Research ArticleOpen AccessGoogle Scholar indexed
Calculation Energy of Efficiency New Ginning Machine
Department of Mechanical Engineering, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
- 1 Department of Mechanical Engineering, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
Copy link · social · email
Abstract
Having studied the schedule of influence and change of static loading depending on angular an arrangement saw cylinders we have defined the general spent electric energy on the single-chamber two-cylinder gin, by performing of the calculation the energy consumption per one saw with respect to the angular arrangement of the saw cylinder. Also, provide energy audits gin, were performed at Uzbekistan Namangan region cotton gins in ten manufactures.
KeywordsSaw CylinderPerformed CalculationCornerLoading DistributionsWear ResistanceEnergy Efficiency
- Armijo, C.B., et al. (2019) How Current Cotton Ginning Practices Affect Fiber Length Uniformity Index. The Journal of Cotton Science, 23, 66-77.
- Mamatovich, A.S. (2013) The Theoretical Research of the Stress Condition of Shaft in the Single-Cylinder and Dualcylinder Single-Chamber Saw Gin. Journal of Material Sciences and Engineering, 2, 4.
- Hughs, S.E., Holt, G.A., Armijo, C.B., Whitelock, D.P. and Valco, T.D. (2020) Development of the Cotton Gin. The Journal of Cotton Science, 24, 34-43.
- Hughs, E., Holt, G., Rutherford, R. and Hughs, E. (2017) Saw Gin Stands. The Journal of Cotton Science, 21, 60-69. http://journal.cotton.org
- Hasani, H., Tabatabaei, S.A. and Amiri, G. (2012) Grey Relational Analysis to Determine the Optimum Process Parameters for Open-End Spinning Yarns. Journal of Engineered Fibers and Fabrics, 7, 81-86. https://doi.org/10.1177/155892501200700212
- Bajracharya, R.M., Bajwa, D.S. and Bajwa, S.G. (2017) Mechanical Properties of Polylactic Acid Composites Reinforced with Cotton Gin Waste and Flax Fibers. Procedia Engineering, 200, 370-376. https://doi.org/10.1016/j.proeng.2017.07.052
- Azizov, S.M. and Axmedhodjaev, X.T. (2016) The Optimal Modeling of an Angular Position of Saw Cylinders in Single-Chamber Two Cylinders Gin. American Journal of Mechanical and Industrial Engineering, 1, 103-106.
- Azizov, S., Ibrohimov, M., Uzoqov, F. and Mirzakarimov, M. (2021) The Modelling and Introductions of New Type Ribs of Lattice of the Two Cylinder of Gin. E3S Web of Conferences, 273, 07020. https://doi.org/10.1051/e3sconf/202127307020
- Sénac, T., Lelevé, A., Moreau, R., Krahenbuhl, L., Sigwalt, F. and Bauer, C. (2019) Simulating a Syringe Behavior Using a Pneumatic Cylinder Haptic Interface. Control Engineering Practice, 90, 231-240. https://doi.org/10.1016/j.conengprac.2019.07.005
- Mamatovich, A.S. and Abdusamat, K. (2011) Definition of Increasing the Fibre Capturing Surface of Saw Teeth of Cotton Ginning Machine through Mathematic Modelling. World Journal of Mechanics, 1, 122-126. https://doi.org/10.4236/wjm.2011.13017
- Baydar, G., Ciliz, N. and Mammadov, A. (2015) Life Cycle Assessment of Cotton Textile Products in Turkey. Resources, Conservation & Recycling, 104, 213-223. https://doi.org/10.1016/j.resconrec.2015.08.007
- Azizov, S., Uzoqov, F., Mirzakarimov, M. and Usmanov, O. (2021) Analysis of Namangan 77 Cotton in Production Line with Different Saw Gins for Short Fiber Yield. E3S Web of Conferences, 273, 07021. https://doi.org/10.1051/e3sconf/202127307021