Study of an Ultrasonic Probe Installed into a Small Diameter-Pipe Using an Electromagnetic Acoustic Transducer
- 1 Fukuoka Institute of Technology, Fukuoka, Japan
- 2 Fukuoka Institute of Technology, Fukuoka, Japan
- 3 Fukuoka Institute of Technology, Fukuoka, Japan
- 4 Fukuoka Institute of Technology, Fukuoka, Japan
Abstract
Metal pipes having an inner diameter of about 25 mm or less are frequently used as heat exchangers for power plants, gas pipes, and water pipes. However, erosion and corrosion due to long-term use may cause serious accidents, such as steam leaks, resulting in economic loss and environmental pollution. Therefore, inspection of the entire length and thickness before shipping or monitoring during operation are important technologies. However, no inspection technology including the inside of the wall thickness has been developed. The purpose was to develop an ultrasonic probe that can inspect the inner and outer surfaces from the inside of the pipe at the same time. The developed ultrasonic probe is based on an electromagnetic ultrasonic transducer (EMAT) that does not require a couplant and is then easy to install in a pipe. The EMAT for the longitudinal and for the transverse vibration mode guided wave are connected in series in order to take into account the variety of defects. First, the EMAT was successfully developed for each mode. That is, it was conducted by using the magnetostrictive effect for the longitudinal mode type and by using the Lorentz force for the transverse mode type, and evaluated to improve the performance. The reflected signal from a notch defect was then evaluated in the state that each EMAT was connected in series using any artificial defects and found to be able to detect any notches with about 10% depth or about 15% circumferential length.
- Tang, X.J. and Yan, D.C. (1997) Pipeline Leakage Detection Method and Instrument Based on Neural Network. Journal of Peking University, 33, 319-327.
- Fuchs, H.V. and Riehle, R. (1999) Ten Years of Experience with Leak Detection by Acoustic Signal Analysis. Applied Acoustics, 33, 1-19. https://doi.org/10.1016/0003-682X(91)90062-J
- Gao, F.Q. (1998) The Necessity of Pipeline Inspection. Pipeline Technology and Equipment, 14, 40-42.
- Fang, H. (2000) A New Method for Magnetic Leakage Detection of Steel Tubes. Journal of Iron and Steel Research, 12, 50-54.
- Chen, H.B. and Tu, Y.Q. (2000) A Review of Leakage Detection Methods for Oil Pipeline. Pipeline Technology and Equipment, 22, 38-41.
- Rang, Q.F. (2010) Classification of Non-Destructive Testing Methods and Brief Introduction of Their Characteristics. Non-Destructive Testing, 21, 75-80.
- Li, J. and Rose, J.J. (2006) Natural Beam Focusing of Non-Axisymmetric Guided Waves in Large-Diameter Pipes. Ultrasonics, 44, 35-45. https://doi.org/10.1016/j.ultras.2005.07.002
- Thompson, R.B. (1997) Experiments in the Use of Guided Ultrasonic Waves to Scan Structures. Review of Progress in Quantitative NDE, 16, 121-128. https://doi.org/10.1007/978-1-4615-5947-4_16
- Lowe, M.J.S., Alleyne, D.N. and Cawley, P. (1998) Defect Detection in Pipes Using Guided Waves. Ultrasonics, 36, 147-154. https://doi.org/10.1016/S0041-624X(97)00038-3
- Thompson, R.B. (1973) A Model for the Electromagnetic Generation and Detection of Rayleigh and Lamb Wave. IEEE Transaction on Sonics and Ultrasonics, 20, 340-346. https://doi.org/10.1109/T-SU.1973.29770
- Murayama, R. (2002) Latest Trend and Basics of an Electromagnetic Acoustic Transducer Method. Journal of the Japanese Society for Non-destructive Inspection, 51, 62-67. (in Japanese)
- Hirao, M. and Ogi, H. (2003) Coupling Mechanism. In: EMATs for Science and Industry. Springer, Boston, MA, 13-38. https://doi.org/10.1007/978-1-4757-3743-1_2
- Hayashi, T. (2007) Guided Wave Dispersion Curves Derived with a Semi-Analytical Finite Element Method and Its Applications to Nondestructive Inspection. Proceedings of Symposium on Ultrasonic Electronics, 28, 351-352. (in Japanese)
- Ribichini, R., Cegla, F.B., Nagy, P.B. and Cawley, P. (2011) Study and Comparison of Different EMAT Configurations for SH Wave Inspection, IEEE Transaction on Ultrasonics Ferroelectrics and Frequency Control, 58, 2571-2581. https://doi.org/10.1109/TUFFC.2011.2120