Research ArticleOpen AccessGoogle Scholar indexed
Research on Factors Affecting the Operation of Cotton Cleaning Machine
Namangan State Technical University, Namangan, Uzbekistan
Namangan State Technical University, Namangan, Uzbekistan
- 1 Namangan State Technical University, Namangan, Uzbekistan
- 2 Namangan State Technical University, Namangan, Uzbekistan
Copy link · social · email
Abstract
The article studies the main factors affecting the pile drum of a cotton cleaning device for removing small impurities. As a result of the study, graphs were constructed, and the influence of the pile diameter and the rotation speed of the pile drum on the overall cleaning efficiency was analyzed in the graphs. As a result, it was found that at low values of the drum rotation speed, the cleaning process is not active enough and the efficiency is relatively low, and as the rotation frequency increases, the effect on the cotton mass increases and the probability of separation of small impurities increases. As a result of the study, the optimal values of the main factors affecting the operation of the device were determined.
KeywordsCottonFine ImpuritiesPile DrumPilesRotation FrequencySlope AngleCleaning ZoneImprovementCleaning DeviceRegression Equation
- Zikriyoev, E.Z. and Mekhnat, T. (1999) Primary Processing of Raw Cotton. 84-86.
- Yakubov, B.N. (1995) Improving the Process of Cleaning Raw Cotton from Foreign Impurities in Saw-Tooth Cleaners in Order to Reduce the Loss of Cotton Fiber Mass. TITLP, 156 p.
- Rasulov, R.K. (2008) Justification of the Parameters of the Serrated-Grate System of the Cotton Cleaner for Removing Large Debris. 130 p.
- Obidov, A., Akhmadalieva, D. and Otaqo’ziyev, D. (2024) Development of an Experimental Construction of a Device for Cleaning from Small Piece of Contaminants. Scientific and Technical Journal of Namangan Institute of Engineering and Technology , 9, 202-207.
- Avazbek, O., Dilnoza, K. and Nurillo, K. (2024) Study of Mesh Surface Deformation during Cleaning of Cotton from Fine Impurities. Republican Scientific and Practical Conference on Innovative Methods of Using Energy and Resource-Saving Modern Technologies to Ensure Product Quality Based on International Standards. NamIET 2024, 428-432.
- Kamalov, N.Z. and Makhmatkulov, C.M. (1991) Methods of Optimization of Separation Processes. Dep. in UzNIINTI No . 1442 -Uz , 28 p.
- Buriev, R.A., Jumaniyazov, K.J. and Salimov, A.M. (2016) Determination of Cotton Quality. “Uzpakhtasanoateksport” Holding Company “Cotton Scientific Center” Joint Stock Company, 144 p.
- Sevastyanov, A.G. and Sevastyanov, P.A. (1991) Optimization of Mechanical and Technological Processes in the Textile Industry. Legprombytizdat, 255 p.
- Norboeva, D.V. and Rosulov, R.K. (2019) Researching the Problems of Cotton Decontamination. FarPI Scientific and Technical Journal , 23, 162-165.
- Juraev, A., et al. (2012) The Grate of the Fibrous Material Cleaner. Patent of the Republic of Uzbekistan FAP 00769, N10.