Study of the Aerodynamic Process and Its Impact on Cotton Transportation Process through the Cotton Pipeline
- 1 Namangan Institute of Engineering Technology, Namangan, Uzbekistan
- 2 Namangan Institute of Engineering Technology, Namangan, Uzbekistan
Abstract
The article provides a theoretical analysis of the velocity distribution and distribution in the cross section of the pipe during the transportation of cotton. It studied the factors that move air and transport material in a pneumatic pipeline, developed a mathematical model and built graphs. The effect of pressure on the ease of construction of pipes for air transportation of raw cotton and the speed distribution in the process of transporting cotton, as well as the factors that cause pressure loss in the shells of pipes were studied. So, i f the expansion after the air pipe is expanded (5), we will introduce K 1 = 0 and the beating coefficient . If the current narrows before burdening, then we enter K 1 = 1 and the input soften rate from the formula . The air flow is moving upwards below the slope and the longer the pipe is the air flow is so significant (strong). The flow of air is divided into laminar and turbulent streams according to leakage. The procedure for transportation of raw cotton using air will move the turbulent the sidelines, interacts with the layers. If the turbulent passes in a well-round smooth passenger-pipes, the number of critical Reynolds can be delivered to 200,000. The process of transporting cotton in pnevmotransport is far from the laminary regime in far away and stronger mode.
- Jabbarov, G.J. (1987) Preliminary Processing Technology for Chewing Cotton.
- Sarimsakov, O.S. (2017) Dissertation on “Scientific-Based Technology of Transportation of Raw Cotton and Transportation of Air Transport”.
- Davydbaev, X.K. (1974) Isslidovanie I Vyborimalnыx Parametric Bunkera—Nakopitya Dlya Intensification of the Plania Xlopkom-sirTistritional Boutota Djinov I Eurtitelnyx Mash. Diplomat International School, Tashkent, 56 p.
- Khasanov, M.R., Makhkamov, R.G. and Nishanov, A.N. (1992) Zomaniatorrefaction for Poranting Cotton—in Ponevmodnisov with Ginning Systems. Sebbornaka Guchnyx Troud Tashpi, Tashkent, 36-39.
- Hamidov, S.S. (2005) Aerodynamics. Samarkand Publishing House, 27-28.
- Fabrillant, I.Y. (1984) Aerodynamics. Izgotovleniya Nauka, 75-78 p.
- Husanov, S.M. (2014) Improving the Reliability of the Pnevmotransport Device. Institute of Engineering and Technology of the Master of Engineering and Technology.
- Makhkamov, А.M., Khusanov, С.M., Muradov, R.M. and Imomaliyeva, S.F. (2020) The Oretic Observation of the Cotton Movement in the Operating Camera of the New Separator. International Journal of Psychosocial Rehabilitation, 24, 6356-6364. https://doi.org/10.37200/IJPR/V24I5/PR2020619
- Akramjanov, d., Mahkamov, A.U. and Imamalieva, S. (2020) Simulation of the Program Simulation of the Process of Separation of Cotton Raw Cotton. The DGU of IMA DGU 08906 Copyright 10.08.
- Akramjanov, D., Mahkamov, A., Khusanov, S. and Imamalievash, T. (2020) Ima of Imma’s. DGU 09395 Copyright 16.10.
- Abduvahidov, M., Akramjonov, D., Rakhimberdiev, D. and Makhzamov, A. (2019) Isslidovanie Voprasov Analyticheskogo Operedeleniya Parameterov Estware Package Cleans. Universon Texnicheskie Nausi, 4, 16-20. https://doi.org/10.1007/s11298-019-7340-2
- Husanov, S., Makhkamov, A., Muradov, A. and Muradov, R.C. (2019) From the Air Flow under the Influence of the Center’s Refuge. Scientific and Technical Journal at the Namangan Institute of Engineering Technology, 3, 59-64.
- Abduvahidov, M., Makhkamov, A., Siddikov, A. and Kholmirzaev, F. (2018) Isslidovanie Analyticheskogo Opredleleniya Parameters Gestkosti Packet Constructs. International Conference Science and Practice: A Nev Level of Integration in the Modern World, 143-146.
- Pre-Khusanov, N., Khusanov, S., Makhkamov, A. and Muradov, R.R. (2018) Ways to Increase the Efficiency of the Stone Handle Device. NamMti International Conference “During the Period of Innovative Development”, 103-106 p.