Research ArticleOpen AccessGoogle Scholar indexed
Theoretical Features of the Process Cleaning Zone between Sections of Raw Cotton from Weed Impurities
Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
- 1 Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
- 2 Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
- 3 Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
- 4 Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
Copy link · social · email
Abstract
The article proposes to use the Euler equations to describe the motion of a stationary stream in the cleaning zones, which allows us to determine the laws of the distribution of pressure, density and speed along the arc of contact of the moving layer of raw cotton with the surface of the mesh during impact with spikes on the pulp. It was found that the pressure, density and flow velocity along the cleaning arc as a result of the hammer spikes change stepwise with decreasing pressure and density and increasing flow velocity along this arc.
KeywordsFriction ForceCotton MassDry Friction ForceFeed RollersDensityAngular VelocityElement MotionElastic ElementDetail
- (1994) A Guide to the Primary Processing of Cotton. Book 1. Joint Stock Company “Uzbekistan Cotton Industry and Sales”. Tashkent, Mekhnat Publishing House, 75-102.
- Suchkov, V.M. (1987) Forecast Optimization of Technological Characteristics of the Raw Cotton Cleaner from Large Weeds. Dissertation Candidate of Technical Sciences, Tashkent, 48-95.
- Lebedev, D.A., Korabelnikov, A.R. and Korabelnikov, R.V. (2009) Mechanism for Removing Weed Impurities during the Cleaning Process. Izv. Universities, Technology of the Textile Industry, No. 4.
- Lugachev, A.E. (1998) Development of the Theoretical Foundations of Nutrition and Purification of Cotton in Relation to the In-Line Technology of its Processing. Dissertation of the Doctor of Technical Sciences, Tashkent, 56-120.
- Sarimsakov, O., Xusanov, C. and Muradov, R. (2016) The Change in Air Pressure along the Length of the Pipeline Installation for Pneumatic Conveying of Raw Cotton. Journal of Engineering and Technology, 3, 89-92. http://www.aascit.org/journal/et
- Kholmirzaev, F., Azimov, S., Abdurahimov, K. and Sarimsakov, O. (2019) Investigation of the Loss of Air Pressure in the Pipeline of the Cotton Pneumatic Conveying. Saudi Journal of Engineering and Technology, 4, 23-27.
- Rajapova, N., Tursunov, I., Mardonov, B. and Sarimsakov, O. (2020) The Study of the Movement of the Aero Mixture through the Pipeline during Pneumatic Transportation of Cotton. Journal of Advanced Research in Dynamical and Control Systems, 12, 1287-1297. (Scopus) https://doi.org/10.5373/JARDCS/V12SP4/20201605
- Sarimsakov, O. (2016) The Possibility of Reducing Cotton Consumption in Cotton. American Journal of Science and Technology, 4, 68-72.
- Rajapova, N., Tursunov, I., Mardonov, B. and Sarimsakov, O. (2019) The Movement of a Mixture of Cotton with an Air Stream during Pneumatic Transport by Pipeline of Variable Cross Section. Engineering, 11, 531-540. https://doi.org/10.4236/eng.2019.118037
- Sarimsakov, O. and Gaybnazarov, E. (2017) About Energy Consumption in Pneumatic Conveying of Raw Cotton. American Journal of Energy and Power Engineering, 3, 26-29.
- Sevostyanov, A.G. et al. (1989) Mechanical Technology of Textile Materials. Moscow, Publishing House Light Industry, 45-110.
- Obidov, A., Akhmedkhodjaev, Kh., Sarimsakov, O. and Holikov, Q. (2018) Investigation of the Properties of Fibrous Cotton Seeds, for Sorting on a Mesh Surface. Enjineering, 10, 572-578. https://doi.org/10.4236/eng.2018.109041