Study of Optimal Parameters of Improved 1RX Regenerator
- 1 Department of Technological Machines and Equipment, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
- 2 Department of Technological Machines and Equipment, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
Abstract
In this article, researches on improvement of 1RX regenerator used in cleaning processes of cotton ginning enterprises were carried out. The effect of changing the parameters of the new working body —rubber-plate drum and machine inlet on the efficiency of cotton separation was studied in the research, and the maximum level of efficiency of separation was determined. In this paper work, the main factors affecting the efficient operation of the regenerator were identified, their value limits were determined, and research was conducted using the mathematical planning method. As a result, effective operation of the improved 1RX cotton regenerator was observed at the value of the given factors, that is, the separation efficiency was 99.5%, the cleaning efficiency was higher than 88.7%, and the amount of seed cotton in the waste was reduced lower than 2.5%.
- Djamolov, R.K. and Ismailov, U.M. (2021) Improving the Efficiency of Cotton Regeneration Technological Equipment. Proceedings of the International Scientific- Practical Conference “Modern Innovative Technologies in Light Industry: Problems and Solutions”, Bukhara Institute of Engineering and Technology, Bukhara, 19-20 November 2021, 391-396.
- Obidov A.A. and Sultanov, M.M. (2020) To Research the Method of Separating Fibers Suitable for Spinning on a Needle Drum. International Scientific and Practical Conference CUTTING EDGE-SCIENCE, Shawnee, 29-30 June 2020, 128-131.
- Djamalov, R., et al. (2020) Drum for Removing Raw Cotton from Saw Cylinders and Transporting It in Cleaners. Patent FAP 00335 RUz.
- Obidov, A.A. and Sultanov, M.M. (2020) Study of Technological Parameters of Fiber Separation Device. International Journal of Psychosocial Rehabilitation, 24, 6400-6407. https://doi.org/10.37200/IJPR/V24I5/PR2020624
- Borodin, P.N. (1999) Report on Topic 9807, JSC SPC “Paxtasanoatilm”, Tashkent.
- Obidov, A., Mamatqulov, O. and Sultanov, M. (2018) Theoretical Analysis of the Movement of Cotton Piece on the Slope Surface. International Conference “Science and Practice: A New Level of Integration in the Modern World”, Berlin-Warsawa, May 2018, 151-156.
- Vzenkonsky, A.B., Boldinsky, G.I., et al. (1966) Method of Calculating the Number of Slats on the Removable Drums of Raw Cotton Cleaners. Cotton Industry, No. 1, 128-132.
- Obidov, A.A. (2007) Improvement of the Technology of Cleaning and Sorting of Ginned Seeds. Dissertation of Candidate of Technical Sciences, TITLI, Tashkent, 200 p.
- Loginov, B.V. (1961) Investigation of the Process of Removing Raw Cotton from Saw Drums in Heap Cleaners and Raw Cleaners. Ph.D. Thesis, TITLI, Tashkent.
- Avazbek, O., Mirzaolim, S., Ibrohim, M. and Shokir, A. (2018) The Theoretical Studies of the Cultivation of Three Cotton Seeds along the Plain. Engineering, 10, 514-520. https://doi.org/10.4236/eng.2018.108037
- Kuliev, T.M., Dzhamolov, R.K., Nazirov, R.R. and Kurbanbaev, E.B. (2018) Development of a Raw Cotton Regenerator from Raw Cotton Waste. NTO, Topic No. 12, Tashkent.
- “Uzpakhtasanoat” OAJ (1994) Handbook of Primary Processing of Cotton. Book 1. Fan, Tashkent, p. 445.
- Khakimov, Sh.Sh. (2015) On the Development and Implementation of Skimming Slatted Drums in Sections and Cleaners of Raw Cotton. Universum: Engineering Sciences: Electron, No. 11. http://7universum.com/ru/tech/archive/item/2768.