Al-based metal matrix composites [MMCs] have been the research interest of a wide spectrum of material scientists throughout the world for some over two decades now. The present paper has chosen one alloy system namely the 7xxx series and from an extensive literature review concluded that since the beginning of the new millennium nothing note worthy has been added to the knowledge already gained in the last quarter of the last century except confirm the earlier findings that MMCs if properly fabricated by choosing the processing route and with appropriate size and volume fraction of dispersoids can improve most of the mechanical, corrosion and wear resistant properties of the base alloy. The author’s own research activities using this alloy system for making MMCs that include attempts to improve upon the properties by making composites, ageing and also secondary processing have been included. An attempt has been made to establish the stretch to which improvement is possible in the alloy system by making composites and trying all other routes known for meaningful improvement in properties. Further, the way forward for such particulate composites has been drawn to realise the material scientists’ dream of seeing such MMCs as engineering components. For this, the areas which now need research include mass production of composites, focus on its machining, joining, processing as also reduction in the size of dispersoids are some of the areas that have been identified and discussed in the paper.
KeywordsAl-based MMCs7xxx Series7075 AlloyTemperingAgeingRetrogression And ReageingHardnessMechanical PropertiesWear PropertiesExtrusionCorrosionMachining
J. E. Hatch, “Aluminium, Properties, Physical Metallurgy and Phase Diagrams,” American Society for Metals, Metals Park, Ohio, 1971.
I .J. Polmear, “Light Metal Age, Metallurgy of the Light Metals,” Edword Arnold Publishers Ltd, London, 1981, p.69.
I. J. Polmear, “Light Metal Age, Metallurgy of the Light Metals,” Edword Arnold Publishers Ltd, London, 1981, p.73.
L. F. Mondolfo, “Grain Refinement in Aluminum Alloyed with Titanium and Boron,” Metallurgical and Materials Transactions B, Vol. 2, No. 2, 1971, pp. 465- 471.
R. C. Dorward, “Precipitate Coarsening during Overaging of Al-Zn-Mg-Cu Alloy,” Materials Science and Technology, Vol. 15, No. 10, 1999, pp. 1133-1138.
S. Suresh, T. Christman and Y. Sugimurlan, “Accelerated Ageing in Cast Al Alloy-SiC Particulate Composites,” Scripta Metallurgica, Vol. 23, No.9, 1989, pp. 1599-1602.
J. S. Robinson, S. D. Whelena and R. L. Cudd, “Retrogression and Reaging of 7010 Open Die Forgings,” Materials Science and Technology, Vol. 15, No. 6, 1999, pp. 717-724.
A. Deschamps, Y .Brechet and F. Livet, “Influence of Copper Addition on Precipitation Kinetics and Hardening in Al-Zn-Mg alloy,” Materials Science and Technology, Vol. 15, No. 99, 1999, pp. 993-1000.
W. S. Lee, W. C. Sue, C. F. Lin and C. J. Wu, “Effect of Aging on High Strain Rate and High Temperature Properties of 7075 Aluminum Alloy,” Materials Science and Technology, Vol. 15, 1999, pp. 1379-1386.
Yi-Lei Wu, F. H. [Sam] Froes, Chenggong Li and Alex Alvarez, “Microalloying of Sc, Ni and Ce in an Advanced Al-Zn-Mg-Cu Alloy,” Metallurgical and Materials Transactions A, Vol. 30A, No. 4, 1999, pp. 1017- 1024.
K. Ural, “A Study of Optimization of Heat Treatment Conditions in Retrogression and Reaging Treatment of 7075-T6 Al alloy,” Journal of Materials Science Letters, Vol. 13, No. 5, 1994, pp. 383-385.
M. Kanno, I. Araki and Q. Cui, “Precipitation Behavior of 7000 Alloys during Retrogressional and Reaging Treatment,” Materials Science and Technology, Vol. 10, 1994, pp. 599-603.
M. Furukawa, P. B. Berbon, Z. Horita, M. Nemoto, N. K. Tsenev, R. Z. Valiev and T. G. Langdon, “Age Hardening and the Potential for Superplasticity in a Fine Grained Al-Mg-Li-Zr Alloy,” Metallurgical and Materials Transactions A, Vol. 29A, No. 1, 1998, pp. 169- 177.
J. E. Hatch, “Aluminium Properties and Physical Metallurgy,” American Society for Metals, Metals Park, Ohio, 1984, p. 2.
Joining
Mass Production
Y. Huang, F. J. Hummpberys, N. Ridley and Z. C. Wang, “Diffusion Bonding of Hot Rolled 7075 Al alloys,” Materials Science and Technology, Vol. 14, 1998, pp. 405- 410.
J. M. Zhang, M. A. Przystuna and A. J. Luevano, “Characterization of Pore and Constituent Particle Populations in 7050-T7451 Al Plate Alloys,” Metallurgical and Materials Transactions A, Vol. 29A, No. 3, 1998, pp. 727-737.
M. G. Zelin and S. Guillard, “Microstructure and Properties of Superplastically Formed Al Alloy 7475 Pans,” Materials Science and Technology, Vol. 15, 1999, pp. 309-315.
H. Iwasaki, T. Mori, M. Mabuchi and K. Higashi, “Microstructural Evolution and Plastic Stability during Superplastic Flow in A 7475 Aluminum Alloy,” Materials Science and Technology, Vol. 15, 1999, pp. 180-184.
D. N. Hanlon and W. M. Rainforth, “Some Observations on Cyclic Deformation Structures in the High Strength Commercial Aluminum Alloy AA 7150,” Metallurgical and Materials Transactions A, Vol. 29A, No. 11, 1998, pp. 2727-2736.
Y. N. Kwon and Y. W. C. Hang, “The Effect of Grain Size and Temperature on the Superplastic Behavior of a 7075 Al Alloy,” Metallurgical and Materials Transactions A, Vol. 30A, 1999, pp. 2037-2047.
W. S. Miller and F. J. Humphreys, “Fundamental Relationship between Microstructures and Mechanical Properties of Metal Matrix Composites,” Ed. M. N. Gungar, P. K. Liaw, 517.
Nuesbaum, “New Application for Al. Based MMC,” Light Metal Age, Vol. 55, February 1997, p. 54.
R. Asthana, “Reinforced Cast Metals Part I-Solidification Microstructure,” Journal of Material Science, Vol. 33, No. 7, 1998, pp. 1679-1698.
M. S. Zedalis, P. S. Cilman and S. K. Das, “In High Performance Composites for the 1990's,” In: S. D. Das, et. al. Ed., The metallurgy society of AIME, Warrendale PA, 1990, pp. 61-81.
T. J. A. Doel and P. Bowen, “Effect of Particle Size and Matrix Aging Conditions on Toughness of Particle Reinforced Aluminum Based Metal Matrix Composites,” Materials Science and Technology, Vol. 12, No. 7, 1996, pp. 586-594.
E. M. Taleff, G. A. Henshall, T. G. Nieh, D. R. Lesuer and J. Wadsworth, “Warm Temperature Tensile Testing Ductility in Al-Mg Alloys,” Metallurgical and Materials Transactions A, Vol. 29A, No. 13, 1998, pp. 1081-1091.
M. J. Hadianford and Y. W. Mai, “In Situ SEM Studies on the Effect of Particulate Reinforcement on Fatigue Crack Growth Mechanism of Aluminum Based Metal Matrix Composites,” Journal of Materials Science, Vol. 30, No. 21, 1995, pp. 5335-5346.
Y. C. Zhou, Z. P. Duan and Q. B. Yang, “Failure of SiC Particulate Reinforced Metal Matrix composites Induced by Laser Thermal Shock,” Metallurgical and Materials Transactions A, Vol. 29A, No. 2, 1998, pp. 685-692.
O. P. Modi, M. Saxena, B. K. Prasad, A. K. Jha, S. Das and A. H. Yegneswaran, “Role of Alloy Matrix and Dispersoid on Corrosion Behaviour of Cast Al alloy Composite,” Corrosion, Vol. 54, No. 2, 1998, pp. 129- 134.
P. K. Rohatgi, S. Das and R. Asthana, “Science, Technology and Industrial Potential of Cast Metal Ceramic Particle Composites,” in Materials Science and Technology in the future, CSIR, Bhopal, 1985, pp 123-184.
P. K. Rohatgi, R. Asthana and S. Das, “Solidification, Structure and Properties of Cast Metal-ceramic Particle Composites,” International Metals Reviews, Vol. 31, No. 3, 1986, pp. 115-139.
T. S. Srivatsan, “Microstructure, Tensile Properties and Fracture Behaviour of Al2O3 Particulate Reinforced Aluminium Alloy Metal Matrix Composites,” Journal of Materials Science, Vol. 31, No. 5, 1996, pp. 1375-1388.
S. Sriram, C. Daniels and T. S. Srivatsan, “Influence of Al2O3 Particulate Reinforcement on Tensile Fracture of an Aluminium Alloy Metal Matrix Composite,” Meatls Materials and Processes, Vol. 17, No. 3, 1995, pp. 183- 199.
A. M. Gokhale, N. U. Deshpande, D. K. Denzer and J. Liu, “Relationship between Fracture Toughness, Fracture Path, Microstructure of 7050 Aluminium Alloy: Part II. Multiple Micromechanisms-Based Fracture Toughness Model,” Metallurgical and Materials Transactions A, Vol. 29A, No. 4, 1998, pp. 1203-1210.
M. J. Hadianford, J. Healy, Y. W. Mai, “Fracture Characteristics of a Particulate Reinforced Metal Matrix Composite,” Journal of Materials Sciences, Vol. 29, No. 9, 1994, pp. 2321-2327.
T. S. Srivatsan, “Microstructure, Tensile Properties and Fracture Behaviour of Aluminium Alloy 7150,” Journal of Materials Science, Vol. 27, No. 17, 1992, pp. 4772- 4781.
A. M. Murphy, S. J. Howard and T. W. Clyne, “Characterisation of Severity of Particle Clustering and Its effect on Fracture of Particulate Metal matrix composites,” Material Science and Technology, Vol. 14, 1998, pp. 959-968.
A. J. Shakesheff and G. Purdue, “Designing Metal Matrix Composites to Meet Their Target: Particulate Reinforced Al Alloys for Missile Applications,” Material Science and Technology, Vol. 14, 1998, pp. 851-856.
P. D. Pitcher, A. J. Shakesheff and J. D. Lord, “Aluminum Based Metal Matrix Composites for Improved Elevated Temperature Performance,” Material Science and Technology, Vol. 14, 1998, pp. 1015-1023.
C. M. Styles, I. Sinclair, K. Foster and P. J. Gregson, “Work Hardening Effects on SiC Particle Reinforced Aluminum Alloys,” Material Science and Technology, Vol. 14, 1998, pp. 1053-1056.
A. Deschamps, Y. Brechet and F. Livet, “Influence of Copper Addition on Precipitation Kinetics and Hardening in Al-Zn-Mg Alloy,” Materials Science and Technology, Vol. 15, 1999, pp. 993-1000.
W. S. Miller and F. J. Humphreys, “Strengthening Mechanisms in Particulate Metal Matrix Composites,” Scripta Metall, Vol. 25, 1991, pp. 33-38.
D. J. Lloyd, “Aspects of Fracture in Particulate Reinforced Metal Matrix Composites,” Acta Metall, Vol. 39, No. 1, 1991, pp. 59-71.
N. J. Hurd, “Fatigue Performance of Alumina Reinforced Meatal Matrix Composites,” Materials Science and Technology, Vol. 4, 1988, pp. 513-517.
R. P. Wei, C.-M. Liao and M. Gao, “A Transmission Electron Microscopy Study of Constituent-particle- induced Corrosion in 7075-T6 and 2024-T3 Aluminum Alloys,” Metallurgical and Materials Transactions A, Vol. 29A, 1998, pp. 1153-1160.
M. Gao, C. R. Feng and R. P. Wei, “An Analytical Electron Microscopy Study of Constituent Particles in Commercial 7075-T6 and 2024-T3 Alloys,” Metallurgical and Materials Transactions A, Vol. 29A, No. 4, 1998, pp. 1145-1151.
D. J. Lloyd and B. Chamberlin, “In Cast Reinforced Composites,” American Society for Metals, Metals Park, 1988, pp. 263-268.
F. M. Hosking, F. F. Portillo, R. Wunderlin and R. Mehrabian, “Composite of Aluminium Alloys: Fabrication and Wear Behaviour,” Journal of Materials Science, Vol. 17, No. 2, 1982, pp. 477-498.
A. Wang and H. J. Rack “Abrasive Wear of Silicon Carbide Particulate and Whisker Reinforced 7091 Aluminum Matrix composites,” Wear, Vol. 146, No. 2, 1991, pp. 337-348.
S. Turenne, Y. Chatigny, D. Simard, S. Caron and J. Masounave, “The Effect of Abrasive Particle Size on the Slurry Erosion Resistance of Particulate Reinforced Aluminium Alloy,” Wear, Vol. 141, No. 1, 1990, pp. 147-158.
L. H. Chen and D. A. Rigney, “Transfer during Unlubricated Sliding Wear of Selected Metal Systems,” Wear, Vol. 105, No. 1, 1985, pp. 47-61.
R. L. Devis, C. Subramaniam and J. M. Yellup, “Abrasive Wear of Aluminium Composites-A Review,” Wear, Vol. 201, No. 2, 1996, pp. 132-144.
B. Venkataraman and G. Sundararajan, “Corellation between the Characteristics of the Mechanically Mixed Layer and Wear Behaviour of Aluminium, Al-7075 alloy and Al-Metal Matrix Composites,” Wear, Vol. 245, No. 1, 2000, pp. 22-38.
A. K. Mukhopadhyay, “On the Nature of Fe Bearing Particles Influencing Hard Anodizing Behavior of AA7075 Extrusion Products,” Metallurgical And Materials Transactions A, Vol. 29A, 1998, pp. 979-987.
C. M. Styles, “Superplastic Forming Behavior of Complex Shapes and Post Forming Mechanical Properties of Aluminum Based SiCp Reinforced Metal Matrix Composites,” Materials Science and Technology, Vol. 16, 2000, pp. 759-764.
F. A. Mohamed, “On the Creep Strengthening of SiC Particulate in SiC-Al Composites,” Metallurgical and Materials Transactions A, Vol. 28A, No. 12, 1997, pp. 2780-2782.
Y. Li and T. G. Langdon, “An Examination of Creep Data for an Al-Mg Composite,” Metallurgical and Materials Transactions A, Vol. 28, No. 5, 1997, pp. 1271- 1273.
K. T. Park, E. J. Lavernia and F. A. Mohamed, “High Temperature Creep of Silicon Carbide Particulate Reinforced Aluminium,” Acta Metallurgica et Materialia, Vol. 38, No.11, 1990, pp. 2149-2159.
K. B. Lee and H. Kwon, “Strength of Al-Zn-Mg-Cu Matrix Composite Reinforced with SiC Particles,” Metallurgical and Materials Transactions A, Vol. 33A, No. 2, 2002, pp. 455-465.
K. T. Kashyap, C. Ramachandra, C. Dutta and B. Chatterji, “Role of Work Hardening Characteristics of Matrix Alloys in the Strengthening of Metal Matrix Composites,” Bulletin of Materials Science, Vol. 23, No. 1, 2000, pp. 47-49.
Y. L. Cheng, Z. H. Chen, H. L. Wu and H. M. Wang, “The Corrosion Behaviour of the Aluminum Alloy 7075/SiCp Metal Matrix Composite Prepared by Spray Deposition,” Materials and Corrosion, Vol. 58, No. 4, 2007, pp. 280-284.
V. Balasubramanian, J. Senthilkumar, M. Balasubramanian, “Optimization of the Corrosion Behavior of AA7075 Al/SiCP and Al/Al2O3 Composites Fabricated by Powder Metallurgy,” Journal of Reinforced Plastics and Composites, Vol. 27, No. 15, 2008, pp. 1603-1613.
S. Kumar and V. Balasubramanian, “Developing a Mathematical Model to Evaluate Wear Rate of AA7075/ SiCp Powder Metallurgy Composites,” Wear, Vol. 264, No. 11-12, 2008, pp. 1026-1034.
R. K. Bhushan S. Kumar and S. Das, “Optimisation of porosity of 7075 Al Alloy 10% SiC Composite Produced by Stir Casting Process through Taguchi Method,” International Journal of Materials Engineering Innovation, Vol. 1, No. 1, 2009.
H. Takeo, I. Tsunemichi, K. Toshiro and T. Hiroyuki, “High Strain Rate Superplasticity of the SiCp/7075 Aluminum Alloy Composite Made by a Vortex Method,” Keikinzoku, Vol. 51, No. 3, 2001, pp. 169-174.
O. C. Wells, “Interpretation of scanning electron microscope fractographs,” John A Fellows, 8th Edition, Metals Handbook, ASM Committee on Fractography by electron microscopy, ASM, Vol. 9, 1974, pp. 64-67.
O. C. Wells, “Scanning electron microscope fractographs,” John A Fellows, 8th Edition, Metals Handbook, ASM Committee on Fractography by Electron Micros- Copy, ASM, Vol. 9, 1974, pp. 64-78.
O. C. Wells, “Interpretation of scanning electron microscope fractographs,” John A Fellows, 8th Edition, Metals Handbook, ASM Committee on Fractography by Electron Microscopy, ASM, Vol. 9, 1974, pp. 64-78.