Research ArticleOpen AccessGoogle Scholar indexed
Determination of Correction Values of Operating Reliability of Assembly Components of the Assembly—Front Spinner Spinning Box (R1 Rieter) on the Basis of Operating Data
Academy of Technical and Educational Vocational Studies, Nis, Serbia
Department of Technology of Products of Textile Industry, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
Department of Technology of Products of Textile Industry, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
- 1 Academy of Technical and Educational Vocational Studies, Nis, Serbia
- 2 Department of Technology of Products of Textile Industry, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
- 3 Department of Technology of Products of Textile Industry, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
Copy link · social · email
Abstract
The optimal safety model includes the values of the operation of the components with the allowed risk, and it is clearly seen that the belt of absolutely safe operation of the analyzed circuit is located between the values of the displayed dependence curves M ξ ( t ) BP = f ( t ) . AND also, analy s es have been carried out to ensure the flawless operation of the OE machine and the consistency of product quality.
KeywordsSurrender BoxOpen-End (OE)ReliabilityExploitationSpinningYarnTension
- Blanchard, B. And Fabrysky, W. (1981) System Engineering and Analysis. Prentice Hall Inc., New Jersey.
- Brehmer, L. (1975) Technishe Diegnostik in der Flugzeuginstandhalting. Information der ziliven Luftfahrt, 11.
- Connor, P.M. (1981) Structured Analysis in Desing Technique. Sistems Analysis and Designa Foundation for the 1980, Norht_Holland, New York.
- Stefanovic, S. (2012) Determination of the Value of Selected Oscillation Frequency Measurement Point Analyzed Parts OE Spinning—On the Box Spinning. International Journal of Mechanical Engineering Research and Development, 2, 27-37.
- Stefanovic, S. (2006) The Influence of Mechanical Vibration on the Occurrence of Functional Safety Circuits in the Power Transmission System of Textile Machines. Ph.D. Thesis, University of Novi Sad, Novi Sad.
- Slobodan, S., et al. (2013) Research into the Causes of Inaccuracies of Components of Complex for Coil Winding with Finished Yern at OE. Journal of Process Management. New Technologies, 1, 16-26.
- Stefanovic, S. (2013) The Analysis of Functioning of Basic Components of OE— Technical System. International Journal of Engineering, 11, 237-244.
- Korabayev, Sh.A., Mardonovich, M. , Lolashbayevich, M. and Xaydarоvich, M. (2019) Determination of the Law of Motion of the Yarn in the Spin Intensifier. Engineering, 11, 300-306. https://doi.org/10.4236/eng.2019.115021 https://www.scirp.org/journal/paperinformation.aspx?paperid=92784
- Korabayev, Sh.A., Matismailov, S.L., Yuldashev, A.T. and Atanbayev D.D. (2020) Study of Fiber Movement Outside the Crater of Pnevmomechanical Spinning Machine. Solid State Technology, 63, 3460-3466. http://www.solidstatetechnology.us/index.php/JSST/article/view/3473
- Dimitrijevic, N., Stefanovic, S., Mladenovic, S. and Vojislav, V. (2019) Use of Intelligent Systems for Electronic Stability of Motor Vehicles. Knowledge International Journal, 35, 961-966.
- Dimitrijevic, N., Stefanovic, S., Mladenovic, S. and Krstic, V. (2019) Use Of Gps Systems for Movement and Monitoring Vehicle in Road Traffic. Knowledge International Journal, 35, 955-960.
- Dimitrijevic, N., Stefanovic, S., Mladenovic, S. and Krstic, V. (2019) Use of Intelligent Systems on the Dynamic Stability of Cars. Knowledge International Journal, 35, 973-978.