In this study, a different issue of mechanical engineering interests is determined for threaded fastened joints. A series of photoelastic experiments were performed to determine the maximum strains for the holes in a tensile flat plate subjected to bolt-nut loads. Pertinent strain distributions were examined to determine the roll of the torques on the bolts in mini mizing the strain; hence stress concentration. The experimental determination of maximum strains is needed as a way to validate future theoretical and numerical results, and provide a valuable aid to their application. The emphasis of this paper is on deformation. The results indicate that strains can decrease significantly with the increase of the bolt's pre-load.
N. T. Younis, “Bolt Preload Effects on Stresses around Circular Holes,” Proceedings of the 7th Jordanian International Mechanical Engineering Conference, Amman, Jordan, 2010.
K. T. Chen, K. Ting and W. S. Yang, “Analysis of Stress Concentration Due to Irregular Ligaments in an Infinite Domain Containing a Row of Circular Holes,” Mechanics of Structures and Machines, Vol. 28, No. 1, 2000, pp. 65-84. doi:10.1081/SME-100100612
S. A. Meguid and S. X. Gong, “Stress Concentration around Interacting Circular Holes: A Comparison between Theory and Experiments,” Engineering Fracture Mechanics, Vol. 44, No. 2, 2003, pp.247-256. doi:10.1016/0013-7944(93)90049-X
N. T. Younis, “Assembly Stress for the Reduction of Stress Concentration,” Mechanics Research Communications, Vol. 33, No. 6, 2006, pp. 837-845. doi:10.1016/j.mechrescom.2006.03.007
S. J. Guo, “Stress Concentration and Buckling Behavior of Shear Loaded Composite Panels with Reinforced Cutouts,” Composite Structures, Vol. 80, No. 1, 2007, pp. 1-9. doi:10.1016/j.compstruct.2006.02.034
W. Liqing and G. Bingzheng, “Numerical Computation of Stress Intensity Factors for Bolt-Hole Corner Crack in Mechanical Joints,” Chinese Journal of Aeronautics, Vol. 21, No. 5, 2008, pp. 411-416. doi:10.1016/S1000-9361(08)60053-9
E. Dragoni and D. Castagenetti, “Concentration of Shear Stresses in Shallow Periodic Notches,” The Journal of Strain Analysis for Engineering Design, Vol. 46, No. 6, 2011, pp. 397-404. doi:10.1177/0309324711412152
D. Rees and B. Taylor, “Stress Concentrations for Slotted Plates in Bi-Axial Stress,” Engineering, Vol. 4, No. 2, 2012, pp. 69-75. doi:10.4236/eng.2012.42009
D. W. A. Rees, “Mechanics of Solids and Structures,” Imperial College Press, World Scientific, 2000.
I. R. Grosse and L. D. Mitchell, “Nonlinear Axial Stiffness Characteristics of Axisymmetric Bolted Joints,” ASME Journal of Mechanical Design, Vol. 112, No. 3, 1990, pp. 442-449. doi:10.1115/1.2912628
T. F. Lehnhoff, K. Ko and M. L. McKay, “Member Stiffness and Contact Pressure Distribution of Bolted Joints,” Journal of Mechanical Design, Vol. 116, No. 2, 1994, pp. 550-557. doi:10.1115/1.2919413
T. F. Lehnhoff and B. A. Bunyard, “Bolt Thread and Head Fillet Stress Concentration Factors,” Journal of Pressure Vessel Technology, Vol. 122, No. 2, 2000, pp. 180-185. doi:10.1115/1.556168
R. T. Barrett, “Stress Concentration Factors for Fasteners and Fastener Joints,” American Fastener Journal, Vol. 22, 2005, pp. 60-61.
S. Venkatesan and G. L. Kinzel, “Reduction of Stress Concentration in Bolt-Nut Connectors,” Journal of Mechanical Design, Vol. 128, No. 6, 2006, pp. 1337-1342. doi:10.1115/1.2336254
G. J. Turvey and P. Wang, “An FE Analysis of the Stresses in Pultruded GRP Single-Bolt Tension Joints and Their Implications for Joint Design,” Computers and Structures, Vol. 86, No. 9, 2008, pp. 1014-1021. doi:10.1016/j.compstruc.2007.04.026
F. Gao and H. Kang, “Effect of Pre-Tensioned Rock Bolts on Stress Redistribution around a Roadway,” Journal of China University of Mining and Technology, Vol. 18, No. 4, 2008, pp. 509-515. doi:10.1016/S1006-1266(08)60285-0
K. Iyer, “Solutions for Contact in Pinned Connections,” International Journal of Solids Structure, Vol. 38, No. 50-51, 2001, pp. 9133-9148. doi:10.1016/S0020-7683(01)00054-3
R. Li, D. Kellyand and A. Crosky, “A Strength Improvement by Fiber Steering around a Pin Loaded Hole,” Composite Structure, Vol. 57, No. 1-4, 2002, pp. 377-383. doi:10.1016/S0263-8223(02)00105-8
B. Okutan, “The Effect of Geometric Parameters on the Failure Strength for Pin-Loaded Multi-Directional Fiber- Glass Reinforced Epoxy Laminate,” Composites, Vol. 33, No. 8, 2002, pp. 567-578. doi:10.1016/S1359-8368(02)00054-9
C. T. McCarthy, M. A. McCarthy and V. P. Lawlor, “Progressive Damage Analysis of Multi-Bolt Composite Joints with Variable Hole Clearance,” Composites, Vol. 36, No. 4, 2005, pp. 290-305. doi:10.1016/j.compositesb.2004.11.003
V. Yavari, I. Rajabi, F. Daneshavar and M. H. Kadivar, “On the Stress Distribution around the Hole in Mechanically Fastened Joints,” Mechanics Research Communications, Vol. 36, No. 4, 2009, pp. 373-380. doi:10.1016/j.mechrescom.2008.10.005
M. H. Seleem, I. A. Sharaky and H. E. Sallam, “Flexural Behavior of Steel Beams Strengthened by Carbon Fiber Reinforced Polymer Plates-Three Dimensional Finite Element Simulation,” Materials and Design, Vol. 31, No. 3, 2010, pp. 1317-1324. doi:10.1016/j.matdes.2009.09.010
K. Narmashiri, M. Z. Jumaat and N. H. Sulong, “Investigation on End Anchoring of CFRP Strengthened Steel I-Beams,” International Journal of the Physical Sciences, Vol. 5, No. 9, 2010, pp. 1360-1371.
K. Narmashiri and M. Z. Jumaat, “Reinforced Steel I-Beams: A Comparison Between 2D and 3D Simulation,” Simulation Modeling Practice and Theory, Vol. 19, No. 1, 2011, pp.564-585. doi:10.1016/j.simpat.2010.08.012
J. W. Dally and W. F. Riley, “Experimental Stress Analysis,” Third Edition, McGraw Hill, 1991.
N. T. Younis and L. W. Zachary, “A New Technique for the Determination of Stress-Optical Constants Using the Shadow Spot Method,” Experimental Mechanics, Vol. 29, No. 1, 1989, pp. 75-79. doi:10.1007/BF02327785
Vishay Measurements Group Inc., “Calibration of Photoelastic Coatings,” Technical Note TN-701, 1977.
J. P. Holman, “Experimental Methods for Engineers,” McGraw Hill, 2001.
N. T. Younis, “Designing an Optical Force Transducer,” Optical Engineering, Vol. 42, No. 1, 2003, pp. 151-158. doi:10.1117/1.1526472
I. Alfirevic, F. Matejicek and Z. Vnucec, “Numerical Examination of the Strain Gradient Effect on Accuracy of Birefringent Coating Method,” Transactions on FAMENA, Vol. 24, 2000, pp. 11-20.
Vishay Measurements Group Inc., “Corrections to Photoelastic Coatings Fringe-Order Measurements,” Technical Note TN-706, 2005.
N. T. Younis, “Visualized Photoelastic Images for Stress Concentration Instruction” The 2010 Annual ASEE Conference, Louisville.