Research ArticleOpen AccessGoogle Scholar indexed
Calculation of Cost-Effectiveness of Molds Made of Aluminum, MDF (Medium Density Fiberboard) and Steel
Department of Technological Machines and Equipment, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
Department of Technological Machines and Equipment, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
Department of Technological Machines and Equipment, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
Department of Technological Machines and Equipment, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
Department of Technological Machines and Equipment, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
- 1 Department of Technological Machines and Equipment, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
- 2 Department of Technological Machines and Equipment, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
- 3 Department of Technological Machines and Equipment, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
- 4 Department of Technological Machines and Equipment, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
- 5 Department of Technological Machines and Equipment, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
Copy link · social · email
Abstract
We implemented the process of producing a new Rib in three different ways, and we selected the process that was the most affordable and required the least labor, and we did it. This paper also considers the influence of the cost of the form from MDF, Alumina and Steel on the quality of the product.
KeywordsMoldRibAluminumMDF (Medium Density Fibreboard) and Steel MaterialsProductionQuality
- Wang, G.H. and Li, Y.X. (2022) Development of New Ductile Iron with Super-High Thermal Conductivity and Elongation. Journal of Iron and Steel Research International, 29, 462-473. https://doi.org/10.1007/s42243-021-00581-7
- Hassan, M. (2017) Characterization of Face Sheet/Core Debonding Strength in Sandwiched Medium Density Fiberboard. Materials Sciences and Applications, 8, 673-684. https://doi.org/10.4236/msa.2017.89048
- Ning, B., Wu, H.B., Niu, G., et al. (2022) Cold Compression Deformation Method for reducing Residual Stress and Uniformizing Micro-Property in Ferrite Steel. Journal of Iron and Steel Research International, 29, 503-511. https://doi.org/10.1007/s42243-021-00563-9
- Azizov, S.M. and Axmedhodjaev, X.T. (2016) The Optimal Modeling of an Angular Position of Saw Cylinders in Single-Chamber Two Cylinders Gin. American Journal of Mechanical and Industrial Engineering, 1, 103-106. https://doi:10.11648/j.ajmie.20160103.2
- Wang, Y.D., Zhang, L.F., Yang, W., et al. (2022) Effect of Nozzle Type on Fluid Flow, Solidification, and Solute Transport in Mold with Mold Electromagnetic Stirring. Journal of Iron and Steel Research International, 29, 237-246. https://doi.org/10.1007/s42243-021-00577-3
- Azizov, S.M. and Axmedhodjaev, H. (2015) Theoretical Analysis of Gin Cylinder for Simulating Dual Saw Cylinder Chamber Gin for Increasing Wear Proof, Energy Efficient, Saving Resources. World Journal of Engineering and Technology, 3, 91-99.
- Azizov, S., Ibrohimov, M., Uzoqov, F. and Mirzakarimov, M. (2021) The Modelling and Introductions of New Type Ribs of Lattice of the Two Cylinder of Gin. E3S Web of Conferences, 273, Article ID: 07020. https://doi.org/10.1051/e3sconf/202127307020
- Jiang, D.B., Zhang, L.F. and Wang, Y.D. (2022) Effect of Mold Electromagnetic Stirring on Solidification Structure and Solute Segregation in Continuous Casting Bloom. Journal of Iron and Steel Research International, 29, 124-131. https://doi.org/10.1007/s42243-021-00702-2
- Briseno, J. and Casanova-del-Angel, F. (2021) Fracture Mechanics on Aluminum Specimens. World Journal of Mechanics, 11, 237-257. https://doi.org/10.4236/wjm.2021.1112016
- Mamatovich, A.S. and Abdusamat, K. (2011) Definition of Increasing the Fibre Capturing Surface of Saw Teeth of Cotton Ginning Machine through Mathematic Modelling. World Journal of Mechanics, 1, 122-126. https://doi.org/10.4236/wjm.2011.13017
- Azizov, S., Uzoqov, F., Mirzakarimov, M. and Usmanov, O. (2021) Analysis of Namangan 77 Cotton in Production Line with Different Saw Gins for Short Fiber Yield. E3S Web of Conferences, 273, Article ID: 07021. https://doi.org/10.4236/wjm.2011.13017