1109/TIE.2002.803213
- Chang, F., Zheng, Z. and Li, Y. (2014) PWM Strategy of a Novel Cascaded Multi-Level Converter for Battery Management. 17th International Conference on Electrical Machines and Systems (ICEMS), Hangzhou, 22-25 October 2014, 3208-3212. https://doi.org/10.1109/ICEMS.2014.7014045
- Du, Z., Ozpineci, B., Tolbert, L.M. and Chiasson, J.N. (2009) DC-AC Cascaded H-Bridge Multilevel Boost Inverter with No Inductors for Electric/Hybrid Electric Vehicle Applications. IEEE Transactions on Industry Applications, 45, 963-970. https://doi.org/10.1109/TIA.2009.2018978
- Hohm, D.P. and Ropp, M.E. (2003) Comparative Study of Maximum Power Point Tracking Algorithms. Progress in Photovoltaics: Research and Applications, 11, 47-62. https://doi.org/10.1002/pip.459