An Advanced Control Technology Robotic Casting and Glazing for Ceramic Bowls
- 1 Technology Management, Valaya Alongkorn Rajabhat University, Pathumthani, Thailand
- 2 Mechatronics Engineering, Rajamangala University of Technology, Thanyaburi, Thailand
Abstract
Glazes on ceramics provide a durable finish as well as a protective layer, impervious, sanitary, and generally easily cleaned surface, have the advantage of having a very wide spectrum of colors. As a result, color has a lot of variability, luminosity and permanence. This method of coating is suitable for products that are not too big a smooth and can be done quickly such as plating of coffee mugs, cups or bowls. Putting the product in the enameled tank must not be soaked for too long as it will thicken the coating. When the coating is dry it will slip off easily. Therefore, this research is to provide product dipping. Good and consistent plating at all times and then industrial robots are used to help in plating or dipping. The robot can control the work quickly. According to the position and speed control can reduce the working time in the further.
- Ju, H.J., Zhao, Q. and Sun, X. (2007) Microwave Oven Design Using HFSS Simulation Software. Material Review A, 21, 237-239.
- Tian, M.B. (2003) Substrates for High Density Package Engineering. Tsinghua University Press, Beijing, 22-24.
- Wang, W.L., Zhu, F. and Zhu, W.Q. (2006) A Summary of Automation Technology Development for Ceramic Tile Production Line. China Ceramics, 42, 4-7.
- Ding, X.W. (2002) Design and Implementation of an Automatic Ceramic Powder Weighing System. Foshan Ceramics, 12, 25-28.
- Wang, X. and Chen, Y. (2003) Research and Realization of Auto-Distribution Product System of Ceramics Based on USS Protocol. China Ceramic Industry, 10, 23-27.
- Norton, F.H. (1957) Elements of Ceramics. Addison Wesley Publishing Company, INC, Masssachasetts.
- Huang, X., Hoshikawa, T. and Uda, S. (2007) Analysis of the Reaction Atthe Interface between Si Melt and Ba-Doped Silica Glass. Journal of Crystal Growth, 306, 422-427. https://doi.org/10.1016/j.jcrysgro.2007.05.020
- Minami, T., Maeda, S., Higasa, M. and Kashima, K. (2011) In-Situ Observation of Bubble Formation at Silicon Melt-Silica Glass Interface. Journal of Crystal Growth, 318, 196-199. https://doi.org/10.1016/j.jcrysgro.2010.10.075
- Zhang, Q.Z. and Lan, Y. (2009) The Technical Renovation and Simulation of Kiln Temperature Control System. Automation Technology and Its Application, 1, 34-37.
- Jinan, T. (2003) Design of Multilayer Ceramic Package and Its Some Question in the Application. Electronics and Packaging, 3, 28-33.