Eddy Current Losses in Solid Pole Shoes in a Two-Pole Permanent Magnet Motor
- 1 Department of Industrial Economics, Electrical and Mechanical Engineering, University West, Trollhättan, Sweden
- 2 Department of Engineering Sciences, Uppsala University, Uppsala, Sweden
Abstract
The aim of this paper is to present the eddy current losses in solid pole shoes in a permanent magnet two-pole electric motor. In the presented paper, the authors have chosen to work with three different analytical models, Carter’s theory, Gibb’s theory and Lawrenson’s theory, each with different degree of accuracy and simplifications. The results from the analytical models all present relatively low eddy current losses, giving the designer valuable arguments to utilize solid pole shoes, as a rotor with solid poles is from a construction point of view a more suitable choice, increasing the mechanical stability and reducing the production cost, compared to the laminated design.
- Sverige ledande i energiomställning enligt utvärdering av Internationella energibyrån (IEA). https://www.regeringen.se/artiklar/2019/04/sverige-ledande-i-energiomstallning-enligt-utvardering-av-internationella-energibyran-iea/
- Santiago, J., Bernhoff, H., Ekergård, B., Eriksson, S., Apelfröjd, S., Waters, R. and Leijon, M. (2012) Electrical Motor Drivelines in Commercial All Electric Vehicles: A Review. IEEE Transactions on Vehicular Technology, 61, 475-484. https://doi.org/10.1109/TVT.2011.2177873
- Stoll, R.L. (1974) The Analysis of Eddy Currents. Oxford University Press, Oxford.
- Ranlöf, M. and Lundin, U. (2011) On Permeance Modeling of Large Hydrogenerators with Application to Voltage Harmonics Prediction. IEEE Transactions on Energy Conversion, 25, 1179-1186. https://doi.org/10.1109/TEC.2010.2040740
- Holmberg, P., Leijon, M. and Wass, T. (2003) A Wideband Lumped Circuit Model of Eddy Current Losses in a Coil with a Coaxial Insulation System and a Stranded Conductor. IEEE Transactions on Power Delivery, 18, 50-60. https://doi.org/10.1109/TPWRD.2002.803753
- Drubel, O. and Stoll, R.L. (2001) Comparison between Analytical and Numerical Methods of Calculating Tooth Ripple Losses in Salient Pole Synchronous Machines. IEEE Transactions on Energy Conversion, 16, 61-67. https://doi.org/10.1109/60.911405
- Xu, L., Zhao, W., Li, R. and Niu, S. (time) Analysis of Rotor Losses in Permanent Magnet Vernier Machines. IEEE Transactions on Industrial Electronics, 1.
- Wang, Y., Xu, W., Zhang, X. and Ma, W. (2020) Harmonic Analysis of Air Gap Magnetic Field in Flux-Modulation Double-Stator Electrical-Excitation Synchronous Machine. IEEE Transactions on Industrial Electronics, 67, 5302-5312. https://doi.org/10.1109/TIE.2019.2934061
- Caunes, A., Takorabet, N., Chaithongsuk, S. and Duranton, L. (2019) Characterization of Rotor Losses in High Speed Permanent Magnet Synchronous Machines. 19th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, Nancy, 29-31 August 2019, 1-2. https://doi.org/10.1109/ISEF45929.2019.9097096
- Castagnaro, E., Bacco, G. and Bianchi, N. (2018) Rotor Iron Losses in High-Speed Synchronous Reluctance Motors. XIII International Conference on Electrical Machines, Alexandroupoli, 3-6 September 2018, 1310-1316. https://doi.org/10.1109/ICELMACH.2018.8506888
- Bettayeb, A., Kaczmarek, R. and Vannier, J.C. (2010) Analytical Estimation of Rotor Loss due to Stator Slotting of Synchronous PM Machines. International Journal of Electrical, Computer, Energetic, Electronic and Communication Engineering, 4, 915-921.